IPAC2014 - List of Authors (Petrosyan, V.H.)

Paper	Title	Page
MOPRO114	Particle Tracking Simulations with FLUKA for DESY FLASH and EXFEL	363
	V.G. Khachatryan, V.H. Petrosyan, A. Sargsyan, A.V. Tsakanian CANDLE SRI, Yerevan, Armenia
	The objective of the study is the simulation of the produced secondary radiation properties when the electron beam halo particles hit collimator walls. Using particle tracking simulation code FLUKA the European XFEL electron beam interaction with the titanium collimator and copper absorber of the undulator intersections as well as FLASH beam interaction with the tapered collimator were simulated. Absorbed dose spatial distribution in the material of the collimators was simulated for the total secondary radiation and its important photon and neutron components. Residual dose rate after irritation of the collimator material by the electron beam was calculated.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO114
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRI017	Status of AREAL RF Photogun Test Facility	620
	B. Grigoryan, G.A. Amatuni, V.S. Avagyan, H. Avdishyan, H. Davtyan, A.A. Gevorgyan, L.H. Hakobyan, M. Ivanyan, V.G. Khachatryan, E.M. Laziev, A. Lorsabyan, M. Manukyan, I.N. Margaryan, N. Martirosyan, T.H. Mkrtchyan, S. Naghdalyan, V.H. Petrosyan, H. Poladyan, V. Sahakyan, A. Sargsyan, A.V. Tsakanian, V.M. Tsakanov, A. Vardanyan, V. V. Vardanyan, G.S. Zanyan CANDLE SRI, Yerevan, Armenia T.K. Sargsyan LT-PYRKAL cjsc, Yerevan, Armenia
	Advanced Research Electron Accelerator Laboratory (AREAL) is a 20 MeV laser driven RF linear accelerator which is being constructed in the CANDLE institute. The construction of phase-1 is finished and at present the machine commissioning is in progress. In phase-1 a photocathode RF gun provides a 5 MeV small emittance electron beam with the 100 pC bunch charge and variable electron bunch length from 0.5 to 8 ps. Two main operation modes are foreseen for this phase – single and multibunch regimes to satisfy experimental demands. We report the status of linac, first experience and nearest machine run schedule. The brief review of the facility, main parameters, performance and first results are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRI039	Radiation Safety Considerations for Areal Electron Linac With Beam Diagnostic System	1647
	V.G. Khachatryan, V.H. Petrosyan, A. Sargsyan CANDLE SRI, Yerevan, Armenia
	The AREAL linear accelerator will produce electron beam with 5 MeV energy and further upgrade up to 20 MeV. At the first stage of the operation the construction of the beam diagnostic section of complex shape and layout is planned thus making the radiation source definition difficult. FLUKA particle tracking simulation code was used to calculate produced radiation dose rates and define an appropriate radiation shielding.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Particle Tracking Simulations with FLUKA for DESY FLASH and EXFEL

363

V.G. Khachatryan, V.H. Petrosyan, A. Sargsyan, A.V. Tsakanian
CANDLE SRI, Yerevan, Armenia

The objective of the study is the simulation of the produced secondary radiation properties when the electron beam halo particles hit collimator walls. Using particle tracking simulation code FLUKA the European XFEL electron beam interaction with the titanium collimator and copper absorber of the undulator intersections as well as FLASH beam interaction with the tapered collimator were simulated. Absorbed dose spatial distribution in the material of the collimators was simulated for the total secondary radiation and its important photon and neutron components. Residual dose rate after irritation of the collimator material by the electron beam was calculated.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO114

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRI017

Status of AREAL RF Photogun Test Facility

620

B. Grigoryan, G.A. Amatuni, V.S. Avagyan, H. Avdishyan, H. Davtyan, A.A. Gevorgyan, L.H. Hakobyan, M. Ivanyan, V.G. Khachatryan, E.M. Laziev, A. Lorsabyan, M. Manukyan, I.N. Margaryan, N. Martirosyan, T.H. Mkrtchyan, S. Naghdalyan, V.H. Petrosyan, H. Poladyan, V. Sahakyan, A. Sargsyan, A.V. Tsakanian, V.M. Tsakanov, A. Vardanyan, V. V. Vardanyan, G.S. Zanyan
CANDLE SRI, Yerevan, Armenia
T.K. Sargsyan
LT-PYRKAL cjsc, Yerevan, Armenia

Advanced Research Electron Accelerator Laboratory (AREAL) is a 20 MeV laser driven RF linear accelerator which is being constructed in the CANDLE institute. The construction of phase-1 is finished and at present the machine commissioning is in progress. In phase-1 a photocathode RF gun provides a 5 MeV small emittance electron beam with the 100 pC bunch charge and variable electron bunch length from 0.5 to 8 ps. Two main operation modes are foreseen for this phase – single and multibunch regimes to satisfy experimental demands. We report the status of linac, first experience and nearest machine run schedule. The brief review of the facility, main parameters, performance and first results are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRI039

Radiation Safety Considerations for Areal Electron Linac With Beam Diagnostic System

1647

V.G. Khachatryan, V.H. Petrosyan, A. Sargsyan
CANDLE SRI, Yerevan, Armenia

The AREAL linear accelerator will produce electron beam with 5 MeV energy and further upgrade up to 20 MeV. At the first stage of the operation the construction of the beam diagnostic section of complex shape and layout is planned thus making the radiation source definition difficult. FLUKA particle tracking simulation code was used to calculate produced radiation dose rates and define an appropriate radiation shielding.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)