IPAC2015 - List of Authors (Tamura, F.)

Paper	Title	Page
MOAD1	Development of High Gradient RF System for J-PARC Upgrade	50
	C. Ohmori, K. Hara, K. Hasegawa, M. Toda, M. Yoshii KEK, Tokai, Ibaraki, Japan M. Nomura, T. Shimada, F. Tamura, M. Yamamoto JAEA/J-PARC, Tokai-mura, Japan A. Schnase GSI, Darmstadt, Germany
	A new 5-cell cavity has been developed for the upgrade of the J-PARC Main Ring. In the cavity, high impedance magnetic alloy - Finemet FT3L, cores are loaded. The cavity was installed and has been used for the 250 kW beam operation. The cavity is operated with the RF voltage of 70 kV which is two times higher voltage than the present cavities. Eight more cavities will be assembled and installed in the next two years to increase the repetition rate of the Main Ring. This paper describes status of cavity operation under the beam loading and status of the mass productions of the cavities.
	Slides MOAD1 [2.551 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOAD1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY003	Measurement of Momentum Spread of the Injection Beam with Longitudinal Tomography Method in the J-PARC RCS	944
	M. Yoshimoto, H. Harada, H. Hotchi, M. Kinsho, P.K. Saha, F. Tamura, M. Yamamoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
	In the J-PARC RCS, the beam tuning toward the design output beam power of 1MW were started after the completing of the beam energy and beam current upgrades in the LINAC. One of the important issues to achieve the 1MW beam operation is the optimization of the injection beam from the LINAC. Due to the longitudinal beam tuning in the LINAC, the momentum spread of the injected beam into the RCS was measured with the longitudinal tomography method. Our longitudinal tomography tool had been developed using the simple algorithm with the Convolution Back-Projection (CBP) method for the beam storage mode of the RCS. Accordingly, we improved this tool to expand into the acceleration mode.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development of High Gradient RF System for J-PARC Upgrade

50

C. Ohmori, K. Hara, K. Hasegawa, M. Toda, M. Yoshii
KEK, Tokai, Ibaraki, Japan
M. Nomura, T. Shimada, F. Tamura, M. Yamamoto
JAEA/J-PARC, Tokai-mura, Japan
A. Schnase
GSI, Darmstadt, Germany

A new 5-cell cavity has been developed for the upgrade of the J-PARC Main Ring. In the cavity, high impedance magnetic alloy - Finemet FT3L, cores are loaded. The cavity was installed and has been used for the 250 kW beam operation. The cavity is operated with the RF voltage of 70 kV which is two times higher voltage than the present cavities. Eight more cavities will be assembled and installed in the next two years to increase the repetition rate of the Main Ring. This paper describes status of cavity operation under the beam loading and status of the mass productions of the cavities.

Slides MOAD1 [2.551 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOAD1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTY003

Measurement of Momentum Spread of the Injection Beam with Longitudinal Tomography Method in the J-PARC RCS

944

M. Yoshimoto, H. Harada, H. Hotchi, M. Kinsho, P.K. Saha, F. Tamura, M. Yamamoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan

In the J-PARC RCS, the beam tuning toward the design output beam power of 1MW were started after the completing of the beam energy and beam current upgrades in the LINAC. One of the important issues to achieve the 1MW beam operation is the optimization of the injection beam from the LINAC. Due to the longitudinal beam tuning in the LINAC, the momentum spread of the injected beam into the RCS was measured with the longitudinal tomography method. Our longitudinal tomography tool had been developed using the simple algorithm with the Convolution Back-Projection (CBP) method for the beam storage mode of the RCS. Accordingly, we improved this tool to expand into the acceleration mode.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPTY003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)