IPAC2014 - List of Authors (Saeki, T.)

Paper	Title	Page
WEPRI023	Review of the Multilayer Coating Model	2522
	T. Kubo, T. Saeki KEK, Ibaraki, Japan Y. Iwashita Kyoto ICR, Uji, Kyoto, Japan
	Structures of alternating layers of superconducting (Sc) and insulating films formed on a bulk Sc proposed by A. Gurevich in 2006 are actively discussed these years, because of their great possibility in reducing power consumptions and in enhancing RF breakdown field of the Sc RF cavity. On Apr. 2013, we submitted general formulae for the vortex penetration field of the Sc layer and the shielded magnetic field on the bulk Sc for a structure with a single Sc layer and a single insulator layer formed on a bulk Sc, by which a combination of the thicknesses of Sc and insulator layers that can realize the enhanced RF breakdown field can be found for any given materials. In this contribution, we will show progresses during the last year. Comparisons between the formulae and experimental results, and extended formulae for more realistic models, such as a model with surface defects, will be shown. T. Kubo, Y. Iwashita, and T. Saeki, Appl. Phys. Lett. 104, 032603 (2014); arXiv:1304.6876 [physics.acc-ph]; arXiv:1306.4823 [physics.acc-ph]; arXiv:1307.0583 [physics.acc-ph].
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI023
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRI025	Studies of Fabrication Procedure of 9-cell SRF Cavity for ILC Mass-production at KEK.	2528
	T. Saeki, Y. Ajima, K. Enami, H. Hayano, H. Inoue, E. Kako, S. Kato, S. Koike, T. Kubo, S. Noguchi, M. Satoh, M. Sawabe, T. Shishido, A. Terashima, N. Toge, K. Ueno, K. Umemori, K. Watanabe, Y. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, M. Yamanaka, K. Yokoya KEK, Ibaraki, Japan Y. Iwashita Kyoto ICR, Uji, Kyoto, Japan N. Kawabata, H. Nakamura, K. Nohara, M. Shinohara SPS, Funabashi-shi, Japan F. Yasuda The University of Tokyo, Institute of Physics, Tokyo, Japan
	We had been constructing a new facility for the fabrication of superconducting RF cavity at KEK from 2009 to 2011. In the facility, we have installed a deep-drawing machine, a half-cup trimming machine, an electron-beam welding machine, and a chemical etching room in one place. We started the studies on the fabrication of 9-cell cavity for International Linear Collier (ILC) using this facility. The studies are focusing on the cost reduction with keeping high performance of cavity, and the goal is the establishment of mass-production procedure for ILC. We already finished the fabrication of two 9-cell cavities in this facility. This article reports the current status of the studies.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI025
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Review of the Multilayer Coating Model

2522

T. Kubo, T. Saeki
KEK, Ibaraki, Japan
Y. Iwashita
Kyoto ICR, Uji, Kyoto, Japan

Structures of alternating layers of superconducting (Sc) and insulating films formed on a bulk Sc proposed by A. Gurevich in 2006 are actively discussed these years, because of their great possibility in reducing power consumptions and in enhancing RF breakdown field of the Sc RF cavity. On Apr. 2013, we submitted general formulae for the vortex penetration field of the Sc layer and the shielded magnetic field on the bulk Sc for a structure with a single Sc layer and a single insulator layer formed on a bulk Sc, by which a combination of the thicknesses of Sc and insulator layers that can realize the enhanced RF breakdown field can be found for any given materials. In this contribution, we will show progresses during the last year. Comparisons between the formulae and experimental results, and extended formulae for more realistic models, such as a model with surface defects, will be shown.
T. Kubo, Y. Iwashita, and T. Saeki, Appl. Phys. Lett. 104, 032603 (2014); arXiv:1304.6876 [physics.acc-ph]; arXiv:1306.4823 [physics.acc-ph]; arXiv:1307.0583 [physics.acc-ph].

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI023

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRI025

Studies of Fabrication Procedure of 9-cell SRF Cavity for ILC Mass-production at KEK.

2528

T. Saeki, Y. Ajima, K. Enami, H. Hayano, H. Inoue, E. Kako, S. Kato, S. Koike, T. Kubo, S. Noguchi, M. Satoh, M. Sawabe, T. Shishido, A. Terashima, N. Toge, K. Ueno, K. Umemori, K. Watanabe, Y. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, M. Yamanaka, K. Yokoya
KEK, Ibaraki, Japan
Y. Iwashita
Kyoto ICR, Uji, Kyoto, Japan
N. Kawabata, H. Nakamura, K. Nohara, M. Shinohara
SPS, Funabashi-shi, Japan
F. Yasuda
The University of Tokyo, Institute of Physics, Tokyo, Japan

We had been constructing a new facility for the fabrication of superconducting RF cavity at KEK from 2009 to 2011. In the facility, we have installed a deep-drawing machine, a half-cup trimming machine, an electron-beam welding machine, and a chemical etching room in one place. We started the studies on the fabrication of 9-cell cavity for International Linear Collier (ILC) using this facility. The studies are focusing on the cost reduction with keeping high performance of cavity, and the goal is the establishment of mass-production procedure for ILC. We already finished the fabrication of two 9-cell cavities in this facility. This article reports the current status of the studies.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI025

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)