The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Jagdfeld, H. AU - Bongers, N. AU - Chaumet, P. AU - Esser, F.M. AU - Jordan, F. AU - Klehr, F. AU - Langenberg, G. AU - Pabst, U. AU - Semke, L. ED - Henderson, Stuart ED - Akers, Evelyn ED - Satogata, Todd ED - Schaa, Volker R.W. TI - Bakeout Concept for the HESR at FAIR J2 - Proc. of IPAC2015, Richmond, VA, USA, May 3-8, 2015 C1 - Richmond, VA, USA T2 - International Particle Accelerator Conference T3 - 6 LA - english AB - Forschungszentrum Jülich has taken the leadership of a consortium being responsible for the design of the High-Energy Storage Ring (HESR) going to be part of the FAIR project at GSI. The HESR is designed for antiprotons but can be used for heavy ion experiments as well. Therefore the vacuum is expected to be 10⁻¹¹ mbar or better. To achieve this also in the curved sections where 44 bent dipole magnets with a length of around 4.5 m will be installed, NEG coated dipole chambers will be used to reach the needed pumping speed and capacity. For activation of the NEG-material a bakeout system must be installed. The bakeout concept including the layout of the control system and the systematization of the heater packages for all components of the vacuum system are presented. Also the special design of the heater jackets inside the dipole will be shown where the geometrical parameters are very critical and space is very limited. The results of the simulation of temperature distribution in the dipole iron are compared to temperature measurements carried out at a testbench with different layouts of the heater jackets. The final design of the dipole heater jackets will be illustrated. PB - JACoW CP - Geneva, Switzerland SP - 2832 EP - 2834 KW - dipole KW - vacuum KW - ion KW - heavy-ion KW - controls DA - 2015/06 PY - 2015 SN - 978-3-95450-168-7 DO - 10.18429/JACoW-IPAC2015-WEPMA034 UR - http://jacow.org/ipac2015/papers/wepma034.pdf ER -