IPAC2015 - List of Authors (Schmidt, J.S.)

Paper	Title	Page
MOAC1	Awake: the Proof-of-principle R&D Experiment at CERN	34
	P. Muggli MPI, Muenchen, Germany M. Bernardini, T. Bohl, C. Bracco, A.C. Butterworth, S. Cipiccia, H. Damerau, S. Döbert, V. Fedosseev, E. Feldbaumer, E. Gschwendtner, W. Höfle, A. Pardons, A.V. Petrenko, J.S. Schmidt, M. Turner, H. Vincke CERN, Geneva, Switzerland
	The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) is a proof-of-principle R&D experiment at CERN. It is the world’s first proton driven plasma wakefield acceleration experiment, using a high-energy proton bunch to drive a plasma wakefield for electron beam acceleration. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV proton beam bunches from the SPS, which will be sent to a plasma source. An electron beam will be injected into the plasma cell to probe the accelerating wakefield. Challenging modifications in the area and new installations are required for AWAKE. First proton beam to the experiment is expected late 2016. The accelerating electron physics will start late 2017. This paper gives an overview of the project from a physics and engineering point of view, it describes the main activities, the milestones, the organizational set-up for the project management and coordination.
	Slides MOAC1 [21.632 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOAC1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY039	LHC Transfer Lines and Injection Tests for Run 2	2098
	C. Bracco, J.L. Abelleira, R. Alemany-Fernández, M.J. Barnes, W. Bartmann, E. Carlier, L.N. Drøsdal, M.A. Fraser, K. Fuchsberger, B. Goddard, J. Jentzsch, V. Kain, N. Magnin, M. Meddahi, J.S. Schmidt, L.S. Stoel, J.A. Uythoven, F.M. Velotti, J. Wenninger CERN, Geneva, Switzerland
	The transfer lines for both rings of the LHC were successfully re-commissioned with beam in preparation for the start-up of Run 2. This paper presents an overview of the transfer line and sector tests performed to bring the LHC back into operation after a two-year period of shutdown for consolidation and upgrade. The tests enabled the debugging of critical software and hardware systems and validated changes made to the transfer and injection systems. The beam-based measurements carried out to validate the optics and machine configuration are summarised along with the performance of the hardware systems.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWA003	Simulations of Electron-Proton Beam Interaction before Plasma in the AWAKE Experiment	2492
	U. Dorda, R.W. Aßmann, J. Grebenyuk DESY, Hamburg, Germany C. Bracco, A.V. Petrenko, J.S. Schmidt CERN, Geneva, Switzerland
	The on-axis injection of electron bunches in the proton-driven plasma wake at the AWAKE experiment at CERN implies co-propagation of a low-energy electron beam with the long high-energy proton beam in a common beam pipe over several meters upstream of the plasma chamber. The possible effects of the proton-induced wakefields on the electron bunch phase space in the common beam pipe region may have crucial implications for subsequent electron trapping and acceleration in plasma. We present the CST Studio simulations of the tentative common beam pipe setup and the two beam co-propagating in it. Simulated effects of the proton wakefields on electrons are analysed and compared to analytical predictions.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWA003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWA039	The AWAKE Electron Primary Beam Line	2584
	J.S. Schmidt, J. Bauche, B. Biskup, C. Bracco, E. Bravin, S. Döbert, M.A. Fraser, B. Goddard, E. Gschwendtner, L.K. Jensen, O.R. Jones, S. Mazzoni, M. Meddahi, A.V. Petrenko, F.M. Velotti, A.S. Vorozhtsov CERN, Geneva, Switzerland U. Dorda DESY, Hamburg, Germany L. Merminga, V.A. Verzilov TRIUMF, Vancouver, Canada P. Muggli MPI, Muenchen, Germany
	The AWAKE project at CERN is planned to study proton driven plasma wakefield acceleration. The proton beam from the SPS will be used in order to drive wakefields in a 10 m long Rb plasma cell. In the first phase of this experiment, scheduled in 2016, the self-modulation of the proton beam in the plasma will be studied in detail, while in the second phase an external electron beam will be injected into the plasma wakefield to probe the acceleration process. The installation of AWAKE in the former CNGS experimental area and the required optics flexibility define the tight boundary conditions to be fulfilled by the electron beam line design. The transport of low energy (10-20 MeV) bunches of 1.25·10⁹ electrons and the synchronous copropagation with much higher intensity proton bunches (3E11) determines several technological and operational challenges for the magnets and the beam diagnostics. The current status of the electron line layout and the associated equipments are presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWA039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Awake: the Proof-of-principle R&D Experiment at CERN

