Author: Tordeux, M.-A.
Paper Title Page
MOPWA012 Study of Optimal MBA Lattice Structures for the SOLEIL Upgrade 106
 
  • R. Nagaoka, P. Brunelle, F.J. Cullinan, X.N. Gavaldà, A. Loulergue, A. Nadji, L.S. Nadolski, M.-A. Tordeux
    SOLEIL, Gif-sur-Yvette, France
 
  Within the context of a future upgrade of the SOLEIL ring, a series of lattice studies has been made with the aim of reducing the current 4 nm-rad horizontal emittance ex by more than an order of magnitude, with a dynamic aperture allowing off-axis injection. As in most upgrades, the important constraint imposed is to keep all the existing straight sections and photon source points. A particularity of SOLEIL are the short straight sections in half of the 16 double-bend cells, created in between the dipoles, which limits the number of dipoles in a MBA cell. In the previous studies, a combination of 5- and 4BA was followed, where with the use of longitudinal gradient bends (LGBs), ex ~440 pm-rad was obtained. The present paper reports on studies extended along the same strategy: In particular, the feasibility and the attainable ex are pursued with a combination of 7- and 6BA, by employing dipoles with transverse gradient and LGBs. In addition, the effectiveness of a few known nonlinear optimization methods, such as the resonance driving term cancellation, interleaved sextupoles with proper phases, and genetic algorithm-based numerical searches shall be explored.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPWA012  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPHA009 Single-Shot Electro-Optic Sampling Combined With Photonic Time-Stretch: Detailed Results at SOLEIL 795
 
  • C. Szwaj, C. Evain, E. Roussel
    PhLAM/CERLA, Villeneuve d'Ascq, France
  • S. Bielawski
    PhLAM/CERCLA, Villeneuve d'Ascq Cedex, France
  • J.B. Brubach, L. Cassinari, M.-E. Couprie, M. Labat, L. Manceron, J.P. Ricaud, P. Roy, M.-A. Tordeux
    SOLEIL, Gif-sur-Yvette, France
  • M. Le Parquier
    CERLA, Villeneuve d'Ascq, France
 
  Funding: ANR (DYNACO project), FEDER, CEMPI LABEX.
Single-shot recording of pulses is possible with high repetition rates (more than 80 MHz), as was demonstrated in the framework of a PhLAM-SOLEIL collaboration * **. This can be achieved by a relatively simple upgrade of existing setups based on spectral encoding. The strategy consists to encode the sub-picosecond information into the time domain, but at a slower scale (nanoseconds), using dispersion in a long optical fiber. Then the information is recorded by a photodiode connected to an oscilloscope. In this poster, we present guidelines for the practical realization of the electro-optical setup, as well as a performance analysis. In particular, we analyze the temporal resolution and compare it to the classical electro-optical sampling setup.
* E. Roussel et al., Proceedings of IPAC2014, THOBA01.
** E. Roussel et al., arXiv:1410.7048
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPHA009  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPWA012 SOLEIL Status Report 1419
 
  • A. Nadji, Y.-M. Abiven, F. Bouvet, P. Brunelle, A. Buteau, N. Béchu, L. Cassinari, M.-E. Couprie, X. Delétoille, C. Herbeaux, N. Hubert, N. Jobert, M. Labat, J.-F. Lamarre, P. Lebasque, A. Lestrade, A. Loulergue, P. Marchand, O. Marcouillé, J.L. Marlats, L.S. Nadolski, R. Nagaoka, P. Prigent, K.T. Tavakoli, M.-A. Tordeux, M. Valléau
    SOLEIL, Gif-sur-Yvette, France
 
  The 2.75 GeV synchrotron light source SOLEIL (France) delivers photons to 27 beamlines and 2 new ones are under construction. The commissioning of the Femtoslicing operation mode involving two beamlines is in progress. The uniform filling pattern is now available to users with a 500 mA stored beam current. The operation of the two canted and long beamlines ANATOMIX and Nanoscopium both using in-vacuum insertion devices (IDs) as a photon source has been raising challenges still under investigation. Upgrades of crucial subsystem equipment like magnet power supplies, storage ring RF input power couplers, and solid state amplifiers are continuing. New user requests for beam stability are under upgrade consideration. Other projects for the storage ring are ongoing such as the design and construction of new insertion devices, new multipole injection kicker, localised small and round photon beam production, as well as R&D on 500 MHz solid-state amplifiers. In parallel first studies for a future upgrade of the machine have been progressing.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWA012  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)