IPAC2015 - List of Authors (Pai, C.)

Paper	Title	Page
WEPWI054	Design and Test of the RHIC CMD10 Abort Kicker	3612
	H. Hahn, M. Blaskiewicz, K.A. Drees, W. Fischer, W. Meng, J.-L. Mi, C. Montag, C. Pai, J. Sandberg, N. Tsoupas, J.E. Tuozzolo, W. Zhang BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Planned and unplanned thyratron pre-fire triggered beam dumps have been observed in the yellow ring that were associated with quenches of the superconducting main ring magnets as the proton intensities increased in the FY10¹³ run. The increasing vacuum level indicated beam induced kicker ferrite heating causing lower magnetic kick field at a nominal pulse current. In anticipation of higher current and shorter bunches in FY2015 an accelerator improvement program was initiated to reduce the longitudinal coupling impedance with changes to the eddy-current strip geometry using Opera simulations and to change the CMD5005 to CMD10 ferrite. Results of the standard impedance measurements and of pulse current in heating tests to 170 °C are reported. All 10 dump kickers are being modified and are encapsulated with a cooling system for installation in the rings.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWI054
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Test of the RHIC CMD10 Abort Kicker

3612

H. Hahn, M. Blaskiewicz, K.A. Drees, W. Fischer, W. Meng, J.-L. Mi, C. Montag, C. Pai, J. Sandberg, N. Tsoupas, J.E. Tuozzolo, W. Zhang
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Planned and unplanned thyratron pre-fire triggered beam dumps have been observed in the yellow ring that were associated with quenches of the superconducting main ring magnets as the proton intensities increased in the FY10¹³ run. The increasing vacuum level indicated beam induced kicker ferrite heating causing lower magnetic kick field at a nominal pulse current. In anticipation of higher current and shorter bunches in FY2015 an accelerator improvement program was initiated to reduce the longitudinal coupling impedance with changes to the eddy-current strip geometry using Opera simulations and to change the CMD5005 to CMD10 ferrite. Results of the standard impedance measurements and of pulse current in heating tests to 170 °C are reported. All 10 dump kickers are being modified and are encapsulated with a cooling system for installation in the rings.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWI054

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)