IPAC2014 - List of Authors (Takano, S.)

Paper	Title	Page
MOPRI010	Laser Ablation Ion Source for the KEK Digital Accelerator	598
	N. Munemoto Department of Energy Sciences, Tokyo Institute of Technology, Yokohama, Japan Y. Fuwa, S. Ikeda, M. Kumaki RIKEN, Saitama, Japan Y. Fuwa Kyoto ICR, Uji, Kyoto, Japan S. Ikeda, K. Takayama TIT, Yokohama, Japan M. Kumaki RISE, Tokyo, Japan M. Okamura BNL, Upton, Long Island, New York, USA S. Takano, K. Takayama KEK, Ibaraki, Japan K. Takayama Sokendai, Ibaraki, Japan
	KEK Digital Accelerator (DA) is a small scale induction synchrotron and operated at 10Hz and recently has succeeded to accelerate gaseous ions. There is a strong demand of fully striped carbon ions because the DA is regarded as the second generation of cancer therapy driver, which does not require an injector and electron stripper. We need a novel carbon ion source providing C⁶⁺ beams, which are directly injected into the DA and accelerated up to required energy. For this purpose, a laser ablation ion source(LAIS) is promising. To obtain high yield C⁶⁺ ions from ablation plasma, the laser irradiation condition has been evaluated and relationship between beam properties of charge spectrum, intensity, and temperature, and carbon target materials were examined. Two laser systems, long pulse (6 ns) and short pulse (170 ps), were employed to irradiate a graphite and amorphous carbon target. The current densities and profile of the generated plasmas in time were measured and charge state distributions were analyzed. In addition we will report a full design integrating this LAIS, the extraction system, the longitudinal chopper system, and the low energy beam transport line. T.Yoshimoto et al., presented in this conference ** N.Munemoto et al., Proceedings of ICIS2013, published in Rev. Sci. Inst.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI010
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAB02	Wide-band Induction Acceleration in the KEK Digital Accelerator	1893
SUSPSNE021	use link to see paper's listing under its alternate paper code
	T. Yoshimoto, X. Liu, K. Takayama TIT, Yokohama, Japan T. Adachi, K. Takayama Sokendai, Ibaraki, Japan T. Adachi, T. Arai, E. Kadokura, T. Kawakubo, X. Liu, K. Okamura, S. Takano, K. Takayama, T. Yoshimoto KEK, Ibaraki, Japan H. Asao, Y. Okada NETS, Fuchu-shi, Japan M. Hirose, H. Kobayashi Tokyo City University, Tokyo, Japan
	Induction synchrotron can accelerate any ion species directly to higher energy without a large pre-accelerator, due to its intrinsic nature that there is no frequency band-width limitation below 1 MHz. KEK digital accelerator (DA) is a small scale prototype of fast cycling induction synchrotron. Recently it has been confirmed that heavy ion beams of mass to charge ratio A/Q = 4 are stably accelerated from 200 keV to a few tens of MeV in this accelerator ring, where the revolution frequency changes from82 kHz to 1 MHz. Acceleration and beam confinement are separately realized by pulse voltages generated in induction cells (1 to 1 pulse transformers) driven by the switching power supply (SPS). Everything is simply maneuvered by controlling of gate signals of solid-state switching elements employed in the SPS. For this purpose, the fully programmed acceleration control system based on the FPGA has been developed. In this paper, the wide-band induction acceleration is presented with experimental results. Further possibilities of beam handling in the induction synchrotron, such as super bunch and novel beam handling techniques, are discussed. K.Takayama et al., to be submitted to Phys. Rev. Lett. (2013). ** T.Iwashita et al., Phys. Rev. ST-AB 14, 071301(2011).
	Slides WEOAB02 [8.935 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEOAB02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Laser Ablation Ion Source for the KEK Digital Accelerator

598

N. Munemoto
Department of Energy Sciences, Tokyo Institute of Technology, Yokohama, Japan
Y. Fuwa, S. Ikeda, M. Kumaki
RIKEN, Saitama, Japan
Y. Fuwa
Kyoto ICR, Uji, Kyoto, Japan
S. Ikeda, K. Takayama
TIT, Yokohama, Japan
M. Kumaki
RISE, Tokyo, Japan
M. Okamura
BNL, Upton, Long Island, New York, USA
S. Takano, K. Takayama
KEK, Ibaraki, Japan
K. Takayama
Sokendai, Ibaraki, Japan

KEK Digital Accelerator (DA) is a small scale induction synchrotron and operated at 10Hz and recently has succeeded to accelerate gaseous ions*. There is a strong demand of fully striped carbon ions because the DA is regarded as the second generation of cancer therapy driver, which does not require an injector and electron stripper. We need a novel carbon ion source providing C⁶⁺ beams, which are directly injected into the DA and accelerated up to required energy. For this purpose, a laser ablation ion source(LAIS) is promising**. To obtain high yield C⁶⁺ ions from ablation plasma, the laser irradiation condition has been evaluated and relationship between beam properties of charge spectrum, intensity, and temperature, and carbon target materials were examined. Two laser systems, long pulse (6 ns) and short pulse (170 ps), were employed to irradiate a graphite and amorphous carbon target. The current densities and profile of the generated plasmas in time were measured and charge state distributions were analyzed. In addition we will report a full design integrating this LAIS, the extraction system, the longitudinal chopper system, and the low energy beam transport line.
* T.Yoshimoto et al., presented in this conference
** N.Munemoto et al., Proceedings of ICIS2013, published in Rev. Sci. Inst.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI010

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAB02

Wide-band Induction Acceleration in the KEK Digital Accelerator

1893

SUSPSNE021

use link to see paper's listing under its alternate paper code

T. Yoshimoto, X. Liu, K. Takayama
TIT, Yokohama, Japan
T. Adachi, K. Takayama
Sokendai, Ibaraki, Japan
T. Adachi, T. Arai, E. Kadokura, T. Kawakubo, X. Liu, K. Okamura, S. Takano, K. Takayama, T. Yoshimoto
KEK, Ibaraki, Japan
H. Asao, Y. Okada
NETS, Fuchu-shi, Japan
M. Hirose, H. Kobayashi
Tokyo City University, Tokyo, Japan

Induction synchrotron can accelerate any ion species directly to higher energy without a large pre-accelerator, due to its intrinsic nature that there is no frequency band-width limitation below 1 MHz. KEK digital accelerator (DA) is a small scale prototype of fast cycling induction synchrotron. Recently it has been confirmed that heavy ion beams of mass to charge ratio A/Q = 4 are stably accelerated from 200 keV to a few tens of MeV in this accelerator ring*, where the revolution frequency changes from82 kHz to 1 MHz. Acceleration and beam confinement are separately realized by pulse voltages generated in induction cells (1 to 1 pulse transformers) driven by the switching power supply (SPS)**. Everything is simply maneuvered by controlling of gate signals of solid-state switching elements employed in the SPS. For this purpose, the fully programmed acceleration control system based on the FPGA has been developed. In this paper, the wide-band induction acceleration is presented with experimental results. Further possibilities of beam handling in the induction synchrotron, such as super bunch and novel beam handling techniques, are discussed.
* K.Takayama et al., to be submitted to Phys. Rev. Lett. (2013).
** T.Iwashita et al., Phys. Rev. ST-AB 14, 071301(2011).

Slides WEOAB02 [8.935 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEOAB02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)