IPAC2015 - List of Authors (Ratti, A.)

Paper	Title	Page
MOBD2	Design and Prototyping of HL-LHC Double Quarter Wave Crab Cavities for SPS Test	64
	S. Verdú-Andrés, S.A. Belomestnykh, I. Ben-Zvi, J. Skaritka, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA L. Alberty, K. Artoos, R. Calaga, O. Capatina, T. Capelli, F. Carra, N. Kuder, R. Leuxe, C. Zanoni CERN, Geneva, Switzerland S.A. Belomestnykh, I. Ben-Zvi Stony Brook University, Stony Brook, USA Z. Li SLAC, Menlo Park, California, USA A. Ratti LBNL, Berkeley, California, USA
	Funding: Work supported by US DOE via US LARP program, through BSA LLC contract No.DE-AC02-98CH10886 and by EU FP7 HiLumi LHC grant No.284404. Used NERSC resources by US DOE contract No.DE-AC02-05CH11231. The LHC high luminosity project envisages the use of the crabbing technique for increasing and levelling the LHC luminosity. Double-Quarter Wave (DQW) resonators are compact cavities especially designed to meet the technical and performance requirements for LHC beam crabbing. A couple of DQW crab cavities are under preparation and will be tested with beam in the Super Proton Synchrotron (SPS) of CERN by 2017. This paper describes the design and prototyping of DQW crab cavities for the SPS test.
	Slides MOBD2 [6.909 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOBD2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPWI021	The LCLS-II LLRF System	1195
	C. Hovater, R. Bachimanchi JLab, Newport News, Virginia, USA S. Babel, B. Hong, D. Van Winkle SLAC, Menlo Park, California, USA B.E. Chase, E. Cullerton, P. Varghese Fermilab, Batavia, Illinois, USA L.R. Doolittle, G. Huang, A. Ratti, C. Serrano LBNL, Berkeley, California, USA
	Funding: This work was supported by the LCLS-II Project and the U.S. Department of Energy, Contract DE-AC02-76SF00515. The SLAC National Accelerator Laboratory is planning an upgrade (LCLS-II) to the Linear Coherent Light Source with a 4 GeV CW superconducting (SCRF) linac. The SCRF linac consists of 35 ILC style cryomodules (eight cavities each) for a total of 280 cavities. Expected cavity gradients are 16 MV/m with a loaded QL of ~ 4x10⁷. The RF system will have 3.8 kW solid state amplifiers driving single cavities. To ensure optimum field stability a single source single cavity control system has been chosen. It consists of a precision four channel cavity receiver and RF stations (Forward, Reflected and Drive signals). In order to regulate the resonant frequency variations of the cavities due to He pressure, the tuning of each cavity is controlled by a Piezo actuator and a slow stepper motor. In addition the system (LLRF-amplifier-cavity) is being modeled and cavity microphonic testing has started. This paper describes the LLRF system under consideration, including recent modeling and cavity tests.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPWI021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Prototyping of HL-LHC Double Quarter Wave Crab Cavities for SPS Test

64

S. Verdú-Andrés, S.A. Belomestnykh, I. Ben-Zvi, J. Skaritka, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
L. Alberty, K. Artoos, R. Calaga, O. Capatina, T. Capelli, F. Carra, N. Kuder, R. Leuxe, C. Zanoni
CERN, Geneva, Switzerland
S.A. Belomestnykh, I. Ben-Zvi
Stony Brook University, Stony Brook, USA
Z. Li
SLAC, Menlo Park, California, USA
A. Ratti
LBNL, Berkeley, California, USA

Funding: Work supported by US DOE via US LARP program, through BSA LLC contract No.DE-AC02-98CH10886 and by EU FP7 HiLumi LHC grant No.284404. Used NERSC resources by US DOE contract No.DE-AC02-05CH11231.
The LHC high luminosity project envisages the use of the crabbing technique for increasing and levelling the LHC luminosity. Double-Quarter Wave (DQW) resonators are compact cavities especially designed to meet the technical and performance requirements for LHC beam crabbing. A couple of DQW crab cavities are under preparation and will be tested with beam in the Super Proton Synchrotron (SPS) of CERN by 2017. This paper describes the design and prototyping of DQW crab cavities for the SPS test.

Slides MOBD2 [6.909 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOBD2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPWI021

The LCLS-II LLRF System

1195

C. Hovater, R. Bachimanchi
JLab, Newport News, Virginia, USA
S. Babel, B. Hong, D. Van Winkle
SLAC, Menlo Park, California, USA
B.E. Chase, E. Cullerton, P. Varghese
Fermilab, Batavia, Illinois, USA
L.R. Doolittle, G. Huang, A. Ratti, C. Serrano
LBNL, Berkeley, California, USA

Funding: This work was supported by the LCLS-II Project and the U.S. Department of Energy, Contract DE-AC02-76SF00515.
The SLAC National Accelerator Laboratory is planning an upgrade (LCLS-II) to the Linear Coherent Light Source with a 4 GeV CW superconducting (SCRF) linac. The SCRF linac consists of 35 ILC style cryomodules (eight cavities each) for a total of 280 cavities. Expected cavity gradients are 16 MV/m with a loaded QL of ~ 4x10⁷. The RF system will have 3.8 kW solid state amplifiers driving single cavities. To ensure optimum field stability a single source single cavity control system has been chosen. It consists of a precision four channel cavity receiver and RF stations (Forward, Reflected and Drive signals). In order to regulate the resonant frequency variations of the cavities due to He pressure, the tuning of each cavity is controlled by a Piezo actuator and a slow stepper motor. In addition the system (LLRF-amplifier-cavity) is being modeled and cavity microphonic testing has started. This paper describes the LLRF system under consideration, including recent modeling and cavity tests.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPWI021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)