34

P. Muggli
MPI, Muenchen, Germany
M. Bernardini, T. Bohl, C. Bracco, A.C. Butterworth, S. Cipiccia, H. Damerau, S. Döbert, V. Fedosseev, E. Feldbaumer, E. Gschwendtner, W. Höfle, A. Pardons, A.V. Petrenko, J.S. Schmidt, M. Turner, H. Vincke
CERN, Geneva, Switzerland

The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) is a proof-of-principle R&D experiment at CERN. It is the world’s first proton driven plasma wakefield acceleration experiment, using a high-energy proton bunch to drive a plasma wakefield for electron beam acceleration. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV proton beam bunches from the SPS, which will be sent to a plasma source. An electron beam will be injected into the plasma cell to probe the accelerating wakefield. Challenging modifications in the area and new installations are required for AWAKE. First proton beam to the experiment is expected late 2016. The accelerating electron physics will start late 2017. This paper gives an overview of the project from a physics and engineering point of view, it describes the main activities, the milestones, the organizational set-up for the project management and coordination.

Slides MOAC1 [21.632 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOAC1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY039

LHC Transfer Lines and Injection Tests for Run 2

2098

C. Bracco, J.L. Abelleira, R. Alemany-Fernández, M.J. Barnes, W. Bartmann, E. Carlier, L.N. Drøsdal, M.A. Fraser, K. Fuchsberger, B. Goddard, J. Jentzsch, V. Kain, N. Magnin, M. Meddahi, J.S. Schmidt, L.S. Stoel, J.A. Uythoven, F.M. Velotti, J. Wenninger
CERN, Geneva, Switzerland

The transfer lines for both rings of the LHC were successfully re-commissioned with beam in preparation for the start-up of Run 2. This paper presents an overview of the transfer line and sector tests performed to bring the LHC back into operation after a two-year period of shutdown for consolidation and upgrade. The tests enabled the debugging of critical software and hardware systems and validated changes made to the transfer and injection systems. The beam-based measurements carried out to validate the optics and machine configuration are summarised along with the performance of the hardware systems.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWA003

Simulations of Electron-Proton Beam Interaction before Plasma in the AWAKE Experiment

2492

U. Dorda, R.W. Aßmann, J. Grebenyuk
DESY, Hamburg, Germany
C. Bracco, A.V. Petrenko, J.S. Schmidt
CERN, Geneva, Switzerland

The on-axis injection of electron bunches in the proton-driven plasma wake at the AWAKE experiment at CERN implies co-propagation of a low-energy electron beam with the long high-energy proton beam in a common beam pipe over several meters upstream of the plasma chamber. The possible effects of the proton-induced wakefields on the electron bunch phase space in the common beam pipe region may have crucial implications for subsequent electron trapping and acceleration in plasma. We present the CST Studio simulations of the tentative common beam pipe setup and the two beam co-propagating in it. Simulated effects of the proton wakefields on electrons are analysed and compared to analytical predictions.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWA003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWA039

The AWAKE Electron Primary Beam Line

2584

J.S. Schmidt, J. Bauche, B. Biskup, C. Bracco, E. Bravin, S. Döbert, M.A. Fraser, B. Goddard, E. Gschwendtner, L.K. Jensen, O.R. Jones, S. Mazzoni, M. Meddahi, A.V. Petrenko, F.M. Velotti, A.S. Vorozhtsov
CERN, Geneva, Switzerland
U. Dorda
DESY, Hamburg, Germany
L. Merminga, V.A. Verzilov
TRIUMF, Vancouver, Canada
P. Muggli
MPI, Muenchen, Germany

The AWAKE project at CERN is planned to study proton driven plasma wakefield acceleration. The proton beam from the SPS will be used in order to drive wakefields in a 10 m long Rb plasma cell. In the first phase of this experiment, scheduled in 2016, the self-modulation of the proton beam in the plasma will be studied in detail, while in the second phase an external electron beam will be injected into the plasma wakefield to probe the acceleration process. The installation of AWAKE in the former CNGS experimental area and the required optics flexibility define the tight boundary conditions to be fulfilled by the electron beam line design. The transport of low energy (10-20 MeV) bunches of 1.25·10⁹ electrons and the synchronous copropagation with much higher intensity proton bunches (3E11) determines several technological and operational challenges for the magnets and the beam diagnostics. The current status of the electron line layout and the associated equipments are presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWA039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)