2011 Particle Accelerator Conference - List of Authors (Chubar, O.V.)

Paper

Title

Page

Applications of Textured Dysprosium Concentrators in Ultra-Short Period Insertion Devices

1256

A.Y. Murokh, R.B. Agustsson, P. Frigola
RadiaBeam, Santa Monica, USA
O.V. Chubar, V. Solovyov
BNL, Upton, Long Island, New York, USA

The next generation light sources require development of the insertion devices with shorter periods and higher peak field values, well beyond the presently available designs limited by magnetic properties of conventional materials. Dysprosium (Dy) is a rare earth metal with unique ferromagnetic properties below 90 K, including saturation inductance above 3.4 Tesla. However, due to the high magnetic anisotropy of Dy, such a high level of magnetization can only be realized when the external field lies in the basal plane. This requirement is partially satisfied in the textured dysprosium presently under development at RadiaBeam and BNL. Textured Dy development status is discussed, as well as potential applications as field concentrators in the insertion devices, with particular emphasis on the next generation of cryogenically cooled short period hybrid undulators.

THOBS4

Current Status of Insertion Device Development at the NSLS-II and its Future Plans

2090

T. Tanabe, O.V. Chubar, T.M. Corwin, D.A. Harder, P. He, C.A. Kitegi, G. Rakowsky, J. Rank, C. Rhein, C.J. Spataro
BNL, Upton, Long Island, New York, USA

Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH1-886 with the U.S. Department of Energy.
National Synchrotron Light Source-II (NSLS-II) project is currently under construction. Procurement of various insertion devices (IDs) has begun. IDs in the project baseline scope include six 3.5m long damping wigglers (DWs) with 100mm period, two 2.0m Elliptically Polarizing Undulator (EPU) with 49mm period, two 3.0m-20mm period IVUs and one 1.5m-21mm IVU. Recently a special device for inelastic X-ray scattering beamline has been added to the collection of baseline devices. This is a special wide pole IVU with 22mm period for a long straight section. Three pole wigglers with 28mm gap and peak field over 1T will be utilized for NSLS bending magnet users. Examples of R&D work for future devices are: 1) Development of in-vacuum magnetic measurement system (IVMMS), 2) Use of new type of magnet such as PrFeB for improved performance on cryo-permanent magnet undulator (CPMU), 3) Development of closed loop He gas refrigerator with a linear motor actuator, 4) Adaptive gap undulator (AGU) 5) Various field measurement technique improvement. Design features of the baseline devices, ID-Magnetic Measurement Facility and the future plans for NSLS-II ID activities are described.

Slides THOBS4 [4.171 MB]

THP002

Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications

2139

A.Y. Murokh, R.B. Agustsson, S. Boucher, P. Frigola, T. Hodgetts, A.G. Ovodenko, M. Ruelas, R. Tikhoplav
RadiaBeam, Santa Monica, USA
M. Babzien, O.V. Chubar, T.V. Shaftan, V. Yakimenko
BNL, Upton, Long Island, New York, USA
I. Jovanovic
Penn State University, University Park, Pennsylvania, USA

An experiment is under way at the Accelerator Test Facility (ATF) at BNL to demonstrate inverse Compton scattering in a pulse-train regime. A photoinjector generated electron beam pulse train is scattered by a recirculating laser pulse in a novel resonant configuration termed Recirculation Injection by Nonlinear Gating (RING). The goal of the experiment is to demonstrate strong enhancement of the ICS photon flux through laser recirculation. The project status is presented, and the long-term outlook is discussed with emphasis on the medical and security applications.

THP136

Short Pulse Generation by Laser Slicing at NSLSII

2381

L.-H. Yu, A. Blednykh, O.V. Chubar, W. Guo, S. Krinsky, Y. Li, T.V. Shaftan, G.M. Wang, F.J. Willeke, L. Yang
BNL, Upton, Long Island, New York, USA

Funding: Work supported by DOE contract DE-AC02-98CH10886.
We propose an upgrade R&D project for NSLSII to generate sub-pico-second short x-ray pulses using laser slicing. In this paper we discuss the basic parameters for this system and present a specific example for a viable design and its performance. Since the installation of the laser slicing system into the storage ring will break the symmetry of the lattice, we demonstrate it is possible to recover the dynamical aperture to the original design goal of the ring.

