IPAC2014 - List of Authors (Obina, T.)

Paper	Title	Page
MOPRO084	Recent Development and Operational Status of PF-Ring and PF-AR	286
	T. Honda, M. Adachi, S. Asaoka, K. Haga, K. Harada, Y. Honda, M. Izawa, T. Kageyama, Y. Kamiya, Y. Kobayashi, K. Marutsuka, T. Miyajima, H. Miyauchi, S. Nagahashi, N. Nakamura, T. Nogami, T. Obina, M. Ono, T. Ozaki, H. Sagehashi, H. Sakai, S. Sakanaka, H. Sasaki, Y. Sato, M. Shimada, K. Shinoe, T. Shioya, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, Y. Tanimoto, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, K. Watanabe, M. Yamamoto, Ma. Yoshida, S.I. Yoshimoto KEK, Ibaraki, Japan
	Update of the first-generation undulators installed in 1980s is pushed forward at PF-Ring, a 2.5-GeV SR source of KEK, taking advantage of the expanded straight sections reconstructed in 2005. New undulators have been designed as elliptically polarizing undulators each has 6 magnetic arrays to obtain various polarization states, not only circular polarization but also linear (horizontal and vertical) polarization. Three undulators will be installed in FY2013 and FY2014 for BL02, BL13 and BL28. For BL02, the longest straight section of about 9 m, the new undulator will be installed in tandem with the existing planar undulator, in order to cover the wide photon energy range from 15 eV to 2 keV. At PF-AR, a 6.5-GeV SR source, a new direct beam transport (BT) line from the injector LINAC is under construction. Super KEKB which shares the injector LINAC with PF-Ring and PF-AR will be commissioned at the end of FY2014. The full-energy continuous injection of PF-AR will be available as a simultaneous injection with the 7-GeV HER, the 4-GeV LER and PF-Ring not so later than the commissioning of Super KEKB.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO084
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRO110	Present Status of the Compact ERL at KEK	353
	N. Nakamura, M. Adachi, S. Adachi, M. Akemoto, D.A. Arakawa, S. Asaoka, K. Enami, K. Endo, S. Fukuda, T. Furuya, K. Haga, K. Hara, K. Harada, T. Honda, Y. Honda, H. Honma, T. Honma, K. Hosoyama, K. Hozumi, A. Ishii, E. Kako, Y. Kamiya, H. Katagiri, H. Kawata, Y. Kobayashi, Y. Kojima, Y. Kondou, T. Kume, T. Matsumoto, H. Matsumura, H. Matsushita, S. Michizono, T. Miura, T. Miyajima, H. Miyauchi, S. Nagahashi, H. Nakai, H. Nakajima, K. Nakanishi, K. Nakao, K.N. Nigorikawa, T. Nogami, S. Noguchi, S. Nozawa, T. Obina, T. Ozaki, F. Qiu, H. Sagehashi, H. Sakai, S. Sakanaka, S. Sasaki, K. Satoh, M. Satoh, T. Shidara, M. Shimada, K. Shinoe, T. Shioya, T. Shishido, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, T. Takenaka, O. Tanaka, Y. Tanimoto, M. Tobiyama, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, K. Watanabe, M. Yamamoto, Y. Yamamoto, Y. Yano, M. Yoshida KEK, Ibaraki, Japan E. Cenni Sokendai, Ibaraki, Japan R. Hajima, S. Matsuba, R. Nagai, N. Nishimori, M. Sawamura, T. Shizuma JAEA, Ibaraki-ken, Japan J.G. Hwang KNU, Deagu, Republic of Korea M. Kuriki Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan Y. Seimiya HU/AdSM, Higashi-Hiroshima, Japan
	The Compact Energy Recovery Linac (cERL) project is ongoing at KEK in order to demonstrate excellent ERL performance as a future light source. The cERL injector was already constructed with its diagnostic beamline and successfully commissioned from April to June in 2013. In the next step, the cERL recirculation loop with a main superconducting linac and merger and dump sections has been constructed and its commissioning is scheduled to start in December 2013. Significant progress is expected by the IPAC14 conference date. In this presentation, we will describe the present status of the cERL including future developments.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO110
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAA03	Transverse Intra-bunch Feedback in the J-PARC MR	2786
SUSPSNE086	use link to see paper's listing under its alternate paper code
	K. Nakamura Kyoto University, Kyoto, Japan Y.H. Chin, T. Obina, M. Okada, M. Tobiyama KEK, Ibaraki, Japan T. Koseki, T. Toyama J-PARC, KEK & JAEA, Ibaraki-ken, Japan Y. Shobuda JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
