IPAC2015 - List of Authors (Yamamoto, A.)

Paper	Title	Page
WEPMA046	Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity	2869
	K. Nohara, N. Kawabata, K. Miyajima, M. Shinohara SPS, Funabashi-shi, Japan H. Hayano, S. Kato, T. Saeki, A. Yamamoto, M. Yamanaka KEK, Ibaraki, Japan
	Pure Nb as the material of SRF cavity bears hard workability in general. This is why both the inner and outer conductors of HOM coupler for 9-cell cavity have been conventionally produced by full machining, backward extrusion accompanied with annealing and so on. However, in the mass production of 9-cell cavities in ILC, further cost reduction is required. We produced both the inner and outer conductors of HOM coupler for 9-cell cavity in the advanced press forming methods aiming at cost reduction. Press forming of a pure Nb sheet for the outer conductor of HOM coupler was performed with fewer processes free from intermediate annealing and primary machining. For the inner conductor of HOM coupler, water jet cutting and press cold-forging of a plate was performed. The above advanced press forming methods showed favored results, leading to a possibility of simple mass-production of components and cost reduction. The vertical test on a 9-cell cavity with the press formed HOM couplers achieved 36 MV/m that is beyond ILC qualification. The R＆D works are ongoing for further improvement.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA046
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity

2869

K. Nohara, N. Kawabata, K. Miyajima, M. Shinohara
SPS, Funabashi-shi, Japan
H. Hayano, S. Kato, T. Saeki, A. Yamamoto, M. Yamanaka
KEK, Ibaraki, Japan

Pure Nb as the material of SRF cavity bears hard workability in general. This is why both the inner and outer conductors of HOM coupler for 9-cell cavity have been conventionally produced by full machining, backward extrusion accompanied with annealing and so on. However, in the mass production of 9-cell cavities in ILC, further cost reduction is required. We produced both the inner and outer conductors of HOM coupler for 9-cell cavity in the advanced press forming methods aiming at cost reduction. Press forming of a pure Nb sheet for the outer conductor of HOM coupler was performed with fewer processes free from intermediate annealing and primary machining. For the inner conductor of HOM coupler, water jet cutting and press cold-forging of a plate was performed. The above advanced press forming methods showed favored results, leading to a possibility of simple mass-production of components and cost reduction. The vertical test on a 9-cell cavity with the press formed HOM couplers achieved 36 MV/m that is beyond ILC qualification. The R＆D works are ongoing for further improvement.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA046

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)