IPAC2015 - List of Authors (Schnizer, P.)

Paper	Title	Page
WEPMA019	Status of the Super-FRS Magnet Devlopment for Fair	2792
	H. Müller, E.S. Fischer, H. Leibrock, P. Schnizer, M. Winkler GSI, Darmstadt, Germany J.-E. Munoz-Garcia, L. Quettier CEA/IRFU, Gif-sur-Yvette, France L. Serio CERN, Geneva, Switzerland
	The Super FRS is a two-stage in flight separator to be built next to the site of GSI, Darmstadt, Germany as part of FAIR (Facility for Anti-proton and Ion Research). Its purpose is to create and separate rare isotope beams and to enable the mass measurement also for very short lived nuclei. Due to its three branches a wide variety of experiments can be carried out in frame of the NUSTAR collaboration. Due to the large acceptance needed, the magnets of the Super-FRS have to have a large aperture and therefore only a superconducting solution is feasible. A superferric design with superconducting coils was chosen in which the magnetic field is shaped by an iron yoke. We will present the actual design status of the dipole- and multipole magnets as well as the status of the development of the dedicated test facility at CERN.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA020	SIS100 Dipole Field Harmonics and Dynamic Aperture Calculations	2795
	C. Omet, E.S. Fischer, G. Franchetti, V. Kornilov, A. Mierau, C. Roux, P. Schnizer, D. Schäfer, S. Sorge, P.J. Spiller, K. Sugita GSI, Darmstadt, Germany
	During the acceptance test of the First of Series (FoS) SIS100 super-ferric dipole, detailed field measurements have been done. The harmonic coefficients have been extracted from these and dynamic aperture simulations have been done which are presented here. Furthermore, geometric precision measurement tools for the magnet have been developed to track down the field errors to geometric errors. Finally, mitigation actions have been taken to reduce these errors during manufacturing to ensure the design beam survival rate in SIS100.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA023	Advanced Multipoles and Appropriated Measurement Tools for Field Characterization of SIS100 Magnets	2805
	P. Schnizer, E.S. Fischer, A. Gottsmann, F. Kaether, A. Mierau, H.G. Weiss GSI, Darmstadt, Germany B. Schnizer TUG/ITP, Graz, Austria
	The heavy ion synchrotron SIS100 utilises fast ramped superconducting magnets. Describing and measuring these magnets requires advanced multipoles next to well adapted measurement techniques. We cover briefly the required theory adapted to the measurements, show which designs were available and which decisions had to be taken for measuring curved superconducting magnets. The series of SIS100 dipole magnets is going to be produced. These magnets will be measured at GSI. We present the foreseen field measurement procedure, outline the currently ongoing tests and give our calibration strategy.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA023
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF015	Status of the FAIR Heavy Ion Synchrotron Project SIS100	3715
	P.J. Spiller, U. Blell, L.H.J. Bozyk, J. Ceballos Velasco, T. Eisel, E.S. Fischer, O.K. Kester, H.G. König, H. Kollmus, V. Kornilov, P. Kowina, J.P. Meier, A. Mierau, C. Mühle, C. Omet, D. Ondreka, N. Pyka, H.R. Ramakers, P. Rottländer, C. Roux, P. Schnizer, St. Wilfert GSI, Darmstadt, Germany
	The procurements of major technical components for the heavy ion synchrotron SIS100 are progressing. Especially the production of the long lead items, the main superconducting dipole and quadrupole magnets and the main Rf systems could be started. The system layout for the injection system and the specifications for all injection devices has been completed. In parallel, the Digital Mock-Up (DMU) and design for major extraction components has been developed. Certain technical challenges observed during the acceptance tests of First of Series (FOS) components and risks and their mitigation will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the Super-FRS Magnet Devlopment for Fair

2792

H. Müller, E.S. Fischer, H. Leibrock, P. Schnizer, M. Winkler
GSI, Darmstadt, Germany
J.-E. Munoz-Garcia, L. Quettier
CEA/IRFU, Gif-sur-Yvette, France
L. Serio
CERN, Geneva, Switzerland

The Super FRS is a two-stage in flight separator to be built next to the site of GSI, Darmstadt, Germany as part of FAIR (Facility for Anti-proton and Ion Research). Its purpose is to create and separate rare isotope beams and to enable the mass measurement also for very short lived nuclei. Due to its three branches a wide variety of experiments can be carried out in frame of the NUSTAR collaboration. Due to the large acceptance needed, the magnets of the Super-FRS have to have a large aperture and therefore only a superconducting solution is feasible. A superferric design with superconducting coils was chosen in which the magnetic field is shaped by an iron yoke. We will present the actual design status of the dipole- and multipole magnets as well as the status of the development of the dedicated test facility at CERN.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA020

SIS100 Dipole Field Harmonics and Dynamic Aperture Calculations

2795

C. Omet, E.S. Fischer, G. Franchetti, V. Kornilov, A. Mierau, C. Roux, P. Schnizer, D. Schäfer, S. Sorge, P.J. Spiller, K. Sugita
GSI, Darmstadt, Germany

During the acceptance test of the First of Series (FoS) SIS100 super-ferric dipole, detailed field measurements have been done. The harmonic coefficients have been extracted from these and dynamic aperture simulations have been done which are presented here. Furthermore, geometric precision measurement tools for the magnet have been developed to track down the field errors to geometric errors. Finally, mitigation actions have been taken to reduce these errors during manufacturing to ensure the design beam survival rate in SIS100.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA023

Advanced Multipoles and Appropriated Measurement Tools for Field Characterization of SIS100 Magnets

2805

P. Schnizer, E.S. Fischer, A. Gottsmann, F. Kaether, A. Mierau, H.G. Weiss
GSI, Darmstadt, Germany
B. Schnizer
TUG/ITP, Graz, Austria

The heavy ion synchrotron SIS100 utilises fast ramped superconducting magnets. Describing and measuring these magnets requires advanced multipoles next to well adapted measurement techniques. We cover briefly the required theory adapted to the measurements, show which designs were available and which decisions had to be taken for measuring curved superconducting magnets. The series of SIS100 dipole magnets is going to be produced. These magnets will be measured at GSI. We present the foreseen field measurement procedure, outline the currently ongoing tests and give our calibration strategy.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA023

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF015

Status of the FAIR Heavy Ion Synchrotron Project SIS100

3715

P.J. Spiller, U. Blell, L.H.J. Bozyk, J. Ceballos Velasco, T. Eisel, E.S. Fischer, O.K. Kester, H.G. König, H. Kollmus, V. Kornilov, P. Kowina, J.P. Meier, A. Mierau, C. Mühle, C. Omet, D. Ondreka, N. Pyka, H.R. Ramakers, P. Rottländer, C. Roux, P. Schnizer, St. Wilfert
GSI, Darmstadt, Germany

The procurements of major technical components for the heavy ion synchrotron SIS100 are progressing. Especially the production of the long lead items, the main superconducting dipole and quadrupole magnets and the main Rf systems could be started. The system layout for the injection system and the specifications for all injection devices has been completed. In parallel, the Digital Mock-Up (DMU) and design for major extraction components has been developed. Certain technical challenges observed during the acceptance tests of First of Series (FOS) components and risks and their mitigation will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)