IPAC2015 - List of Authors (Findlay, A.)

Paper	Title	Page
WEPHA015	Beam Tests Using a Wide Band RF System Prototype in the CERN PS Booster	3134
	M.M. Paoluzzi, M.E. Angoletta, A. Findlay, M. Haase, M. Jaussi, A.J. Jones, J.C. Molendijk, J. Sanchez-Quesada CERN, Geneva, Switzerland
	In the framework of the LHC Injectors Upgrade project (LIU) and in view of a complete replacement of the existing CERN PS Booster (PSB) RF systems, a small scale, wide band prototype cavity was installed in 2012 in the machine. Following the encouraging tests done using this limited set up, an almost full scale, RF system prototype has been built and installed in the PSB during the Long Shutdown 1 (LS1). This modular, Finemet® loaded system covers the band 0.5 / 4 MHz corresponding to the h=1 and h=2 frequency ranges. It uses solid-state power stages and includes fast RF feedback for beam loading compensation. New dedicated digital low level electronics have been implemented for all loops required for beam acceleration and interfaces with the general PSB control system. It allows using the new equipment at the fundamental and/or second harmonic of the beam revolution frequency as well as operating it in parallel with the existing RF systems. This paper describes the low level and power sections of the project and reports about the achieved results and experience built up so far.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA015
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF090	Status and Plans for the Upgrade of the CERN PS Booster	3905
	K. Hanke, D. Aguglia, M.E. Angoletta, W. Bartmann, C. Bedel, E. Benedetto, S. Bertolasi, C. Bertone, J. Betz, T.W. Birtwistle, A. Blas, J. Borburgh, C. Bracco, A.C. Butterworth, E. Carlier, S. Chemli, P. Dahlen, A. Dallocchio, G.P. Di Giovanni, T. Dobers, A. Findlay, R. Froeschl, A. Funken, S. Gabourin, J.L. Grenard, D. Grenier, J. Hansen, D. Hay, J.-M. Lacroix, P. Le Roux, L.A. Lopez Hernandez, C. Martin, A. Masi, B. Mikulec, Y. Muttoni, A. Newborough, D. Nisbet, M.R. Obrecht, M.M. Paoluzzi, S. Pittet, B. Puccio, J. Tan, J. Vollaire, W.J.M. Weterings CERN, Geneva, Switzerland
	CERN’s Proton Synchrotron Booster (PSB) is undergoing a major upgrade program in the frame of the LHC Injectors Upgrade (LIU) project. During the first long LHC shutdown (LS1) some parts of the upgrade have already been implemented, and the machine has been successfully re-commissioned. More work is planned for the upcoming end-of-year technical stops, notably in 2016/17, while most of the upgrade is planned to take place during the second long LHC shutdown (LS2). We report on the upgrade items already completed and commissioned, the first Run 2 beam performance and give a status of the ongoing design and integration work.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF090
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Tests Using a Wide Band RF System Prototype in the CERN PS Booster

3134

M.M. Paoluzzi, M.E. Angoletta, A. Findlay, M. Haase, M. Jaussi, A.J. Jones, J.C. Molendijk, J. Sanchez-Quesada
CERN, Geneva, Switzerland

In the framework of the LHC Injectors Upgrade project (LIU) and in view of a complete replacement of the existing CERN PS Booster (PSB) RF systems, a small scale, wide band prototype cavity was installed in 2012 in the machine. Following the encouraging tests done using this limited set up, an almost full scale, RF system prototype has been built and installed in the PSB during the Long Shutdown 1 (LS1). This modular, Finemet® loaded system covers the band 0.5 / 4 MHz corresponding to the h=1 and h=2 frequency ranges. It uses solid-state power stages and includes fast RF feedback for beam loading compensation. New dedicated digital low level electronics have been implemented for all loops required for beam acceleration and interfaces with the general PSB control system. It allows using the new equipment at the fundamental and/or second harmonic of the beam revolution frequency as well as operating it in parallel with the existing RF systems. This paper describes the low level and power sections of the project and reports about the achieved results and experience built up so far.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPHA015

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF090

Status and Plans for the Upgrade of the CERN PS Booster

3905

K. Hanke, D. Aguglia, M.E. Angoletta, W. Bartmann, C. Bedel, E. Benedetto, S. Bertolasi, C. Bertone, J. Betz, T.W. Birtwistle, A. Blas, J. Borburgh, C. Bracco, A.C. Butterworth, E. Carlier, S. Chemli, P. Dahlen, A. Dallocchio, G.P. Di Giovanni, T. Dobers, A. Findlay, R. Froeschl, A. Funken, S. Gabourin, J.L. Grenard, D. Grenier, J. Hansen, D. Hay, J.-M. Lacroix, P. Le Roux, L.A. Lopez Hernandez, C. Martin, A. Masi, B. Mikulec, Y. Muttoni, A. Newborough, D. Nisbet, M.R. Obrecht, M.M. Paoluzzi, S. Pittet, B. Puccio, J. Tan, J. Vollaire, W.J.M. Weterings
CERN, Geneva, Switzerland

CERN’s Proton Synchrotron Booster (PSB) is undergoing a major upgrade program in the frame of the LHC Injectors Upgrade (LIU) project. During the first long LHC shutdown (LS1) some parts of the upgrade have already been implemented, and the machine has been successfully re-commissioned. More work is planned for the upcoming end-of-year technical stops, notably in 2016/17, while most of the upgrade is planned to take place during the second long LHC shutdown (LS2). We report on the upgrade items already completed and commissioned, the first Run 2 beam performance and give a status of the ongoing design and integration work.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF090

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)