IPAC2014 - Classification: 07 Accelerator Technology Main Systems / T21 Infrastructures

Paper	Title	Page
THPRO077	The New FREIA Laboratory for Accelerator Development	3059
	R.J.M.Y. Ruber, A.K. Bhattacharyya, T.J.C. Ekelöf, K. Fransson, K.J. Gajewski, V.A. Goryashko, L. Hermansson, M. Jacewicz, T. Lofnes, M. Olvegård, R. Santiago Kern, R. Wedberg, R.A. Yogi, V.G. Ziemann Uppsala University, Uppsala, Sweden D.S. Dancila, A. Rydberg Uppsala University, Department of Engineering Sciences, Uppsala, Sweden
	The FREIA laboratory is a Facility for REsearch Instrumentation and Accelerator Development at Uppsala University, Sweden constructed recently to develop and test accelerator components. Initially it will develop the RF system for the spoke cavities of the ESS linac and test prototype spoke cavities at nominal RF power. For this purpose we installed a helium liquefaction plant, a versatile horizontal test cryostat and two 352 MHz RF power stations, one based on two tetrodes and the other on solid state technology. Beyond these developments FREIA will house a neutron generator and plans for a THz FEL are under discussion. FREIA is embedded in the Ångström physics, chemistry and engineering campus at Uppsala in close proximity to mechanical workshops, clean room with electron microscopes, tandem accelerator and the biomedical center.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO077
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME197	Power Saving Status in the NSRRC	3744
	J.-C. Chang, Y.C. Chang, Y.F. Chiu, Y.-C. Chung, C.W. Hsu, Y.-C. Lin, C.Y. Liu, Y.-H. Liu, Z.-D. Tsai, T.-S. Ueng NSRRC, Hsinchu, Taiwan
	National Synchrotron Radiation Research Center (NSRRC), Taiwan has completed the construction of the civil and utility system engineering of the Taiwan Photon Source (TPS) in 2013 and 2014, respectively. The contract power capacities of the Taiwan Light Source (TLS) and the TPS with the Taiwan Power Company (TPC) are 5.5MW and 3MW currently, respectively. The ultimate power consumption of the TPS is estimated about 12.5MW. To cope with increasing power requirement in the near future, we have been conducting several power saving schemes for years. They include power consumption control, optimization of chillers operation, air conditioning system improvement, power factor improvement, application of heat pump, and promotion for power saving.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME197
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME198	TPS Storage and Booster Ring Cable Tray Installation Status and CIA Design Arrangement	3748
	Y.-H. Liu, J.-R. Chen NSRRC, Hsinchu, Taiwan
	The TPS infrastructure and the whole subsystems for the accelerator are now approach to finish. The cable trays for booster and storage ring in tunnel are almost finished. The 3 layers cable trays for booster ring are for dipole, quaturpole power supply cable and IC/VA signal cable respectively. The designed for limited space for cooling water below the cable tray and the magnet girder above. The storage ring cable tray also designed for different subsystems, and separate the power and signal layer. The power racks for all subsystem are located in control and instrument area (CIA). The magnet and ID power supply are placed in the 1st floor and the IC, VA, MP and FE control racks are placed in the 2nd floor. The separation between the power and signal cable tray are noticed for the whole path inside tunnel and CIA. Now the subsystem is under installation, although it is hard to cabling but it would not be the problem.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME198
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME200	Status of the Utility System Construction for the 3 GeV TPS Storage Ring	3751
	J.-C. Chang, W.S. Chan, C.S. Chen, J.-R. Chen, Y.-C. Chung, C.W. Hsu, K.C. Kuo, Y.-C. Lin, C.Y. Liu, Y.-H. Liu, Z.-D. Tsai, T.-S. Ueng NSRRC, Hsinchu, Taiwan
	The construction of the utility system for the 3.0 GeV Taiwan Photon Source (TPS) was started in the end of 2009. The utility building for the TPS ring had been completed in the end of 2013. The building use license had been approved in Sep. 2013. The whole construction engineering has been completed. The acceptance test is scheduled on July 2014. Total budget of this construction is about four million dollars. This utility system presented in this paper includes the cooling water, air conditioning, electrical power, and compressed air systems.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME200
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME201	Survey Network of NESTOR Facility	3754
SUSPSNE105	use link to see paper's listing under its alternate paper code
	O. Bezditko, V.E. Ivashchenko, I.M. Karnaukhov, A. Mytsykov, O.V. Ryezayev, A.Y. Zelinsky NSC/KIPT, Kharkov, Ukraine
	For successful operation of X-ray source NESTOR it is necessary that all the focusing elements should be installed in design position according to the designed lattice, which should provide a low emittance value and small beam size at the interaction point . Accuracies of NESTOR electromagnetic elements installation are 100 mkm in the transverse coordinate, 200 mkm in the longitudinal coordinate and 200 mrad for all three rotation freedom. To achieve these objectives coordinate net, which allows us to align the elements, was designed and developed in the hall of the NESTOR storage ring. The whole process is controlled by means of optical instruments and theodolite 3T2KP with angular accuracy of 2" and laser meter system LMS - 100, which measure the distance with micron accuracy. The final errors budget consists of the accuracy of the measuring instruments, the quality of elements manufacture and assembling. A well-planned methodology allows to realize the design parameters of the X-ray generator "NESTOR " and was proved by experiments of the facility.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME201
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The New FREIA Laboratory for Accelerator Development

3059

R.J.M.Y. Ruber, A.K. Bhattacharyya, T.J.C. Ekelöf, K. Fransson, K.J. Gajewski, V.A. Goryashko, L. Hermansson, M. Jacewicz, T. Lofnes, M. Olvegård, R. Santiago Kern, R. Wedberg, R.A. Yogi, V.G. Ziemann
Uppsala University, Uppsala, Sweden
D.S. Dancila, A. Rydberg
Uppsala University, Department of Engineering Sciences, Uppsala, Sweden

The FREIA laboratory is a Facility for REsearch Instrumentation and Accelerator Development at Uppsala University, Sweden constructed recently to develop and test accelerator components. Initially it will develop the RF system for the spoke cavities of the ESS linac and test prototype spoke cavities at nominal RF power. For this purpose we installed a helium liquefaction plant, a versatile horizontal test cryostat and two 352 MHz RF power stations, one based on two tetrodes and the other on solid state technology. Beyond these developments FREIA will house a neutron generator and plans for a THz FEL are under discussion. FREIA is embedded in the Ångström physics, chemistry and engineering campus at Uppsala in close proximity to mechanical workshops, clean room with electron microscopes, tandem accelerator and the biomedical center.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO077

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME197

Power Saving Status in the NSRRC

3744

J.-C. Chang, Y.C. Chang, Y.F. Chiu, Y.-C. Chung, C.W. Hsu, Y.-C. Lin, C.Y. Liu, Y.-H. Liu, Z.-D. Tsai, T.-S. Ueng
NSRRC, Hsinchu, Taiwan

National Synchrotron Radiation Research Center (NSRRC), Taiwan has completed the construction of the civil and utility system engineering of the Taiwan Photon Source (TPS) in 2013 and 2014, respectively. The contract power capacities of the Taiwan Light Source (TLS) and the TPS with the Taiwan Power Company (TPC) are 5.5MW and 3MW currently, respectively. The ultimate power consumption of the TPS is estimated about 12.5MW. To cope with increasing power requirement in the near future, we have been conducting several power saving schemes for years. They include power consumption control, optimization of chillers operation, air conditioning system improvement, power factor improvement, application of heat pump, and promotion for power saving.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME197

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME198

TPS Storage and Booster Ring Cable Tray Installation Status and CIA Design Arrangement

3748

Y.-H. Liu, J.-R. Chen
NSRRC, Hsinchu, Taiwan

The TPS infrastructure and the whole subsystems for the accelerator are now approach to finish. The cable trays for booster and storage ring in tunnel are almost finished. The 3 layers cable trays for booster ring are for dipole, quaturpole power supply cable and IC/VA signal cable respectively. The designed for limited space for cooling water below the cable tray and the magnet girder above. The storage ring cable tray also designed for different subsystems, and separate the power and signal layer. The power racks for all subsystem are located in control and instrument area (CIA). The magnet and ID power supply are placed in the 1st floor and the IC, VA, MP and FE control racks are placed in the 2nd floor. The separation between the power and signal cable tray are noticed for the whole path inside tunnel and CIA. Now the subsystem is under installation, although it is hard to cabling but it would not be the problem.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME198

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME200

Status of the Utility System Construction for the 3 GeV TPS Storage Ring

3751

J.-C. Chang, W.S. Chan, C.S. Chen, J.-R. Chen, Y.-C. Chung, C.W. Hsu, K.C. Kuo, Y.-C. Lin, C.Y. Liu, Y.-H. Liu, Z.-D. Tsai, T.-S. Ueng
NSRRC, Hsinchu, Taiwan

The construction of the utility system for the 3.0 GeV Taiwan Photon Source (TPS) was started in the end of 2009. The utility building for the TPS ring had been completed in the end of 2013. The building use license had been approved in Sep. 2013. The whole construction engineering has been completed. The acceptance test is scheduled on July 2014. Total budget of this construction is about four million dollars. This utility system presented in this paper includes the cooling water, air conditioning, electrical power, and compressed air systems.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME200

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME201

Survey Network of NESTOR Facility

3754

SUSPSNE105

use link to see paper's listing under its alternate paper code

O. Bezditko, V.E. Ivashchenko, I.M. Karnaukhov, A. Mytsykov, O.V. Ryezayev, A.Y. Zelinsky
NSC/KIPT, Kharkov, Ukraine

For successful operation of X-ray source NESTOR it is necessary that all the focusing elements should be installed in design position according to the designed lattice, which should provide a low emittance value and small beam size at the interaction point . Accuracies of NESTOR electromagnetic elements installation are 100 mkm in the transverse coordinate, 200 mkm in the longitudinal coordinate and 200 mrad for all three rotation freedom. To achieve these objectives coordinate net, which allows us to align the elements, was designed and developed in the hall of the NESTOR storage ring. The whole process is controlled by means of optical instruments and theodolite 3T2KP with angular accuracy of 2" and laser meter system LMS - 100, which measure the distance with micron accuracy. The final errors budget consists of the accuracy of the measuring instruments, the quality of elements manufacture and assembling. A well-planned methodology allows to realize the design parameters of the X-ray generator "NESTOR " and was proved by experiments of the facility.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME201

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)