2011 Particle Accelerator Conference - List of Authors (Hannon, F.E.)

Paper	Title	Page
WEP085	Beam Breakup Studies for New Cryo-Unit	1633
	S. Ahmed, F.E. Hannon, A.S. Hofler, R. Kazimi, G.A. Krafft, F. Marhauser, B.C. Yunn JLAB, Newport News, Virginia, USA I. Shin University of Connecticut, Storrs, Connecticut, USA
	In this paper, we report the numerical simulations of cumulative beam breakup studies for a new cryo-unit for injector design at Jefferson lab. The system consists of two 1-cell and one 7-cell superconducting RF cavities. The study has been performed using a 2-dimensional time-domain code TDBBU developed in-house. The stability has been confirmed for the present setup of beamline elements with different initial offsets and currents ranging 1 mA - 100 mA.

WEP288	Optimizing the CEBAF Injector for Beam Operation with a Higher Voltage Electron Gun	2023
	F.E. Hannon, A.S. Hofler, R. Kazimi JLAB, Newport News, Virginia, USA
	Recent developments in the DC gun technology used at CEBAF have allowed an increase in operational voltage from 100kV to 130kV. In the near future this will be extended further to 200kV with the purchase of a new power supply. The injector components and layout at this time have been designed specifically for 100kV operation. It is anticipated that with an increase in gun voltage and optimization of the layout and components for 200kV operation, that the electron bunch length and beam brightness can be improved upon. This paper explores some upgrade possibilities for a 200kV gun CEBAF injector through beam dynamic simulations.

THP172	Operation and Commissioning of the Jefferson Lab UV FEL using an SRF Driver ERL	2432
	C. Tennant, S.V. Benson, G.H. Biallas, K. Blackburn, J.R. Boyce, D.B. Bullard, J.L. Coleman, C. Dickover, D. Douglas, F.K. Ellingsworth, P. Evtushenko, C.W. Gould, J.G. Gubeli, F.E. Hannon, D. Hardy, C. Hernandez-Garcia, K. Jordan, J.M. Klopf, J. Kortze, M. Marchlik, S.W. Moore, G. Neil, T. Powers, D.W. Sexton, M.D. Shinn, R.L. Walker, G.P. Williams, F.G. Wilson, S. Zhang JLAB, Newport News, Virginia, USA R.A. Legg UW-Madison/SRC, Madison, Wisconsin, USA
	Funding: Supported by the US Dept. of Energy under DoE contract number DE-AC05-060R23177. We describe the operation and commissioning of the Jefferson Lab UV FEL using a CW SRF ERL driver. Based on the same 135 MeV linear accelerator as the Jefferson Lab 10 kW IR Upgrade FEL, the UV driver ERL uses a bypass geometry to provide transverse phase space control, bunch length compression, and nonlinear aberration compensation necessitating a unique set of commissioning and operational procedures. Additionally, a novel technique to initiate lasing is described. To meet these constraints and accommodate a challenging installation schedule, we adopted a staged commissioning plan with alternating installation and operation periods. This report addresses these issues and presents operational results from on-going beam operations.

THP173	Design of the SRF Driver ERL for the Jefferson Lab UV FEL	2435
	C. Tennant, S.V. Benson, G.H. Biallas, K. Blackburn, J.R. Boyce, D.B. Bullard, J.L. Coleman, C. Dickover, D. Douglas, F.K. Ellingsworth, P. Evtushenko, C.W. Gould, J.G. Gubeli, F.E. Hannon, D. Hardy, C. Hernandez-Garcia, K. Jordan, J.M. Klopf, J. Kortze, M. Marchlik, S.W. Moore, G. Neil, T. Powers, D.W. Sexton, M.D. Shinn, R.L. Walker, F.G. Wilson, S. Zhang JLAB, Newport News, Virginia, USA
	Funding: Support by DoE Contract DE-AC05-060R23177. We describe the design of the SRF ERL providing the CW electron drive beam at the Jefferson Lab UV FEL. Based on the same 135 MeV linear accelerator as – and sharing portions of the recirculator with – the Jefferson Lab 10 kW IR Upgrade FEL, the UV driver ERL uses a novel bypass geometry to provide transverse phase space control, bunch length compression, and nonlinear aberration compensation (including correction of RF curvature effects) without the use of magnetic chicanes or harmonic RF. Stringent phase space requirements at the wiggler, low beam energy, high beam current, and use of a pre-existing facility and legacy hardware subject the design to numerous constraints. These are imposed not only by the need for both transverse and longitudinal phase space management, but also by the potential impact of collective phenomena (space charge, wakefields, beam break-up (BBU), and coherent synchrotron radiation (CSR)), and by interactions between the FEL and the accelerator RF system. This report addresses these issues and presents the accelerator design solution that now successfully supports FEL lasing.

