Author: Leemann, S.C.
Paper Title Page
TUPRI025 Interplay of Touschek Scattering, Intrabeam Scattering, and RF Cavities in Ultralow-emittance Storage Rings 1612
 
  • S.C. Leemann
    MAX-lab, Lund, Sweden
 
  When it goes into operation in 2016, the MAX IV 3 GeV storage ring will be the first ultralow-emittance storage ring based on a multibend achromat lattice. These lattices make use of a large number of weak bending magnets which considerably reduces the amount of power radiated in the dipoles in comparison to power radiated from insertion devices. Therefore parameters such as emittance, energy spread, and radiated power are no longer constant during a typical user shift. Since the charge per bunch is usually high, intrabeam scattering (IBS) becomes very strong creating a dependence of emittance on stored current. Since the bunch length can vary as insertion device gaps change, the emittance blow-up from IBS is not constant either. Therefore, the emittance, bunch length, and hence the resulting Touschek lifetime have to be calculated in a self-consistent fashion taking into account the bare lattice, RF cavity settings, bunch charge, and gap settings. This paper demonstrates the intricate interplay between transverse emittance (insertion devices, emittance coupling), longitudinal emittance (tuning of main cavities as well as harmonic Landau cavities), and choice of stored current.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI025  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPRI026 MAX IV Emittance Reduction and Brightness Improvement 1615
 
  • S.C. Leemann, M. Eriksson
    MAX-lab, Lund, Sweden
 
  With MAX IV construction well underway and storage ring commissioning expected to commence in July 2015, first studies have been launched to improve the optics of the MAX IV 3 GeV storage ring with the goal of further reducing the emittance from the baseline design (328 pm rad) towards 150 pm rad while improving the matching of the electron beam to insertion devices to further improve the resulting photon brightness. We report on progress in the development of this new optics taking into account the strong impact from intrabeam scattering and insertion devices on the resulting equilibrium emittance. We present initial results and sketch a path towards a first MAX IV upgrade.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI026  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPRO075 High-chromaticity Optics for the MAX IV 1.5 GeV Storage Ring 3053
SUSPSNE056   use link to see paper's listing under its alternate paper code  
 
  • T. Olsson, S.C. Leemann
    MAX-lab, Lund, Sweden
 
  The MAX IV facility currently under construction in Lund, Sweden will include a 1.5 GeV storage ring. To prevent head-tail instability, the negative natural chromaticities of the MAX IV 1.5 GeV storage ring have been corrected to positive values using sextupole gradients in the focusing quadrupoles along with dedicated sextupole magnets. To allow adjustment of the chromaticity correction, weak correction sextupoles have been inserted into the lattice. A high-chromaticity optics has been developed for the MAX IV 1.5 GeV storage ring in case instability issues arise during commissioning. Two chromatic sextupole families were used to correct the linear chromaticity. The tune footprint was then tailored using the remaining two sextupole families with the goal of maximizing dynamic aperture and Touschek lifetime. This paper describes the recently developed high-chromaticity optics for the MAX IV 1.5 GeV storage ring and discusses performance limitations of the optics constrained by available gradient strength in the sextupoles.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO075  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)