	We will report the development of a new broadband (bandwidth of around 100MHz) feedback system for suppression of intra-bunch oscillations and reduction of particle losses at the J-PARC Main Ring (MR). A new BPM has been designed based on the exponential coupler stripline type (the diameter of 134 mm and the length of 300 mm) and it is now under fabrication. In this BPM system, the frequency characteristics are corrected using the equalizer as bunch signals are differentiated. The design detail and the performance of the new BPM as well as preparation of newly installed exciter and power amplifiers will be presented. We will also report beam test results of head-tail mode suppression at 3 GeV with the bunch length of 150-250 ns.
	Slides THOAA03 [1.149 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THOAA03
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO093	Low Emittance Electron Beam Transportation in Compact ERL Injector	3104
	T. Miyajima, K. Harada, Y. Honda, T. Kume, S. Nagahashi, N. Nakamura, T. Obina, S. Sakanaka, M. Shimada, R. Takai, T. Uchiyama, A. Ueda, M. Yamamoto KEK, Ibaraki, Japan R. Hajima, R. Nagai, N. Nishimori JAEA, Ibaraki-ken, Japan J.G. Hwang Kyungpook National University, Daegu, Republic of Korea
	For future light source based on Energy Recovery Linac (ERL), an injector, which consists of a photocathode DC gun and superconducting RF cavities, is a key part to generate a low emittance, short pulse and high bunch charge electron beam. In compact ERL (cERL) which is a test accelerator to develop key technologies for ERL, the generation of low emittance electron beam with 0.1 mm mrad normalized emittance and 390 keV beam energy from the photocathode DC gun, and the acceleration to 5.6 MeV by superconducting cavity, were demonstrated in the first beam commissioning. To keep the high quality in the beam transportation, understanding the beam optics, which is affected by not only the focusing effects due to the gun, solenoid magnets and RF cavities but also space charge effect, is required. In this presentation, we will show that how to measure and correct the focusing effect by experimental method. Using this method, we succeeded in correcting the analytical model to give the good agreement with the measured gun focusing for low charge beam. And, we will show the space charge effect for high bunch charge beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO093
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO109	Design and Status of the SuperKEKB Accelerator Control Network System	3150
	M. Iwasaki, K. Furukawa, T.T. Nakamura, T. Obina, S. Sasaki, M. Satoh KEK, Ibaraki, Japan T. Aoyama, T. Nakamura Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan
	We have upgraded the accelerator control network system for SuperKEKB, the upgrade of the KEKB asymmetric energy e⁺e⁻ collider for the next generation B-factory experiment in Japan. For SuperKEKB, the accelerator control network system with the higher performance of the wider bandwidth data transfer, and more reliable and redundant configuration, is required, to ensure the robust operations under the 40 times higher luminosity. We install the 10 gigabit Ethernet (10GbE) network switches for the wider network bandwidth and optical cables to construct the redundant network. We reconfigure the network design to connect the accelerator control network and the KEK laboratory network to enhance the security. For the beamline construction and the accelerator components maintenance, we install the new wireless network system consists with the Leaky Coaxial (LCX) cable antennas and collinear antennas, which have good radiation hardness of >1MGy, into the 3 km circumference accelerator tunnel. In this paper, we describe the design and current status of the SuperKEKB accelerator control network system.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO109
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Recent Development and Operational Status of PF-Ring and PF-AR

