Author: Massidda, S.
Paper Title Page
WEP296 Effects of Errors of Velocity Tilt on Maximum Longitudinal Compression During Neutralized Drift Compression of Intense Beam Pulses 2038
 
  • I. Kaganovich, R.C. Davidson, E. Startsev
    PPPL, Princeton, New Jersey, USA
  • A. Friedman
    LLNL, Livermore, California, USA
  • S. Massidda
    Columbia University, New York, USA
 
  Funding: Research supported by the U.S. Department of Energy.
Neutralized drift compression offers an effective means for particle beam focusing and current amplification. In neutralized drift compression, a linear longitudinal velocity tilt is applied to the beam pulse, so that the beam pulse compresses as it drifts in the focusing section. The beam intensity can increase more than a factor of 100 in the longitudinal direction. We have performed an analytical study of how errors in the velocity tilt acquired by the beam in the induction bunching module limits the maximum longitudinal compression. It is found in general that the compression ratio is determined by the relative errors in the velocity tilt. That is, one-percent errors may limit the compression to a factor of one hundred. However, part of pulse where the errors are small may compress to much higher values determined by the initial thermal spread of the beam pulse. Examples of slowly varying and rapidly varying errors compared to the beam pulse duration are studied.