2011 Particle Accelerator Conference - List of Authors (Liu, C.P.)

Paper	Title	Page
TUP216	Design of a Helium Phase Separator with Condenser	1214
	F. Z. Hsiao, T.Y. Huang, C.P. Liu, H.H. Tsai NSRRC, Hsinchu, Taiwan
	This paper presents the design of a helium phase separator with volume of 100 litres. A condenser using a cryocooler for cooling is built into the phase separator to save liquid helium consumption during the test period. The heat loss to the 4.2 K inner vessel is confined within 1W due to the limited 1.5W cooling capacity from the cryocooler. Analysis of mechanical strength and heat load is illustrated.

TUP218	Design of a Liquid Helium Transfer System for the TPS Project	1220
	H.H. Tsai, M.H. Chang, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, H.C. Li, M.-C. Lin, T.F. Lin, C.P. Liu, Ch. Wang NSRRC, Hsinchu, Taiwan
	The construction of the Taiwan Photon Source (TPS) storage ring is under way, to be completed in mid 2012. The new helium cryogenic system is provided from the Linde Company, to be installed after the TPS storage ring is completed. The super conducting radio frequency (SRF) cavities is needed to maintain the electron energy of storage ring and were operated at refrigeration mode such that the cold helium gas from the cavity cryostat is returned to the refrigerator. One distribution valve box and individual segments of multichannel transfer lines is required to supply the liquid helium and liquid nitrogen to the SRF cavities and recover the gas helium and gas nitrogen back to the cryogenic system. This paper is aimed to present the configuration and design features of the LHe transfer system. The heat load and pressure drop calculation of the transfer system was also presented.

Paper

Title

Page

Design of a Helium Phase Separator with Condenser

1214

F. Z. Hsiao, T.Y. Huang, C.P. Liu, H.H. Tsai
NSRRC, Hsinchu, Taiwan

This paper presents the design of a helium phase separator with volume of 100 litres. A condenser using a cryocooler for cooling is built into the phase separator to save liquid helium consumption during the test period. The heat loss to the 4.2 K inner vessel is confined within 1W due to the limited 1.5W cooling capacity from the cryocooler. Analysis of mechanical strength and heat load is illustrated.

TUP218

Design of a Liquid Helium Transfer System for the TPS Project

1220

H.H. Tsai, M.H. Chang, S.-H. Chang, W.-S. Chiou, F. Z. Hsiao, H.C. Li, M.-C. Lin, T.F. Lin, C.P. Liu, Ch. Wang
NSRRC, Hsinchu, Taiwan

The construction of the Taiwan Photon Source (TPS) storage ring is under way, to be completed in mid 2012. The new helium cryogenic system is provided from the Linde Company, to be installed after the TPS storage ring is completed. The super conducting radio frequency (SRF) cavities is needed to maintain the electron energy of storage ring and were operated at refrigeration mode such that the cold helium gas from the cavity cryostat is returned to the refrigerator. One distribution valve box and individual segments of multichannel transfer lines is required to supply the liquid helium and liquid nitrogen to the SRF cavities and recover the gas helium and gas nitrogen back to the cryogenic system. This paper is aimed to present the configuration and design features of the LHe transfer system. The heat load and pressure drop calculation of the transfer system was also presented.