| Paper | Title | Page |
|---|---|---|
| MOPRI070 | 2MeV Electron Cooler for COSY and HESR – First Results | 765 |
|
||
| The 2 MeV electron cooler was installed in the COSY ring in the spring 2013. The new system enables electron cooling in the whole energy range of COSY. The electron beam is guided by longitudinal magnetic field all the way from the electron gun to the collector. This well-proven optics scheme was chosen because of the wide electron energy range of 0.025-2 MeV. The electrostatic accelerator consists of 33 individual sections of identical design. Electrical power to each section is provided by a cascade transformer. Electron beam commissioning and first studies using proton and deuteron beams were carried out. Electron cooling of proton beam up to 1662 MeV kinetic energy was demonstrated. Maximum electron beam energy achieved so far amounted to 1.25 MeV. Voltage up to 1.4 MV was demonstrated. The cooler was operated with electron current up to 0.5 A. The paper provides insights into the recent progress in high energy electron cooling at COSY and perspectives for the HESR ring at FAIR. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI070 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| MOPRI072 | Simulation Study of Heavy Ion Beam Injection and Acceleration in the HESR for Internal Target Experiments with Cooling | 768 |
|
||
|
Recently, the feature of ion beam injection, storage and acceleration assisted by a barrier bucket and cooling has been investigated in the High Energy Storage Ring HESR at the new facility FAIR which will be built at the GSI Darmstadt. A bare uranium beam is injected from the collector ring CR into the HESR at 740 MeV/u*. The simulation studies are now improved to include different injection schemes applying either the barrier cavity or the h = 1 cavity in the HESR. It is outlined how the new 2.5 MeV electron cooler at COSY Jülich or stochastic cooling can support the injection mechanism. The beam preparation for an internal target experiment with cooling is outlined. The acceleration of the ion beam is extended to 5 GeV/u under the mandatory condition of the available cavity voltages and the maximum magnetic field ramp rate in the HESR. The flexibility of the HESR ring lattice is utilized to avoid transition energy crossing during ramping up to 5 GeV/u and to adjust the rings’ frequency slip factor for optimal stochastic cooling. The cooling simulations include the beam-target interaction due to a hydrogen target.
* H. Stockhorst et al., MOPEA018, IPAC13 |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI072 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPRO042 | Ion Optics of the HESR Storage Ring at FAIR for Operation with Heavy Ions | 1117 |
|
||
| The High Energy Storage Ring (HESR) of the FAIR project is primarily designed for internal target experiments with stored and cooled antiprotons, which is the main objective of the PANDA collaboration. However, the HESR storage ring also appears to have remarkable properties to carry out physics experiments with heavy ions. In this paper a new ion optical design allowing the heavy ion operation mode of the HESR is presented. The main goal was to provide an optics which meets the requirements of the future experiments with heavy ion beams. Closed orbit correction, dynamic aperture as well as other characteristics of beam dynamics of the ion optical setup are under analysis in this study. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRO042 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |