IPAC2015 - List of Authors (Tejima, M.)

Paper	Title	Page
MOPHA058	Beam Based Gain Calibration for Beam Position Monitor at J-PARC Main Ring	927
	H. Kuboki, J. Takano, M. Tejima, T. Toyama KEK, Ibaraki, Japan S. Hatakeyama JAEA/J-PARC, Tokai-mura, Japan
	Funding: MEXT KAKENHI Grant Number 25105002, Grant-in-Aid for Scientific Research on Innovative Areas titled "Unification and Development of the Neutrino Science Frontier" Beam Position Monitor (BPM) is one of the essential elements in a synchrotron facility. It provides the accurate beam positions, which are used to correct the closed orbit distortion. Each BPM is installed with the electronics which enable to acquire the data of the turn-by-turn beam positions. Here, we define the "gain" as the proportionality coefficient between the signal detected at the ADC and the ideal signal without any errors. The signal strength from a BPM electrode varies depending on 1) transmission characteristics of a long cable, 2) processing circuit, and 3) contact resistance at the connected parts. These are the origin of the gain deviations. In order to correct the deviations, a Beam Based Gain Calibration (BBGC) method has been proposed . Development of a new method for adequate gain calibration is required because any calibration method for routine operation has not been established for BPMs with diagonal-cut electrodes used at J-PARC Main Ring. The results of analysis will be presented using the Total Least Square fitting as an adequate method for the BBGC with sufficient accuracy within 0.6% in one standard deviation. M. Tejima et al., DIPAC2011 (2011).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPHA058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Based Gain Calibration for Beam Position Monitor at J-PARC Main Ring

927

H. Kuboki, J. Takano, M. Tejima, T. Toyama
KEK, Ibaraki, Japan
S. Hatakeyama
JAEA/J-PARC, Tokai-mura, Japan

Funding: MEXT KAKENHI Grant Number 25105002, Grant-in-Aid for Scientific Research on Innovative Areas titled "Unification and Development of the Neutrino Science Frontier"
Beam Position Monitor (BPM) is one of the essential elements in a synchrotron facility. It provides the accurate beam positions, which are used to correct the closed orbit distortion. Each BPM is installed with the electronics which enable to acquire the data of the turn-by-turn beam positions. Here, we define the "gain" as the proportionality coefficient between the signal detected at the ADC and the ideal signal without any errors. The signal strength from a BPM electrode varies depending on 1) transmission characteristics of a long cable, 2) processing circuit, and 3) contact resistance at the connected parts. These are the origin of the gain deviations. In order to correct the deviations, a Beam Based Gain Calibration (BBGC) method has been proposed *. Development of a new method for adequate gain calibration is required because any calibration method for routine operation has not been established for BPMs with diagonal-cut electrodes used at J-PARC Main Ring. The results of analysis will be presented using the Total Least Square fitting as an adequate method for the BBGC with sufficient accuracy within 0.6% in one standard deviation.
* M. Tejima et al., DIPAC2011 (2011).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPHA058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)