IPAC2014 - List of Authors (Marteau, F.)

Paper	Title	Page
WEPRO027	W164: A Wiggler Dedicated to the PUMA Beamline and the FEMTOSLICING Project at SOLEIL	1998
	O. Marcouillé, H.B. Abualrob, P. Brunelle, L. Chapuis, M.-E. Couprie, T.K. El Ajjouri, M. Labat, J.L. Marlats, F. Marteau, A. Mary, A. Nadji, K. Tavakoli, M.-A. Tordeux, M. Valléau SOLEIL, Gif-sur-Yvette, France
	The W164 out-vacuum wiggler was designed and built at SOLEIL with the double goal of producing high energy photons for the PUMA beamline (10 keV to 70 keV) and to be used as a modulator for the FEMTOSLICING project. The insertion device requires simultaneously reaching low resonant energy (1.55 eV) and high critical energy of photons (above 10 keV), leading to the choice of high field and large periods. The 3.28 m long wiggler is composed of 20 periods of 164 mm made of NdFeB magnets and vanadium permendur poles. The required effective field for the FEMTOSLICING is 1.53 T and the maximum total field reaches 1.8T at the minimum gap of 14.5 mm. The small transverse size of the poles was optimized to minimize the magnetic forces (8 tons maximum) resulting, together with the large field produced at minimum gap, to a large vertical dynamic field integral (DFI) inside the horizontal physical aperture of the chamber. A dedicated permanent magnet system was designed, constructed and installed at both wiggler ends to cancel the DFI at minimum gap. The construction of the wiggler, the results of the magnetic measurements and the effects on dynamics measured on electron beam are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO027
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRO052	The ThomX Project Status	2062
	A. Variola, D. Auguste, A. Blin, J. Bonis, S. Bouaziz, C. Bruni, K. Cassou, I. Chaikovska, S. Chancé, V. Chaumat, R. Chiche, P. Cornebise, O. Dalifard, N. Delerue, T. Demma, I.V. Drebot, K. Dupraz, N. El Kamchi, M. El Khaldi, P. Gauron, A. Gonnin, E. Guerard, J. Haissinski, M. Jacquet, D. Jehanno, M. Jouvin, E. Jules, F. Labaye, M. Lacroix, M. Langlet, D. Le Guidec, P. Lepercq, R. Marie, J.C. Marrucho, A. Martens, B. Mercier, E. Mistretta, H. Monard, Y. Peinaud, A. Pérus, B. Pieyre, E. Plaige, C. Prevost, T. Roulet, R. Roux, V. Soskov, A. Stocchi, C. Vallerand, A. Vermes, F. Wicek, Y. Yan, J.F. Zhang, Z.F. Zomer LAL, Orsay, France P. Alexandre, C. Benabderrahmane, F. Bouvet, L. Cassinari, M.-E. Couprie, P. Deblay, Y. Dietrich, M. Diop, M.E. El Ajjouri, M.P. Gacoin, C. Herbeaux, N. Hubert, M. Labat, P. Lebasque, A. Lestrade, R. Lopes, A. Loulergue, P. Marchand, F. Marteau, D. Muller, A. Nadji, R. Nagaoka, J.-P. Pollina, F. Ribeiro, M. Ros, R. Sreedharan SOLEIL, Gif-sur-Yvette, France A. Bravin, G. Le Duc, J. Susini ESRF, Grenoble, France C. Bruyère, A. Cobessi, W. Del Net, J.L. Hazemann, J.L. Hodeau, P. Jeantet, J. Lacipière, O. Proux Institut NEEL, Grenoble, France E. Cormier, J. Lhermite CELIA, Talence, France L. De Viguerie, H. Rousselière, P. Walter LAMS, Universite Pierre et Marie Curie, Ivry Sur Seine, France H. Elleaume, F. Esteve INSERM, Grenoble Institut des Neurosciences, La Tronche, France J.M. Horodinsky, N. Pauwels, P. Robert CNRS (IRSD), Orsay, France S. Sierra TED, Velizy, France
	Funding: Work supported by the French Agence Nationale de la Recherche as part of the program EQUIPEX under reference ANR-10-EQPX-51, the Ile de France region, CNRS-IN2P3 and Université Paris Sud XI A collaboration of seven research institutes and an industry has been set up for the ThomX project, a compact Compton Backscattering Source (CBS) based in Orsay – France. After a period of study and definition of the machine performances a complete description of all the systems has been provided. The infrastructures work is started and the main systems are in the call for tender phase. In this paper we will illustrate the definitive machine parameters and components characteristics. We will also update the results of the different ongoing R&D on optical resonators, fast power supplies for the injection kickers and on the electron gun.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO052
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

W164: A Wiggler Dedicated to the PUMA Beamline and the FEMTOSLICING Project at SOLEIL

1998

O. Marcouillé, H.B. Abualrob, P. Brunelle, L. Chapuis, M.-E. Couprie, T.K. El Ajjouri, M. Labat, J.L. Marlats, F. Marteau, A. Mary, A. Nadji, K. Tavakoli, M.-A. Tordeux, M. Valléau
SOLEIL, Gif-sur-Yvette, France

The W164 out-vacuum wiggler was designed and built at SOLEIL with the double goal of producing high energy photons for the PUMA beamline (10 keV to 70 keV) and to be used as a modulator for the FEMTOSLICING project. The insertion device requires simultaneously reaching low resonant energy (1.55 eV) and high critical energy of photons (above 10 keV), leading to the choice of high field and large periods. The 3.28 m long wiggler is composed of 20 periods of 164 mm made of NdFeB magnets and vanadium permendur poles. The required effective field for the FEMTOSLICING is 1.53 T and the maximum total field reaches 1.8T at the minimum gap of 14.5 mm. The small transverse size of the poles was optimized to minimize the magnetic forces (8 tons maximum) resulting, together with the large field produced at minimum gap, to a large vertical dynamic field integral (DFI) inside the horizontal physical aperture of the chamber. A dedicated permanent magnet system was designed, constructed and installed at both wiggler ends to cancel the DFI at minimum gap. The construction of the wiggler, the results of the magnetic measurements and the effects on dynamics measured on electron beam are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO027

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRO052

The ThomX Project Status

2062

A. Variola, D. Auguste, A. Blin, J. Bonis, S. Bouaziz, C. Bruni, K. Cassou, I. Chaikovska, S. Chancé, V. Chaumat, R. Chiche, P. Cornebise, O. Dalifard, N. Delerue, T. Demma, I.V. Drebot, K. Dupraz, N. El Kamchi, M. El Khaldi, P. Gauron, A. Gonnin, E. Guerard, J. Haissinski, M. Jacquet, D. Jehanno, M. Jouvin, E. Jules, F. Labaye, M. Lacroix, M. Langlet, D. Le Guidec, P. Lepercq, R. Marie, J.C. Marrucho, A. Martens, B. Mercier, E. Mistretta, H. Monard, Y. Peinaud, A. Pérus, B. Pieyre, E. Plaige, C. Prevost, T. Roulet, R. Roux, V. Soskov, A. Stocchi, C. Vallerand, A. Vermes, F. Wicek, Y. Yan, J.F. Zhang, Z.F. Zomer
LAL, Orsay, France
P. Alexandre, C. Benabderrahmane, F. Bouvet, L. Cassinari, M.-E. Couprie, P. Deblay, Y. Dietrich, M. Diop, M.E. El Ajjouri, M.P. Gacoin, C. Herbeaux, N. Hubert, M. Labat, P. Lebasque, A. Lestrade, R. Lopes, A. Loulergue, P. Marchand, F. Marteau, D. Muller, A. Nadji, R. Nagaoka, J.-P. Pollina, F. Ribeiro, M. Ros, R. Sreedharan
SOLEIL, Gif-sur-Yvette, France
A. Bravin, G. Le Duc, J. Susini
ESRF, Grenoble, France
C. Bruyère, A. Cobessi, W. Del Net, J.L. Hazemann, J.L. Hodeau, P. Jeantet, J. Lacipière, O. Proux
Institut NEEL, Grenoble, France
E. Cormier, J. Lhermite
CELIA, Talence, France
L. De Viguerie, H. Rousselière, P. Walter
LAMS, Universite Pierre et Marie Curie, Ivry Sur Seine, France
H. Elleaume, F. Esteve
INSERM, Grenoble Institut des Neurosciences, La Tronche, France
J.M. Horodinsky, N. Pauwels, P. Robert
CNRS (IRSD), Orsay, France
S. Sierra
TED, Velizy, France

Funding: Work supported by the French Agence Nationale de la Recherche as part of the program EQUIPEX under reference ANR-10-EQPX-51, the Ile de France region, CNRS-IN2P3 and Université Paris Sud XI
A collaboration of seven research institutes and an industry has been set up for the ThomX project, a compact Compton Backscattering Source (CBS) based in Orsay – France. After a period of study and definition of the machine performances a complete description of all the systems has been provided. The infrastructures work is started and the main systems are in the call for tender phase. In this paper we will illustrate the definitive machine parameters and components characteristics. We will also update the results of the different ongoing R&D on optical resonators, fast power supplies for the injection kickers and on the electron gun.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO052

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)