Paper | Title | Other Keywords | Page |
---|---|---|---|
TUPMR044 | Beam Test of the New Beamline for Radio-Isotope Production at KOMAC | target, vacuum, linac, proton | 1349 |
|
|||
Funding: This work has been supported through KOMAC (Korea Multi-purpose Accelerator Complex) operation fund of KAERI by MSIP (Ministry of Science, ICT and Future Planning). A high power proton linac is under operation at Korea multi-purpose accelerator complex (KOMAC). Currently, two beamlines are available and used to provide 20-MeV beam and 100-MeV beam to users from various fields. An additional 100-MeV beamline has been constructed mainly for production of radio-isotopes such as Sr-82 and Cu-67. Proton beam with the beam energy of 100 MeV and the average current of 0.6 mA is directed to the production target, which is located in a water-filled target chamber, through a beam window made of AlBeMet. The beam size at the target is designed to be about 100 mm in diameter. Installation of the beamline components including 1.5 T bending magnet and the beam diagnostic devices such as BPM and BCM is finished and beam commissioning is planned to start in early 2016. The details of newly-constructed beamline and the initial beam test results will be given in this paper. |
|||
DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR044 | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||
TUPMR055 | Solid Targetry for the Isotope Production Facility at the KOMAC 100 MeV Linac | target, proton, coupling, shielding | 1384 |
|
|||
Funding: *This work was supported by the Ministry of Science, ICT and Future Planning of the Korean Government. The construction of the isotope production facility was recently completed on the 100 MeV proton linac at the KOMAC (Korea multi-purpose accelerator complex). To produce the Sr-82 and Cu-67, we have prepared the solid targetry which consist of target transportation system , target cooling system and a hot-cell for remote handling. The Isotope production targets are made of RbCl pellet and stainless steel cladding. For the proton beam irradiation, the targets are transported by target drive system which consist of drive chain and guide rail by remotely. In this paper, we will report the detailed design, fabrication and operation status of the solid targetry at the KOMAC isotope production facility. |
|||
DOI • | reference for this paper ※ DOI:10.18429/JACoW-IPAC2016-TUPMR055 | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | ||