IPAC2014 - List of Authors (Liang, X.)

Paper	Title	Page
MOPRI059	Fabrication of Alkali Antimonide Photocathode for SRF Gun	742
	E. Wang, S.A. Belomestnykh, I. Ben-Zvi, D. Kayran, G.T. McIntyre, T. Rao, J. Smedley, D. Weiss, W. Xu BNL, Upton, Long Island, New York, USA I. Ben-Zvi, M. Ruiz-Osés Stony Brook University, Stony Brook, USA X. Liang SBU, Stony Brook, New York, USA H.M. Xie PKU, Beijing, People's Republic of China
	Funding: * This work is supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE and DOE grant The first alkali antimonide photocathode was prepared and inserted into the BNL 704 MHz SRF gun. An excimer laser cleaning system was installed in a cathode deposition chamber and the cleaning technique developed previously was used in the first cathode preparation. We also demonstrated that oxidized cathode can be removed by exposing it to the same excimer laser. In this paper, we show the set up of the incorporated laser cleaning system and the QE enhancement of alkali antimony photocathode. The vacuum evolution at transport cart and QE measurement system are also discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI059
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRI063	Alkali Antimonide Photocathodes in a Can	745
	J. Smedley, K. Attenkofer, T. Rao, S.G. Schubert BNL, Upton, Long Island, New York, USA I. Ben-Zvi, X. Liang, E.M. Muller, M. Ruiz-Osés Stony Brook University, Stony Brook, USA J. DeFazio PHOTONIS USA Pennsylvanis, Inc., Lancaster, Pennsylvania, USA H.A. Padmore, J.J. Wong LBNL, Berkeley, California, USA J. Xie ANL, Argonne, Illinois, USA
	Funding: Work was supported by the US DOE, under Contracts DE-AC02-05CH11231, DE-AC02-98CH10886, KC0407-ALSJNT-I0013, DE-FG02-12ER41837 and DE-SC0005713. Use of CHESS is supported by NSF award DMR-0936384. The next generation of x-ray light sources will need reliable, high quantum efficiency photocathodes. These cathodes will likely be from the alkali antimonide family, which currently holds the record for highest average current achieved from a photoinjector. In this work, we explore a new option for delivering these cathodes to a machine which requires them: use of sealed commercial vacuum tubes. Several sealed tubes have been introduced into a vacuum system and separated from their housing, exposing the active photocathode on a transport arm suitable for insertion into a photoinjector. The separation has been achieved without loss of QE. These cathodes are compared to those grown via traditional methods, both in terms of QE and in terms of crystalline structure, and found to be similar.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI063
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Fabrication of Alkali Antimonide Photocathode for SRF Gun

742

E. Wang, S.A. Belomestnykh, I. Ben-Zvi, D. Kayran, G.T. McIntyre, T. Rao, J. Smedley, D. Weiss, W. Xu
BNL, Upton, Long Island, New York, USA
I. Ben-Zvi, M. Ruiz-Osés
Stony Brook University, Stony Brook, USA
X. Liang
SBU, Stony Brook, New York, USA
H.M. Xie
PKU, Beijing, People's Republic of China

Funding: * This work is supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE and DOE grant
The first alkali antimonide photocathode was prepared and inserted into the BNL 704 MHz SRF gun. An excimer laser cleaning system was installed in a cathode deposition chamber and the cleaning technique developed previously was used in the first cathode preparation. We also demonstrated that oxidized cathode can be removed by exposing it to the same excimer laser. In this paper, we show the set up of the incorporated laser cleaning system and the QE enhancement of alkali antimony photocathode. The vacuum evolution at transport cart and QE measurement system are also discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI059

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPRI063

Alkali Antimonide Photocathodes in a Can

745

J. Smedley, K. Attenkofer, T. Rao, S.G. Schubert
BNL, Upton, Long Island, New York, USA
I. Ben-Zvi, X. Liang, E.M. Muller, M. Ruiz-Osés
Stony Brook University, Stony Brook, USA
J. DeFazio
PHOTONIS USA Pennsylvanis, Inc., Lancaster, Pennsylvania, USA
H.A. Padmore, J.J. Wong
LBNL, Berkeley, California, USA
J. Xie
ANL, Argonne, Illinois, USA

Funding: Work was supported by the US DOE, under Contracts DE-AC02-05CH11231, DE-AC02-98CH10886, KC0407-ALSJNT-I0013, DE-FG02-12ER41837 and DE-SC0005713. Use of CHESS is supported by NSF award DMR-0936384.
The next generation of x-ray light sources will need reliable, high quantum efficiency photocathodes. These cathodes will likely be from the alkali antimonide family, which currently holds the record for highest average current achieved from a photoinjector. In this work, we explore a new option for delivering these cathodes to a machine which requires them: use of sealed commercial vacuum tubes. Several sealed tubes have been introduced into a vacuum system and separated from their housing, exposing the active photocathode on a transport arm suitable for insertion into a photoinjector. The separation has been achieved without loss of QE. These cathodes are compared to those grown via traditional methods, both in terms of QE and in terms of crystalline structure, and found to be similar.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI063

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)