Paper

Title

Page

Beam Breakup Studies for New Cryo-Unit

1633

S. Ahmed, F.E. Hannon, A.S. Hofler, R. Kazimi, G.A. Krafft, F. Marhauser, B.C. Yunn
JLAB, Newport News, Virginia, USA
I. Shin
University of Connecticut, Storrs, Connecticut, USA

In this paper, we report the numerical simulations of cumulative beam breakup studies for a new cryo-unit for injector design at Jefferson lab. The system consists of two 1-cell and one 7-cell superconducting RF cavities. The study has been performed using a 2-dimensional time-domain code TDBBU developed in-house. The stability has been confirmed for the present setup of beamline elements with different initial offsets and currents ranging 1 mA - 100 mA.

WEP288

Optimizing the CEBAF Injector for Beam Operation with a Higher Voltage Electron Gun

2023

F.E. Hannon, A.S. Hofler, R. Kazimi
JLAB, Newport News, Virginia, USA

Recent developments in the DC gun technology used at CEBAF have allowed an increase in operational voltage from 100kV to 130kV. In the near future this will be extended further to 200kV with the purchase of a new power supply. The injector components and layout at this time have been designed specifically for 100kV operation. It is anticipated that with an increase in gun voltage and optimization of the layout and components for 200kV operation, that the electron bunch length and beam brightness can be improved upon. This paper explores some upgrade possibilities for a 200kV gun CEBAF injector through beam dynamic simulations.

THP172

Operation and Commissioning of the Jefferson Lab UV FEL using an SRF Driver ERL

2432

C. Tennant, S.V. Benson, G.H. Biallas, K. Blackburn, J.R. Boyce, D.B. Bullard, J.L. Coleman, C. Dickover, D. Douglas, F.K. Ellingsworth, P. Evtushenko, C.W. Gould, J.G. Gubeli, F.E. Hannon, D. Hardy, C. Hernandez-Garcia, K. Jordan, J.M. Klopf, J. Kortze, M. Marchlik, S.W. Moore, G. Neil, T. Powers, D.W. Sexton, M.D. Shinn, R.L. Walker, G.P. Williams, F.G. Wilson, S. Zhang
JLAB, Newport News, Virginia, USA
R.A. Legg
UW-Madison/SRC, Madison, Wisconsin, USA

Funding: Supported by the US Dept. of Energy under DoE contract number DE-AC05-060R23177.
We describe the operation and commissioning of the Jefferson Lab UV FEL using a CW SRF ERL driver. Based on the same 135 MeV linear accelerator as the Jefferson Lab 10 kW IR Upgrade FEL, the UV driver ERL uses a bypass geometry to provide transverse phase space control, bunch length compression, and nonlinear aberration compensation necessitating a unique set of commissioning and operational procedures. Additionally, a novel technique to initiate lasing is described. To meet these constraints and accommodate a challenging installation schedule, we adopted a staged commissioning plan with alternating installation and operation periods. This report addresses these issues and presents operational results from on-going beam operations.

THP173

Design of the SRF Driver ERL for the Jefferson Lab UV FEL

2435

C. Tennant, S.V. Benson, G.H. Biallas, K. Blackburn, J.R. Boyce, D.B. Bullard, J.L. Coleman, C. Dickover, D. Douglas, F.K. Ellingsworth, P. Evtushenko, C.W. Gould, J.G. Gubeli, F.E. Hannon, D. Hardy, C. Hernandez-Garcia, K. Jordan, J.M. Klopf, J. Kortze, M. Marchlik, S.W. Moore, G. Neil, T. Powers, D.W. Sexton, M.D. Shinn, R.L. Walker, F.G. Wilson, S. Zhang
JLAB, Newport News, Virginia, USA

Funding: Support by DoE Contract DE-AC05-060R23177.
We describe the design of the SRF ERL providing the CW electron drive beam at the Jefferson Lab UV FEL. Based on the same 135 MeV linear accelerator as – and sharing portions of the recirculator with – the Jefferson Lab 10 kW IR Upgrade FEL, the UV driver ERL uses a novel bypass geometry to provide transverse phase space control, bunch length compression, and nonlinear aberration compensation (including correction of RF curvature effects) without the use of magnetic chicanes or harmonic RF. Stringent phase space requirements at the wiggler, low beam energy, high beam current, and use of a pre-existing facility and legacy hardware subject the design to numerous constraints. These are imposed not only by the need for both transverse and longitudinal phase space management, but also by the potential impact of collective phenomena (space charge, wakefields, beam break-up (BBU), and coherent synchrotron radiation (CSR)), and by interactions between the FEL and the accelerator RF system. This report addresses these issues and presents the accelerator design solution that now successfully supports FEL lasing.