IPAC2014 - List of Authors (Scafuri, C.)

Paper	Title	Page
MOPME054	Upgrade of the Elettra Magnet Power Supply Controllers	495
	S. Cleva, M. Cautero, T.M. Cieśla, M. Lonza, L. Pivetta, C. Scafuri, R. Visintini Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Ageing of devices and components phasing-out, as well as the increasing maintenance costs, affect particle accelerators similarly to any industrial plant. A careful maintenance plan can cope with these problems in the medium-term, but then a complete update of the oldest parts is required. The most recent technologies available on the market together with a modular and open design approach are the basis of an upgrade program aimed at replacing the existing controllers of the Elettra storage ring magnet power supplies. The design considerations, the constraints and the first results are reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME054
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO013	FERMI Status Report	2885
	M. Svandrlik, E. Allaria, F. Bencivenga, C. Callegari, F. Capotondi, D. Castronovo, P. Cinquegrana, M. Coreno, R. Cucini, I. Cudin, G. D'Auria, M.B. Danailov, R. De Monte, G. De Ninno, P. Delgiusto, A.A. Demidovich, S. Di Mitri, B. Diviacco, A. Fabris, R. Fabris, W.M. Fawley, M. Ferianis, E. Ferrari, P. Finetti, L. Fröhlich, P. Furlan Radivo, G. Gaio, D. Gauthier, F. Gelmetti, L. Giannessi, M. Kiskinova, S. Krecic, M. Lonza, N. Mahne, C. Masciovecchio, M. Milloch, F. Parmigiani, G. Penco, L. Pivetta, O. Plekan, M. Predonzani, E. Principi, L. Raimondi, P. Rebernik Ribič, F. Rossi, L. Rumiz, C. Scafuri, C. Serpico, P. Sigalotti, C. Spezzani, C. Svetina, M. Trovò, A. Vascotto, M. Veronese, R. Visintini, D. Zangrando, M. Zangrando Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	FERMI, the seeded Free Electron Laser (FEL) located at the Elettra laboratory in Trieste, Italy, consists of two FEL lines. The FEL-1 facility, covering the wavelength range between 20 and 100 nm, was officially opened to external users. The shorter wavelength range, between 20 and 4 nm, is covered by the FEL-2 line, a double stage cascade operating in the “fresh bunch injection” mode, which is still under commissioning. We will report on the different FEL-1 operation modes that can be offered for users and assess the performance of the facility. The progress in the commissioning of FEL-2 will then be addressed, in particular reporting the performance attained at the lower wavelength limit; this aspect is of great interest for the user’s community of the FERMI seeded FEL since it allows to carry out experiments below the carbon K-edge.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO013
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO107	Application Programs of Elettra and FERMI@Elettra	3146
	F. Iazzourene, C. Scafuri Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	At Elettra we have high level software application programs used on the ring and others, based on the TANGO control, a new High Level Framework and a beam optics module, firstly developed and successfully used for the commissioning and operation of the Elettra booster and now for FERMI@Elettra transfer lines. The paper describes the present status and some of the application programs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO107
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Upgrade of the Elettra Magnet Power Supply Controllers

495

S. Cleva, M. Cautero, T.M. Cieśla, M. Lonza, L. Pivetta, C. Scafuri, R. Visintini
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Ageing of devices and components phasing-out, as well as the increasing maintenance costs, affect particle accelerators similarly to any industrial plant. A careful maintenance plan can cope with these problems in the medium-term, but then a complete update of the oldest parts is required. The most recent technologies available on the market together with a modular and open design approach are the basis of an upgrade program aimed at replacing the existing controllers of the Elettra storage ring magnet power supplies. The design considerations, the constraints and the first results are reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME054

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO013

FERMI Status Report

2885

M. Svandrlik, E. Allaria, F. Bencivenga, C. Callegari, F. Capotondi, D. Castronovo, P. Cinquegrana, M. Coreno, R. Cucini, I. Cudin, G. D'Auria, M.B. Danailov, R. De Monte, G. De Ninno, P. Delgiusto, A.A. Demidovich, S. Di Mitri, B. Diviacco, A. Fabris, R. Fabris, W.M. Fawley, M. Ferianis, E. Ferrari, P. Finetti, L. Fröhlich, P. Furlan Radivo, G. Gaio, D. Gauthier, F. Gelmetti, L. Giannessi, M. Kiskinova, S. Krecic, M. Lonza, N. Mahne, C. Masciovecchio, M. Milloch, F. Parmigiani, G. Penco, L. Pivetta, O. Plekan, M. Predonzani, E. Principi, L. Raimondi, P. Rebernik Ribič, F. Rossi, L. Rumiz, C. Scafuri, C. Serpico, P. Sigalotti, C. Spezzani, C. Svetina, M. Trovò, A. Vascotto, M. Veronese, R. Visintini, D. Zangrando, M. Zangrando
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

FERMI, the seeded Free Electron Laser (FEL) located at the Elettra laboratory in Trieste, Italy, consists of two FEL lines. The FEL-1 facility, covering the wavelength range between 20 and 100 nm, was officially opened to external users. The shorter wavelength range, between 20 and 4 nm, is covered by the FEL-2 line, a double stage cascade operating in the “fresh bunch injection” mode, which is still under commissioning. We will report on the different FEL-1 operation modes that can be offered for users and assess the performance of the facility. The progress in the commissioning of FEL-2 will then be addressed, in particular reporting the performance attained at the lower wavelength limit; this aspect is of great interest for the user’s community of the FERMI seeded FEL since it allows to carry out experiments below the carbon K-edge.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO013

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO107

Application Programs of Elettra and FERMI@Elettra

3146

F. Iazzourene, C. Scafuri
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

At Elettra we have high level software application programs used on the ring and others, based on the TANGO control, a new High Level Framework and a beam optics module, firstly developed and successfully used for the commissioning and operation of the Elettra booster and now for FERMI@Elettra transfer lines. The paper describes the present status and some of the application programs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO107

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)