IPAC2014 - List of Authors (Rossbach, J.)

Paper	Title	Page
WEPRO114	SALOME: An Accelerator for the Practical Course in Accelerator Physics	2235
	V. Miltchev, D. Riebesehl, J. Roßbach, M. Trunk Uni HH, Hamburg, Germany O. Stein CERN, Geneva, Switzerland
	SALOME (Simple Accelerator for Learning Optics and the Manipulation of Electrons) is a short low energy linear electron accelerator built by the University of Hamburg. The goal of this project is to give the students the possibility to obtain hands-on experience with the basics of accelerator physics. In this contribution the layout of the device will be presented. The most important components of the accelerator will be discussed and an overview of the planned demonstration experiments will be given.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO114
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI033	Design of New Buncher Cavity for Relativistic Electron Gun for Atomic Exploration – REGAE	3840
	M. Fakhari, H. Delsim-Hashemi, K. Flöttmann, M. Hüning, S. Pfeiffer, H. Schlarb DESY, Hamburg, Germany J. Roßbach Uni HH, Hamburg, Germany
	The Relativistic Electron Gun for Atomic Exploration, REGAE, is a small electron accelerator build and operated at DESY. Its main application is to provide high quality electron bunches for time resolved diffraction experiments. The RF system of REGAE contains different parts such as low level RF, preamplifier, modulator, phase shifter, and cavities. A photocathode gun cavity to produce the electrons and a buncher cavity to compress the electron bunches in the following drift tube. Since the difference between the operating mode of the existing buncher and its adjacent mode is too small, the input power excites the other modes in addition to the operating mode which affects the beam parameters. A new buncher cavity is designed in order to improve the mode separation. Furthermore the whole cavity is modeled by a circuit which can be useful especially during the tuning process. Beam dynamics simulations have been performed in order to compare the new designed cavity with the old one which declare that the effects of the adjacent modes on the beam parameters are decreased.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI033
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

SALOME: An Accelerator for the Practical Course in Accelerator Physics

2235

V. Miltchev, D. Riebesehl, J. Roßbach, M. Trunk
Uni HH, Hamburg, Germany
O. Stein
CERN, Geneva, Switzerland

SALOME (Simple Accelerator for Learning Optics and the Manipulation of Electrons) is a short low energy linear electron accelerator built by the University of Hamburg. The goal of this project is to give the students the possibility to obtain hands-on experience with the basics of accelerator physics. In this contribution the layout of the device will be presented. The most important components of the accelerator will be discussed and an overview of the planned demonstration experiments will be given.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO114

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI033

Design of New Buncher Cavity for Relativistic Electron Gun for Atomic Exploration – REGAE

3840

M. Fakhari, H. Delsim-Hashemi, K. Flöttmann, M. Hüning, S. Pfeiffer, H. Schlarb
DESY, Hamburg, Germany
J. Roßbach
Uni HH, Hamburg, Germany

The Relativistic Electron Gun for Atomic Exploration, REGAE, is a small electron accelerator build and operated at DESY. Its main application is to provide high quality electron bunches for time resolved diffraction experiments. The RF system of REGAE contains different parts such as low level RF, preamplifier, modulator, phase shifter, and cavities. A photocathode gun cavity to produce the electrons and a buncher cavity to compress the electron bunches in the following drift tube. Since the difference between the operating mode of the existing buncher and its adjacent mode is too small, the input power excites the other modes in addition to the operating mode which affects the beam parameters. A new buncher cavity is designed in order to improve the mode separation. Furthermore the whole cavity is modeled by a circuit which can be useful especially during the tuning process. Beam dynamics simulations have been performed in order to compare the new designed cavity with the old one which declare that the effects of the adjacent modes on the beam parameters are decreased.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI033

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)