2011 Particle Accelerator Conference - List of Authors (Konecny, R.)

Paper	Title	Page
MOP008	Upgrade of the Argonne Wakefield Accelerator Facility (AWA) and Commissioning of a New RF Gun for Drive Beam Generation	115
	M.E. Conde, D.S. Doran, W. Gai, R. Konecny, W. Liu, J.G. Power, Z.M. Yusof ANL, Argonne, USA S.P. Antipov, C.-J. Jing Euclid TechLabs, LLC, Solon, Ohio, USA E.E. Wisniewski Illinois Institute of Technology, Chicago, Illinois, USA
	Funding: Work supported by the U.S. Department of Energy under contract No. DE-AC02-06CH11357. The AWA Facility is presently undergoing several upgrades that will enable it to further study wakefield acceleration driven by high charge electron beams. The facility employs an L-band photocathode RF gun to generate high charge short electron bunches, which are used to drive wakefields in dielectric loaded structures as well as in metallic structures (iris loaded, photonic band gap, etc). Several facility upgrades are underway: (a) a new RF gun with a higher quantum efficiency photocathode will replace the RF gun that has been used to generate the drive bunches; (b) the existing RF gun will be used to generate a witness beam to probe the wakefields; (c) three new L-band RF power stations, each providing 25 MW, will be added to the facility; (d) five linac structures will be added to the drive beamline, bringing the beam energy up from 15 MeV to 75 MeV. The drive beam will consist of bunch trains of up to 32 bunches spaced by 0.77 ns with up to 100 nC per bunch. The goal of future experiments is to reach accelerating gradients of several hundred MV/m and to extract RF pulses with GW power level.

MOP130	New Studies of X-band Dielectric-loaded Accelerating Structures	337
	S.H. Gold NRL, Washington, DC, USA S.P. Antipov, W. Gai, C.-J. Jing, R. Konecny, J.G. Power ANL, Argonne, USA A. Kanareykin Euclid TechLabs, LLC, Solon, Ohio, USA A.K. Kinkead Icarus Research, Inc., Bethesda, Maryland, USA
	Funding: Work supported by the DoE Office of High Energy Physics and ONR. A joint program is under way to study externally driven X-band dielectric-loaded accelerating (DLA) structures and CLIC-type power extraction structures. The structures are designed and fabricated by Argonne National Laboratory and Euclid Techlabs and tested at up to 20 MW drive power using the X-band Magnicon Facility at the Naval Research Laboratory, with additional tests carried out at SLAC. Thus far, tests have been carried out on a large variety of structures fabricated from quartz, alumina, and MCT-20, and the principal problems have been multipactor loading and rf breakdown.* Multipactor loading occurs on the inner surface of the dielectric in a region of strong normal and tangential rf electric fields; rf breakdown occurs principally at discontinuities in the dielectric. Gap-free DLA structures have been tested at 15 MV/m without breakdown. New tests are being prepared to address these two issues. New gap-free structures will make use of a metallic coating on the outer surface of the dielectric in order to permit tapering both the inner and outer diameters for rf matching, while new multipactor studies will examine the use of grooved surfaces to suppress multipactor. * C. Jing, W. Gai, J.G. Power, R. Konecny, W. Liu, S.H. Gold, A.K. Kinkead, S.G. Tantawi, V. Dolgashev, and A. Kanareykin, IEEE Trans. Plasma Sci., vol. 38, pp. 1354–1360, June 2010.

Paper

Title

Page

Upgrade of the Argonne Wakefield Accelerator Facility (AWA) and Commissioning of a New RF Gun for Drive Beam Generation

115

M.E. Conde, D.S. Doran, W. Gai, R. Konecny, W. Liu, J.G. Power, Z.M. Yusof
ANL, Argonne, USA
S.P. Antipov, C.-J. Jing
Euclid TechLabs, LLC, Solon, Ohio, USA
E.E. Wisniewski
Illinois Institute of Technology, Chicago, Illinois, USA

Funding: Work supported by the U.S. Department of Energy under contract No. DE-AC02-06CH11357.
The AWA Facility is presently undergoing several upgrades that will enable it to further study wakefield acceleration driven by high charge electron beams. The facility employs an L-band photocathode RF gun to generate high charge short electron bunches, which are used to drive wakefields in dielectric loaded structures as well as in metallic structures (iris loaded, photonic band gap, etc). Several facility upgrades are underway: (a) a new RF gun with a higher quantum efficiency photocathode will replace the RF gun that has been used to generate the drive bunches; (b) the existing RF gun will be used to generate a witness beam to probe the wakefields; (c) three new L-band RF power stations, each providing 25 MW, will be added to the facility; (d) five linac structures will be added to the drive beamline, bringing the beam energy up from 15 MeV to 75 MeV. The drive beam will consist of bunch trains of up to 32 bunches spaced by 0.77 ns with up to 100 nC per bunch. The goal of future experiments is to reach accelerating gradients of several hundred MV/m and to extract RF pulses with GW power level.

MOP130

New Studies of X-band Dielectric-loaded Accelerating Structures

337

S.H. Gold
NRL, Washington, DC, USA
S.P. Antipov, W. Gai, C.-J. Jing, R. Konecny, J.G. Power
ANL, Argonne, USA
A. Kanareykin
Euclid TechLabs, LLC, Solon, Ohio, USA
A.K. Kinkead
Icarus Research, Inc., Bethesda, Maryland, USA

Funding: Work supported by the DoE Office of High Energy Physics and ONR.
A joint program is under way to study externally driven X-band dielectric-loaded accelerating (DLA) structures and CLIC-type power extraction structures. The structures are designed and fabricated by Argonne National Laboratory and Euclid Techlabs and tested at up to 20 MW drive power using the X-band Magnicon Facility at the Naval Research Laboratory, with additional tests carried out at SLAC. Thus far, tests have been carried out on a large variety of structures fabricated from quartz, alumina, and MCT-20, and the principal problems have been multipactor loading and rf breakdown.* Multipactor loading occurs on the inner surface of the dielectric in a region of strong normal and tangential rf electric fields; rf breakdown occurs principally at discontinuities in the dielectric. Gap-free DLA structures have been tested at 15 MV/m without breakdown. New tests are being prepared to address these two issues. New gap-free structures will make use of a metallic coating on the outer surface of the dielectric in order to permit tapering both the inner and outer diameters for rf matching, while new multipactor studies will examine the use of grooved surfaces to suppress multipactor.
* C. Jing, W. Gai, J.G. Power, R. Konecny, W. Liu, S.H. Gold, A.K. Kinkead, S.G. Tantawi, V. Dolgashev, and A. Kanareykin, IEEE Trans. Plasma Sci., vol. 38, pp. 1354–1360, June 2010.