IPAC2015 - List of Authors (Fedosseev, V.)

Paper	Title	Page
MOAC1	Awake: the Proof-of-principle R&D Experiment at CERN	34
	P. Muggli MPI, Muenchen, Germany M. Bernardini, T. Bohl, C. Bracco, A.C. Butterworth, S. Cipiccia, H. Damerau, S. Döbert, V. Fedosseev, E. Feldbaumer, E. Gschwendtner, W. Höfle, A. Pardons, A.V. Petrenko, J.S. Schmidt, M. Turner, H. Vincke CERN, Geneva, Switzerland
	The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) is a proof-of-principle R&D experiment at CERN. It is the world’s first proton driven plasma wakefield acceleration experiment, using a high-energy proton bunch to drive a plasma wakefield for electron beam acceleration. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV proton beam bunches from the SPS, which will be sent to a plasma source. An electron beam will be injected into the plasma cell to probe the accelerating wakefield. Challenging modifications in the area and new installations are required for AWAKE. First proton beam to the experiment is expected late 2016. The accelerating electron physics will start late 2017. This paper gives an overview of the project from a physics and engineering point of view, it describes the main activities, the milestones, the organizational set-up for the project management and coordination.
	Slides MOAC1 [21.632 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOAC1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE039	Recent Results on the Performance of Cs3Sb Photocathodes in the PHIN RF-Gun	1699
	C. Heßler, E. Chevallay, S. Döbert, V. Fedosseev, I. Martini, M. Martyanov CERN, Geneva, Switzerland
	For the CLIC drive beam a photoinjector option is under study at CERN as an alternative to the thermionic electron gun in the CLIC baseline design. The CLIC drive beam requires a high bunch charge of 8.4 nC and 0.14 ms long trains with 2 ns bunch spacing, which is challenging for a photoinjector. In particular the required long and high intensity laser pulses cause a degradation of the beam quality during the frequency conversion process, which generates the ultra-violet laser beam needed for standard Cs2Te photocathodes. To overcome this issue Cs3Sb cathodes sensitive to green light have been studied at the high-charge PHIN photoinjector since a few years. In this paper recent measurements of fundamental properties of Cs3Sb photocathodes such as quantum efficiency, cathode lifetime and dark current from summer 2014 will be presented, and compared with previous measurements and with the performance of Cs2Te photocathodes.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE040	Surface Characterization at CERN of Photocathodes for Photoinjector Applications	1703
	I. Martini, E. Chevallay, V. Fedosseev, C. Heßler, H. Neupert, V. Nistor, M. Taborelli CERN, Geneva, Switzerland
	R&D on photocathodes takes place at CERN within the CLIC (Compact Linear Collider) project. Photocathodes are produced as thin films on Oxygen Free copper substrate using a co-deposition technique, and characterized in a dedicated laboratory with a DC photo-electron gun. A new UHV carrier vessel compatible with CERN’s XPS (X-ray Photoelectron Spectroscopy) analysis equipment has been commissioned and is used to transport photocathodes from the production laboratory to perform a systematic study of different compounds used as photoemissive materials. In this paper photocathodes used in a RF photoinjector will be characterized and the correlation of their surface properties with their performance will be investigated.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Awake: the Proof-of-principle R&D Experiment at CERN

34

P. Muggli
MPI, Muenchen, Germany
M. Bernardini, T. Bohl, C. Bracco, A.C. Butterworth, S. Cipiccia, H. Damerau, S. Döbert, V. Fedosseev, E. Feldbaumer, E. Gschwendtner, W. Höfle, A. Pardons, A.V. Petrenko, J.S. Schmidt, M. Turner, H. Vincke
CERN, Geneva, Switzerland

The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) is a proof-of-principle R&D experiment at CERN. It is the world’s first proton driven plasma wakefield acceleration experiment, using a high-energy proton bunch to drive a plasma wakefield for electron beam acceleration. The AWAKE experiment will be installed in the former CNGS facility and uses the 400 GeV proton beam bunches from the SPS, which will be sent to a plasma source. An electron beam will be injected into the plasma cell to probe the accelerating wakefield. Challenging modifications in the area and new installations are required for AWAKE. First proton beam to the experiment is expected late 2016. The accelerating electron physics will start late 2017. This paper gives an overview of the project from a physics and engineering point of view, it describes the main activities, the milestones, the organizational set-up for the project management and coordination.

Slides MOAC1 [21.632 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOAC1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE039

Recent Results on the Performance of Cs3Sb Photocathodes in the PHIN RF-Gun

1699

C. Heßler, E. Chevallay, S. Döbert, V. Fedosseev, I. Martini, M. Martyanov
CERN, Geneva, Switzerland

For the CLIC drive beam a photoinjector option is under study at CERN as an alternative to the thermionic electron gun in the CLIC baseline design. The CLIC drive beam requires a high bunch charge of 8.4 nC and 0.14 ms long trains with 2 ns bunch spacing, which is challenging for a photoinjector. In particular the required long and high intensity laser pulses cause a degradation of the beam quality during the frequency conversion process, which generates the ultra-violet laser beam needed for standard Cs2Te photocathodes. To overcome this issue Cs3Sb cathodes sensitive to green light have been studied at the high-charge PHIN photoinjector since a few years. In this paper recent measurements of fundamental properties of Cs3Sb photocathodes such as quantum efficiency, cathode lifetime and dark current from summer 2014 will be presented, and compared with previous measurements and with the performance of Cs2Te photocathodes.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE040

Surface Characterization at CERN of Photocathodes for Photoinjector Applications

1703

I. Martini, E. Chevallay, V. Fedosseev, C. Heßler, H. Neupert, V. Nistor, M. Taborelli
CERN, Geneva, Switzerland

R&D on photocathodes takes place at CERN within the CLIC (Compact Linear Collider) project. Photocathodes are produced as thin films on Oxygen Free copper substrate using a co-deposition technique, and characterized in a dedicated laboratory with a DC photo-electron gun. A new UHV carrier vessel compatible with CERN’s XPS (X-ray Photoelectron Spectroscopy) analysis equipment has been commissioned and is used to transport photocathodes from the production laboratory to perform a systematic study of different compounds used as photoemissive materials. In this paper photocathodes used in a RF photoinjector will be characterized and the correlation of their surface properties with their performance will be investigated.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)