IPAC2015 - List of Authors (Hayano, H.)

Paper	Title	Page
MOBB2	Fabrication of TESLA-shape 9-cell Cavities at KEK for Studies on Mass-Production in Collaboration with Industries	31
	T. Saeki, H. Hayano KEK, Ibaraki, Japan
	The construction of the new Center-of-Innovation (COI) buiding started at KEK from 2014 for the studies of mass-production of Superconducting-RF accelerators in collaboration with industries. The COI buiding is sitting next to the existing KEK-STF building and will include various Superconducting-RF facilities like clean-room for cavity-string assembly, cryomodule-assembly facility, cryogenic system, vertical-test facility, cryomodule-test facility, input-coupler processing facility, cavity Electro-Polishing (EP) facility, and control-room/office-rooms in the dimension of 80 m x 30 m. The purpose of this new SRF facilities is to establish a close collaboration between SRF researchers and industries in order to prepare for the upcoming large-scale future SRF project, like ILC. This article reports the fabricaion of four TESLA-shape 9-cell cavities for the commisioning of these new facilities. Details of the fabrication of these four cavities will be presented.
	Slides MOBB2 [3.983 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOBB2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA046	Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity	2869
	K. Nohara, N. Kawabata, K. Miyajima, M. Shinohara SPS, Funabashi-shi, Japan H. Hayano, S. Kato, T. Saeki, A. Yamamoto, M. Yamanaka KEK, Ibaraki, Japan
	Pure Nb as the material of SRF cavity bears hard workability in general. This is why both the inner and outer conductors of HOM coupler for 9-cell cavity have been conventionally produced by full machining, backward extrusion accompanied with annealing and so on. However, in the mass production of 9-cell cavities in ILC, further cost reduction is required. We produced both the inner and outer conductors of HOM coupler for 9-cell cavity in the advanced press forming methods aiming at cost reduction. Press forming of a pure Nb sheet for the outer conductor of HOM coupler was performed with fewer processes free from intermediate annealing and primary machining. For the inner conductor of HOM coupler, water jet cutting and press cold-forging of a plate was performed. The above advanced press forming methods showed favored results, leading to a possibility of simple mass-production of components and cost reduction. The vertical test on a 9-cell cavity with the press formed HOM couplers achieved 36 MV/m that is beyond ILC qualification. The R＆D works are ongoing for further improvement.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA046
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Fabrication of TESLA-shape 9-cell Cavities at KEK for Studies on Mass-Production in Collaboration with Industries

31

T. Saeki, H. Hayano
KEK, Ibaraki, Japan

The construction of the new Center-of-Innovation (COI) buiding started at KEK from 2014 for the studies of mass-production of Superconducting-RF accelerators in collaboration with industries. The COI buiding is sitting next to the existing KEK-STF building and will include various Superconducting-RF facilities like clean-room for cavity-string assembly, cryomodule-assembly facility, cryogenic system, vertical-test facility, cryomodule-test facility, input-coupler processing facility, cavity Electro-Polishing (EP) facility, and control-room/office-rooms in the dimension of 80 m x 30 m. The purpose of this new SRF facilities is to establish a close collaboration between SRF researchers and industries in order to prepare for the upcoming large-scale future SRF project, like ILC. This article reports the fabricaion of four TESLA-shape 9-cell cavities for the commisioning of these new facilities. Details of the fabrication of these four cavities will be presented.

Slides MOBB2 [3.983 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOBB2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA046

Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity

2869

K. Nohara, N. Kawabata, K. Miyajima, M. Shinohara
SPS, Funabashi-shi, Japan
H. Hayano, S. Kato, T. Saeki, A. Yamamoto, M. Yamanaka
KEK, Ibaraki, Japan

Pure Nb as the material of SRF cavity bears hard workability in general. This is why both the inner and outer conductors of HOM coupler for 9-cell cavity have been conventionally produced by full machining, backward extrusion accompanied with annealing and so on. However, in the mass production of 9-cell cavities in ILC, further cost reduction is required. We produced both the inner and outer conductors of HOM coupler for 9-cell cavity in the advanced press forming methods aiming at cost reduction. Press forming of a pure Nb sheet for the outer conductor of HOM coupler was performed with fewer processes free from intermediate annealing and primary machining. For the inner conductor of HOM coupler, water jet cutting and press cold-forging of a plate was performed. The above advanced press forming methods showed favored results, leading to a possibility of simple mass-production of components and cost reduction. The vertical test on a 9-cell cavity with the press formed HOM couplers achieved 36 MV/m that is beyond ILC qualification. The R＆D works are ongoing for further improvement.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA046

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)