Paper	Title	Page
TUP231	Applications of Textured Dysprosium Concentrators in Ultra-Short Period Insertion Devices	1256
	A.Y. Murokh, R.B. Agustsson, P. Frigola RadiaBeam, Santa Monica, USA O.V. Chubar, V. Solovyov BNL, Upton, Long Island, New York, USA
	The next generation light sources require development of the insertion devices with shorter periods and higher peak field values, well beyond the presently available designs limited by magnetic properties of conventional materials. Dysprosium (Dy) is a rare earth metal with unique ferromagnetic properties below 90 K, including saturation inductance above 3.4 Tesla. However, due to the high magnetic anisotropy of Dy, such a high level of magnetization can only be realized when the external field lies in the basal plane. This requirement is partially satisfied in the textured dysprosium presently under development at RadiaBeam and BNL. Textured Dy development status is discussed, as well as potential applications as field concentrators in the insertion devices, with particular emphasis on the next generation of cryogenically cooled short period hybrid undulators.

THOBS4	Current Status of Insertion Device Development at the NSLS-II and its Future Plans	2090
	T. Tanabe, O.V. Chubar, T.M. Corwin, D.A. Harder, P. He, C.A. Kitegi, G. Rakowsky, J. Rank, C. Rhein, C.J. Spataro BNL, Upton, Long Island, New York, USA
	Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH1-886 with the U.S. Department of Energy. National Synchrotron Light Source-II (NSLS-II) project is currently under construction. Procurement of various insertion devices (IDs) has begun. IDs in the project baseline scope include six 3.5m long damping wigglers (DWs) with 100mm period, two 2.0m Elliptically Polarizing Undulator (EPU) with 49mm period, two 3.0m-20mm period IVUs and one 1.5m-21mm IVU. Recently a special device for inelastic X-ray scattering beamline has been added to the collection of baseline devices. This is a special wide pole IVU with 22mm period for a long straight section. Three pole wigglers with 28mm gap and peak field over 1T will be utilized for NSLS bending magnet users. Examples of R&D work for future devices are: 1) Development of in-vacuum magnetic measurement system (IVMMS), 2) Use of new type of magnet such as PrFeB for improved performance on cryo-permanent magnet undulator (CPMU), 3) Development of closed loop He gas refrigerator with a linear motor actuator, 4) Adaptive gap undulator (AGU) 5) Various field measurement technique improvement. Design features of the baseline devices, ID-Magnetic Measurement Facility and the future plans for NSLS-II ID activities are described.
	Slides THOBS4 [4.171 MB]

THP002	Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications	2139
	A.Y. Murokh, R.B. Agustsson, S. Boucher, P. Frigola, T. Hodgetts, A.G. Ovodenko, M. Ruelas, R. Tikhoplav RadiaBeam, Santa Monica, USA M. Babzien, O.V. Chubar, T.V. Shaftan, V. Yakimenko BNL, Upton, Long Island, New York, USA I. Jovanovic Penn State University, University Park, Pennsylvania, USA
	An experiment is under way at the Accelerator Test Facility (ATF) at BNL to demonstrate inverse Compton scattering in a pulse-train regime. A photoinjector generated electron beam pulse train is scattered by a recirculating laser pulse in a novel resonant configuration termed Recirculation Injection by Nonlinear Gating (RING). The goal of the experiment is to demonstrate strong enhancement of the ICS photon flux through laser recirculation. The project status is presented, and the long-term outlook is discussed with emphasis on the medical and security applications.

THP136	Short Pulse Generation by Laser Slicing at NSLSII	2381
	L.-H. Yu, A. Blednykh, O.V. Chubar, W. Guo, S. Krinsky, Y. Li, T.V. Shaftan, G.M. Wang, F.J. Willeke, L. Yang BNL, Upton, Long Island, New York, USA
	Funding: Work supported by DOE contract DE-AC02-98CH10886. We propose an upgrade R&D project for NSLSII to generate sub-pico-second short x-ray pulses using laser slicing. In this paper we discuss the basic parameters for this system and present a specific example for a viable design and its performance. Since the installation of the laser slicing system into the storage ring will break the symmetry of the lattice, we demonstrate it is possible to recover the dynamical aperture to the original design goal of the ring.