The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Gambaryan, V.V. AU - Starostenko, A.A. ED - Henderson, Stuart ED - Akers, Evelyn ED - Satogata, Todd ED - Schaa, Volker R.W. TI - Fast Kicker J2 - Proc. of IPAC2015, Richmond, VA, USA, May 3-8, 2015 C1 - Richmond, VA, USA T2 - International Particle Accelerator Conference T3 - 6 LA - english AB - Pulsed deflecting magnet project was worked out in BINP. The kicker design task is: impulsive force value is 1 mT*m, pulse edge is 5 ns, and impulse duration is about 200 ns. The unconventional approach to kicker design was offered. The possibility for set of wires using instead of plates using is considered. This approach allows us to reduce the effective plate surface. In this case we can decrease effects related to induced charges and currents. In the result of modelling optimal construction was developed. It includes 6 wires. The magnet aperture is about 5 cm. Calculated field rise time (about 1.5 ns) satisfies the conditions. Induced current effect reducing idea was confirmed. For configuration with 3 wires pair (with cross section of 2 mm) induced current in one wire is about 10% and in the wall is about 40%. However for design with plates current is about 40% and 20% respectively. Obtained magnet construction allows controlling of high field homogeneity by changing currents magnitudes in wires. In general we demonstrated the method of field optimization. Optimal kicker design was obtained. Wires using idea was substantiated. PB - JACoW CP - Geneva, Switzerland SP - 1001 EP - 1003 KW - kicker KW - impedance KW - simulation KW - vacuum KW - magnet-design DA - 2015/06 PY - 2015 SN - 978-3-95450-168-7 DO - 10.18429/JACoW-IPAC2015-MOPTY033 UR - http://jacow.org/ipac2015/papers/mopty033.pdf ER -