• C.-J. Jing, F. Gao, A. Kanareykin, A.L. Kustov, P. Schoessow
  Euclid TechLabs, LLC, Solon, Ohio
• M.E. Conde, W. Gai, R. Konecny, J.G. Power
  ANL, Argonne
• S. Kazakov
  KEK, Ibaraki

Funding: DoE SBIR 2008 Phase II, DE-FG02-07ER84821

High frequency, high power rf sources are needed for many applications in particle accelerators, communications, radar, etc. We have developed a 26GHz high power rf source based on the extraction of wakefields from a relativistic electron beam. The extractor is designed to couple out rf power generated from a high charge electron bunch train traversing a dielectric loaded waveguide. Using a 20nC bunch train (bunch length of 1.5 mm) at the Argonne Wakefield Accelerator (AWA) facility, we expect to obtain a steady 26GHz output power of 148 MW. The extractor has been fabricated and bench tested along with a 26GHz Power detector. The first high power beam experiments should be performed prior to the Conference. Detailed results will be reported.

• A. Kanareykin, C.-J. Jing, A.L. Kustov, P. Schoessow
  Euclid TechLabs, LLC, Solon, Ohio
• W. Gai, J.G. Power
  ANL, Argonne

Funding: This work is supported by the US Department of Energy

Beam breakup (BBU) effects resulting from parasitic wakefields provide a potentially serious limitation to the performance of dielectric structure based accelerators. We report here on comprehensive numerical studies and planned experimental investigations of BBU and its mitigation in dielectric wakefield accelerators. An experimental program is planned at the Argonne Wakefield Accelerator facility that will focus on BBU measurements in a number of high gradient and high transformer ratio wakefield devices. New pickup-based beam diagnostics will provide methods for studying parasitic wakefields that are currently unavailable at the AWA. The numerical part of this research is based on a particle-Green’s function beam dynamics code (BBU-3000) that we are developing. The code allows rapid, efficient simulation of beam breakup effects in advanced linear accelerators. The goal of this work is to compare the results of detailed experimental measurements with accurate numerical results and ultimately to study the use of external FODO channels for control of the beam in the presence of strong transverse wakefields.