286

T. Honda, M. Adachi, S. Asaoka, K. Haga, K. Harada, Y. Honda, M. Izawa, T. Kageyama, Y. Kamiya, Y. Kobayashi, K. Marutsuka, T. Miyajima, H. Miyauchi, S. Nagahashi, N. Nakamura, T. Nogami, T. Obina, M. Ono, T. Ozaki, H. Sagehashi, H. Sakai, S. Sakanaka, H. Sasaki, Y. Sato, M. Shimada, K. Shinoe, T. Shioya, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, Y. Tanimoto, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, K. Watanabe, M. Yamamoto, Ma. Yoshida, S.I. Yoshimoto
KEK, Ibaraki, Japan

Update of the first-generation undulators installed in 1980s is pushed forward at PF-Ring, a 2.5-GeV SR source of KEK, taking advantage of the expanded straight sections reconstructed in 2005. New undulators have been designed as elliptically polarizing undulators each has 6 magnetic arrays to obtain various polarization states, not only circular polarization but also linear (horizontal and vertical) polarization. Three undulators will be installed in FY2013 and FY2014 for BL02, BL13 and BL28. For BL02, the longest straight section of about 9 m, the new undulator will be installed in tandem with the existing planar undulator, in order to cover the wide photon energy range from 15 eV to 2 keV. At PF-AR, a 6.5-GeV SR source, a new direct beam transport (BT) line from the injector LINAC is under construction. Super KEKB which shares the injector LINAC with PF-Ring and PF-AR will be commissioned at the end of FY2014. The full-energy continuous injection of PF-AR will be available as a simultaneous injection with the 7-GeV HER, the 4-GeV LER and PF-Ring not so later than the commissioning of Super KEKB.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO084

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRO110

Present Status of the Compact ERL at KEK

353

N. Nakamura, M. Adachi, S. Adachi, M. Akemoto, D.A. Arakawa, S. Asaoka, K. Enami, K. Endo, S. Fukuda, T. Furuya, K. Haga, K. Hara, K. Harada, T. Honda, Y. Honda, H. Honma, T. Honma, K. Hosoyama, K. Hozumi, A. Ishii, E. Kako, Y. Kamiya, H. Katagiri, H. Kawata, Y. Kobayashi, Y. Kojima, Y. Kondou, T. Kume, T. Matsumoto, H. Matsumura, H. Matsushita, S. Michizono, T. Miura, T. Miyajima, H. Miyauchi, S. Nagahashi, H. Nakai, H. Nakajima, K. Nakanishi, K. Nakao, K.N. Nigorikawa, T. Nogami, S. Noguchi, S. Nozawa, T. Obina, T. Ozaki, F. Qiu, H. Sagehashi, H. Sakai, S. Sakanaka, S. Sasaki, K. Satoh, M. Satoh, T. Shidara, M. Shimada, K. Shinoe, T. Shioya, T. Shishido, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, T. Takenaka, O. Tanaka, Y. Tanimoto, M. Tobiyama, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, K. Watanabe, M. Yamamoto, Y. Yamamoto, Y. Yano, M. Yoshida
KEK, Ibaraki, Japan
E. Cenni
Sokendai, Ibaraki, Japan
R. Hajima, S. Matsuba, R. Nagai, N. Nishimori, M. Sawamura, T. Shizuma
JAEA, Ibaraki-ken, Japan
J.G. Hwang
KNU, Deagu, Republic of Korea
M. Kuriki
Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
Y. Seimiya
HU/AdSM, Higashi-Hiroshima, Japan

The Compact Energy Recovery Linac (cERL) project is ongoing at KEK in order to demonstrate excellent ERL performance as a future light source. The cERL injector was already constructed with its diagnostic beamline and successfully commissioned from April to June in 2013. In the next step, the cERL recirculation loop with a main superconducting linac and merger and dump sections has been constructed and its commissioning is scheduled to start in December 2013. Significant progress is expected by the IPAC14 conference date. In this presentation, we will describe the present status of the cERL including future developments.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO110

