• J.W. Lewellen, W.B. Colson, S.P. Niles
  NPS, Monterey, California
• A.E. Bogle, T.L. Grimm
  Niowave, Inc., Lansing, Michigan
• W. Graves
  MIT, Middleton, Massachusetts
• T.I. Smith
  Stanford University, Stanford, Califormia

Funding: This research is supported by the Office of Naval Research and the Joint Technology Office.
The Naval Postgraduate School (NPS) has begun the design and assembly of the NPS Free-Electron Laser (NPS-FEL). As part of this effort, the original dc gun-based injector system is being refurbished and upgraded. As described in the accompanying paper 'Status of the NPS-FEL' (these Proceedings), the overall NPS-FEL design parameters are for 40 MeV beam energy, 1 nC bunch charge, and 1 mA average beam current, in an energy-recovery linac configuration. As we move towards this configuration, the injector system will be incrementally upgraded to add photocathode capability, have a higher final beam energy, and improve the beam brightness, to meet the demands of the overall experimental program. This paper describes the current status of the injector system, the initial set of experiments planned, and the projected upgrade path.

• J.W. Lewellen, W.B. Colson, S.P. Niles
  NPS, Monterey, California
• T.I. Smith
  Stanford University, Stanford, Califormia

Funding: This research is supported by the Office of Naval Research and the Joint Technology Office.
The Naval Postgraduate School (NPS) has begun the design and assembly of the NPS Free-Electron Laser (NPS-FEL). The basic NPS-FEL design parameters are for 40 MeV beam energy, 1 nC bunch charge, and 1 mA average beam current, in an energy-recovery linac configuration. The NPS-FEL will make use of portions of the Stanford Superconducting Accelerator (decommissioned in 2007), in particular the injector system, Stanford/Rossendorf-style cryomodules and rf system. The injector will be gradually upgraded to improve beam properties and increase the injection voltage. Each cryomodule contains two, 9-cell TESLA-type 1.3 GHz cavities, each cavity powered by an individual 10 kW cw klystron. NPS has committed to refurbishing a building for the FEL, with approximate interior vault dimensions of 7 m x 20 m x 2.5 m. The building has overall dimensions of 12 m x 49 m and will house the vault, control room, and support equipment. This paper describes the overall goals of the program, initial experimental plans, and progress to date.