IPAC2014 - List of Authors (Steffen, B.)

Paper	Title	Page
TUPRI107	Compact MTCA.4 Based Laser Synchronization	1823
	M. Felber, Ł. Butkowski, H.T. Duhme, M. Fenner, C. Gerth, U. Mavrič, P. Peier, H. Schlarb, B. Steffen DESY, Hamburg, Germany T. Kozak, P. Prędki, K.P. Przygoda TUL-DMCS, Łódź, Poland
	In this paper we present a compact and efficient approach for laser synchronization based on MTCA.4 platform. Laser pulses are converted to the RF signals using a photo-diode detector. The RF section performs filtering, amplification and down-conversion of a narrowband, CW signal. The resulting IF signal is sampled by a high resolution digitizer on the AMC (Advanced Mezzanine Card) side and transported via point-to-point links to an adjacent AMC board. The processing electronics on this board drives a digital-to-analog converter on the rear-side. The analog signal is then filtered and amplified by a high voltage power amplifier which drives the piezo stretcher in the laser. Some preliminary results of laser to RF locking with such a scheme are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI107
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBB02	Status of Single-shot EOSD Measurement at ANKA	1909
	N. Hiller, A. Borysenko, E. Hertle, V. Judin, B. Kehrer, S. Marsching, A.-S. Müller, M.J. Nasse, M. Schuh, P. Schönfeldt, N.J. Smale, J.L. Steinmann KIT, Karlsruhe, Germany P. Peier, B. Steffen DESY, Hamburg, Germany V. Schlott PSI, Villigen PSI, Switzerland
	Funding: This work is funded by the BMBF contract numbers: 05K10VKC, 05K13VKA. ANKA is the first storage ring in the world with a near-field single-shot electro-optical (EO) bunch profile monitor. The method of electro-optical spectral decoding (EOSD) uses the Pockels effect to modulate the longitudinal electron bunch profile onto a long, chirped laser pulse passing through an EO crystal. The laser pulse is then analyzed with a single-shot spectrometer and from the spectral modulation, the temporal modulation can be extracted. The setup has a sub-ps resolution (granularity) and can measure down to bunch lengths of 1.5 ps RMS for bunch charges as low as 30 pC. With this setup it is possible to study longitudinal beam dynamics (e. g. microbunching) occurring during ANKA's low-alpha-operation, an operation mode with compressed bunches to generate coherent synchrotron radiation in the THz range. In addition to measuring the longitudinal bunch profile, long-ranging wake-fields trailing the electron bunch can also be studied, revealing bunch-bunch interactions.
	Slides WEOBB02 [12.753 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEOBB02
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO105	MTCA.4 Module for Cavity and Laser Piezo Operation	3140
	K.P. Przygoda, J. Branlard, M. Felber, C. Gerth, M. Heuer, U. Mavrič, P. Peier, H. Schlarb, B. Steffen DESY, Hamburg, Germany T. Kozak, P. Prędki TUL-DMCS, Łódź, Poland
	A MicroTCA.4 (MTCA.4) compliant Piezo Driver (DRTM-PZT4)* has been developed to drive piezoelectric-based actuators used in accelerator instrumentation applications. More specifically, it is used for superconducting cavities fine tuning, synchronization of pulsed lasers and stabilization of fiber links. This paper briefly presents the designed system requirements and discusses the main hardware issues. The Piezo Driver performance measurements are also discussed. The first results of the prototype hardware usage for laser locking** to an external RF source and fiber link stabilization are summarized. K. Przygoda et all.,“MTCA.4 Compilant Piezo Driver RTM for Laser Synchronization”,MIXDES'13*U. Mavric et. all, "Precision Synchronization of Optical Lasers based on MTCA.4 Electronics", IBIC'13
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO105
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME123	Electro-optical Bunch Length Monitor for FLUTE: Layout and Simulations	3527
	A. Borysenko, E. Hertle, N. Hiller, V. Judin, B. Kehrer, S. Marsching, A.-S. Müller, M.J. Nasse, R. Rossmanith, R. Ruprecht, M. Schuh, M. Schwarz, P. Wesolowski KIT, Karlsruhe, Germany B. Steffen DESY, Hamburg, Germany
	Funding: This work is funded by the European Union under contract PITN-GA-2011-289191 A new compact linear accelerator FLUTE is currently under construction at Karlsruhe Institute of Technology (KIT) in collaboration with DESY and PSI. It aims at obtaining femtosecond electron bunches (~1fs - 300 fs) with a wide charge range (1 pC - 3 nC) and requires a precise bunch length diagnostic system. Here we present the layout of a bunch length monitor based on the electro-optic technique of spectral decoding using an Yb-doped fiber laser system (central wavelength 1030 nm) and a GaP crystal. Simulations of the electro-optic signal for different operation modes of FLUTE were performed and main challenges are discussed in this talk. This work is funded by the European Union under contract PITN-GA-2011-289191
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME123
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Compact MTCA.4 Based Laser Synchronization