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOAA03

Transverse Intra-bunch Feedback in the J-PARC MR

2786

SUSPSNE086

use link to see paper's listing under its alternate paper code

K. Nakamura
Kyoto University, Kyoto, Japan
Y.H. Chin, T. Obina, M. Okada, M. Tobiyama
KEK, Ibaraki, Japan
T. Koseki, T. Toyama
J-PARC, KEK & JAEA, Ibaraki-ken, Japan
Y. Shobuda
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan

We will report the development of a new broadband (bandwidth of around 100MHz) feedback system for suppression of intra-bunch oscillations and reduction of particle losses at the J-PARC Main Ring (MR). A new BPM has been designed based on the exponential coupler stripline type (the diameter of 134 mm and the length of 300 mm) and it is now under fabrication. In this BPM system, the frequency characteristics are corrected using the equalizer as bunch signals are differentiated. The design detail and the performance of the new BPM as well as preparation of newly installed exciter and power amplifiers will be presented. We will also report beam test results of head-tail mode suppression at 3 GeV with the bunch length of 150-250 ns.

Slides THOAA03 [1.149 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THOAA03

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO093

Low Emittance Electron Beam Transportation in Compact ERL Injector

3104

T. Miyajima, K. Harada, Y. Honda, T. Kume, S. Nagahashi, N. Nakamura, T. Obina, S. Sakanaka, M. Shimada, R. Takai, T. Uchiyama, A. Ueda, M. Yamamoto
KEK, Ibaraki, Japan
R. Hajima, R. Nagai, N. Nishimori
JAEA, Ibaraki-ken, Japan
J.G. Hwang
Kyungpook National University, Daegu, Republic of Korea

For future light source based on Energy Recovery Linac (ERL), an injector, which consists of a photocathode DC gun and superconducting RF cavities, is a key part to generate a low emittance, short pulse and high bunch charge electron beam. In compact ERL (cERL) which is a test accelerator to develop key technologies for ERL, the generation of low emittance electron beam with 0.1 mm mrad normalized emittance and 390 keV beam energy from the photocathode DC gun, and the acceleration to 5.6 MeV by superconducting cavity, were demonstrated in the first beam commissioning. To keep the high quality in the beam transportation, understanding the beam optics, which is affected by not only the focusing effects due to the gun, solenoid magnets and RF cavities but also space charge effect, is required. In this presentation, we will show that how to measure and correct the focusing effect by experimental method. Using this method, we succeeded in correcting the analytical model to give the good agreement with the measured gun focusing for low charge beam. And, we will show the space charge effect for high bunch charge beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO093

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRO109

Design and Status of the SuperKEKB Accelerator Control Network System

3150

M. Iwasaki, K. Furukawa, T.T. Nakamura, T. Obina, S. Sasaki, M. Satoh
KEK, Ibaraki, Japan
T. Aoyama, T. Nakamura
Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan

We have upgraded the accelerator control network system for SuperKEKB, the upgrade of the KEKB asymmetric energy e⁺e⁻ collider for the next generation B-factory experiment in Japan. For SuperKEKB, the accelerator control network system with the higher performance of the wider bandwidth data transfer, and more reliable and redundant configuration, is required, to ensure the robust operations under the 40 times higher luminosity. We install the 10 gigabit Ethernet (10GbE) network switches for the wider network bandwidth and optical cables to construct the redundant network. We reconfigure the network design to connect the accelerator control network and the KEK laboratory network to enhance the security. For the beamline construction and the accelerator components maintenance, we install the new wireless network system consists with the Leaky Coaxial (LCX) cable antennas and collinear antennas, which have good radiation hardness of >1MGy, into the 3 km circumference accelerator tunnel. In this paper, we describe the design and current status of the SuperKEKB accelerator control network system.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO109

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)