IPAC2015 - List of Authors (Lajoie, A.)

Paper	Title	Page
THPF141	Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL	4054
	A.N. Pham, P. Glennon, A. Lajoie, D. Lawton, D. Leitner, G. Machicoane, J. Ottarson, M. Portillo, J. Wenstrom NSCL, East Lansing, Michigan, USA
	Funding: Work supported by Michigan State University and the National Science Foundation Grant PHYS-1102511. The design of a compact all-permanent magnet electron cyclotron resonance (ECR) ion source injector for the ReAccelerator Facility (ReA) at the Michigan State University (MSU) National Superconducting Cyclotron Laboratory (NSCL) is currently being carried out. The ECR ion source injector will augment the electron beam ion trap (EBIT) charge breeder as an off-line stable ion beam injector for the ReA linac. The objective of the ECR ion source injector will be to provide CW beams of heavy ions from hydrogen to masses up to 136Xe within the ReA charge-to-mass ratio (Q/A) operational range from 0.2 to 0.5. The ECR ion source will be mounted on a high-voltage platform that can be adjusted to provide the required 12 keV/u injection energy into a room temperature radio-frequency quadrupole (RFQ) for further acceleration. The beam line consists of a 30 kV tetrode extraction system, mass analyzing section, and optical matching section for injection into the existing ReA Low Energy Beam Transport (LEBT) line. The design of the ECR ion source and the associated beam line are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF141
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL

4054

A.N. Pham, P. Glennon, A. Lajoie, D. Lawton, D. Leitner, G. Machicoane, J. Ottarson, M. Portillo, J. Wenstrom
NSCL, East Lansing, Michigan, USA

Funding: Work supported by Michigan State University and the National Science Foundation Grant PHYS-1102511.
The design of a compact all-permanent magnet electron cyclotron resonance (ECR) ion source injector for the ReAccelerator Facility (ReA) at the Michigan State University (MSU) National Superconducting Cyclotron Laboratory (NSCL) is currently being carried out. The ECR ion source injector will augment the electron beam ion trap (EBIT) charge breeder as an off-line stable ion beam injector for the ReA linac. The objective of the ECR ion source injector will be to provide CW beams of heavy ions from hydrogen to masses up to 136Xe within the ReA charge-to-mass ratio (Q/A) operational range from 0.2 to 0.5. The ECR ion source will be mounted on a high-voltage platform that can be adjusted to provide the required 12 keV/u injection energy into a room temperature radio-frequency quadrupole (RFQ) for further acceleration. The beam line consists of a 30 kV tetrode extraction system, mass analyzing section, and optical matching section for injection into the existing ReA Low Energy Beam Transport (LEBT) line. The design of the ECR ion source and the associated beam line are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF141

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)