2011 Particle Accelerator Conference - List of Authors (Borissov, E.)

Paper	Title	Page
TUP080	Tests of a Tuner for a 325 MHz SRF Spoke Resonator	973
	Y.M. Pischalnikov, E. Borissov, T.N. Khabiboulline, R.L. Madrak, R.V. Pilipenko, L. Ristori, W. Schappert Fermilab, Batavia, USA
	Funding: Work is supported by the U.S. Department of Energy Fermilab is developing 325 MHz SRF spoke cavities for the proposed ProjectX. A compact fast/slow tuner has been developed to compensate microphonics and Lorentz force detuning. The modified tuner design and results of 4K tests of the first prototype are presented.

WEP221	CW Room-Temperature Bunching Cavity for the Project X MEBT	1900
	G.V. Romanov, S. Barbanotti, E. Borissov, J.A. Coghill, I.G. Gonin, S. Kazakov, N. Solyak, V.P. Yakovlev Fermilab, Batavia, USA
	The Project-X, a multi-MW proton source based on superconducting linac, is under development at Fermilab. The front end of the linac contains a CW room temperature MEBT section which comprises ion source, RFQ and high-bandwidth bunch selective chopper. The length of the chopper exceeds 10 m, so four re-bunching cavities are used to support the beam longitudinal dynamics. The RF and mechanical designs of the re-bunching cavity including stress and thermal analysis are reported.

Paper

Title

Page

Tests of a Tuner for a 325 MHz SRF Spoke Resonator

973

Y.M. Pischalnikov, E. Borissov, T.N. Khabiboulline, R.L. Madrak, R.V. Pilipenko, L. Ristori, W. Schappert
Fermilab, Batavia, USA

Funding: Work is supported by the U.S. Department of Energy
Fermilab is developing 325 MHz SRF spoke cavities for the proposed ProjectX. A compact fast/slow tuner has been developed to compensate microphonics and Lorentz force detuning. The modified tuner design and results of 4K tests of the first prototype are presented.

WEP221

CW Room-Temperature Bunching Cavity for the Project X MEBT

1900

G.V. Romanov, S. Barbanotti, E. Borissov, J.A. Coghill, I.G. Gonin, S. Kazakov, N. Solyak, V.P. Yakovlev
Fermilab, Batavia, USA

The Project-X, a multi-MW proton source based on superconducting linac, is under development at Fermilab. The front end of the linac contains a CW room temperature MEBT section which comprises ion source, RFQ and high-bandwidth bunch selective chopper. The length of the chopper exceeds 10 m, so four re-bunching cavities are used to support the beam longitudinal dynamics. The RF and mechanical designs of the re-bunching cavity including stress and thermal analysis are reported.