1823

M. Felber, Ł. Butkowski, H.T. Duhme, M. Fenner, C. Gerth, U. Mavrič, P. Peier, H. Schlarb, B. Steffen
DESY, Hamburg, Germany
T. Kozak, P. Prędki, K.P. Przygoda
TUL-DMCS, Łódź, Poland

In this paper we present a compact and efficient approach for laser synchronization based on MTCA.4 platform. Laser pulses are converted to the RF signals using a photo-diode detector. The RF section performs filtering, amplification and down-conversion of a narrowband, CW signal. The resulting IF signal is sampled by a high resolution digitizer on the AMC (Advanced Mezzanine Card) side and transported via point-to-point links to an adjacent AMC board. The processing electronics on this board drives a digital-to-analog converter on the rear-side. The analog signal is then filtered and amplified by a high voltage power amplifier which drives the piezo stretcher in the laser. Some preliminary results of laser to RF locking with such a scheme are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI107

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOBB02

Status of Single-shot EOSD Measurement at ANKA

1909

N. Hiller, A. Borysenko, E. Hertle, V. Judin, B. Kehrer, S. Marsching, A.-S. Müller, M.J. Nasse, M. Schuh, P. Schönfeldt, N.J. Smale, J.L. Steinmann
KIT, Karlsruhe, Germany
P. Peier, B. Steffen
DESY, Hamburg, Germany
V. Schlott
PSI, Villigen PSI, Switzerland

Funding: This work is funded by the BMBF contract numbers: 05K10VKC, 05K13VKA.
ANKA is the first storage ring in the world with a near-field single-shot electro-optical (EO) bunch profile monitor. The method of electro-optical spectral decoding (EOSD) uses the Pockels effect to modulate the longitudinal electron bunch profile onto a long, chirped laser pulse passing through an EO crystal. The laser pulse is then analyzed with a single-shot spectrometer and from the spectral modulation, the temporal modulation can be extracted. The setup has a sub-ps resolution (granularity) and can measure down to bunch lengths of 1.5 ps RMS for bunch charges as low as 30 pC. With this setup it is possible to study longitudinal beam dynamics (e. g. microbunching) occurring during ANKA's low-alpha-operation, an operation mode with compressed bunches to generate coherent synchrotron radiation in the THz range. In addition to measuring the longitudinal bunch profile, long-ranging wake-fields trailing the electron bunch can also be studied, revealing bunch-bunch interactions.

Slides WEOBB02 [12.753 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEOBB02

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO105

MTCA.4 Module for Cavity and Laser Piezo Operation

3140

K.P. Przygoda, J. Branlard, M. Felber, C. Gerth, M. Heuer, U. Mavrič, P. Peier, H. Schlarb, B. Steffen
DESY, Hamburg, Germany
T. Kozak, P. Prędki
TUL-DMCS, Łódź, Poland

A MicroTCA.4 (MTCA.4) compliant Piezo Driver (DRTM-PZT4)* has been developed to drive piezoelectric-based actuators used in accelerator instrumentation applications. More specifically, it is used for superconducting cavities fine tuning, synchronization of pulsed lasers and stabilization of fiber links. This paper briefly presents the designed system requirements and discusses the main hardware issues. The Piezo Driver performance measurements are also discussed. The first results of the prototype hardware usage for laser locking** to an external RF source and fiber link stabilization are summarized.
*K. Przygoda et all.,“MTCA.4 Compilant Piezo Driver RTM for Laser Synchronization”,MIXDES'13**U. Mavric et. all, "Precision Synchronization of Optical Lasers based on MTCA.4 Electronics", IBIC'13

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO105

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPME123

Electro-optical Bunch Length Monitor for FLUTE: Layout and Simulations

3527

A. Borysenko, E. Hertle, N. Hiller, V. Judin, B. Kehrer, S. Marsching, A.-S. Müller, M.J. Nasse, R. Rossmanith, R. Ruprecht, M. Schuh, M. Schwarz, P. Wesolowski
KIT, Karlsruhe, Germany
B. Steffen
DESY, Hamburg, Germany

Funding: This work is funded by the European Union under contract PITN-GA-2011-289191
A new compact linear accelerator FLUTE is currently under construction at Karlsruhe Institute of Technology (KIT) in collaboration with DESY and PSI. It aims at obtaining femtosecond electron bunches (~1fs - 300 fs) with a wide charge range (1 pC - 3 nC) and requires a precise bunch length diagnostic system. Here we present the layout of a bunch length monitor based on the electro-optic technique of spectral decoding using an Yb-doped fiber laser system (central wavelength 1030 nm) and a GaP crystal. Simulations of the electro-optic signal for different operation modes of FLUTE were performed and main challenges are discussed in this talk. This work is funded by the European Union under contract PITN-GA-2011-289191

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME123

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)