IPAC2014 - List of Authors (Kuan, C.K.)

Paper	Title	Page
THPME180	Vibration Measurement Experiment at TLS	3697
	C.C. Liang, C.K. Chou, S. Fann, C.K. Kuan, D. Lin, T.F. Lin, Y.-C. Liu, T.-C. Yu NSRRC, Hsinchu, Taiwan Y.-C. Liu NTHU, Hsinchu, Taiwan
	The oncoming completion of Taiwan Photon Source is closely constructed beside Taiwan Light Source (TLS). Few civil works are continuously under construction. Building the measurement, recording and analysis platform of software and hardware is the one of the main directions of operation group. To diagnose the instability problem of the light source, the external influence must be eliminated. One of the factors causing the instability is the physical vibration. Vibration measurement helps to evaluate if newly installed equipments are suited for adding on or the influence of the earthquake to the stability of TLS and to improve the light source quality for users. Software has been developed to provide assistance to do some preliminary diagnoses at TLS. In this article, some actual cases in routine operation are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME180
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI098	Brazing and Helium Leaking Test for High Heat Load Components in the Taiwan Photon Source	4004
	P.A. Lin, C.K. Kuan, T.Y. Lee, H.Y. Lin, I.C. Sheng NSRRC, Hsinchu, Taiwan
	Taiwan Photon Source is the second accelerator constructed by National Synchrotron Radiation Research Center (NSRRC). With 3GeV, 500mA, this facility will generate extremely high synchrotron radiation and most of the power load will be shadowed at front end in order to shape final confining beam size for beam lines users. The high heat load components are known to be the critical parts to absorb the unwanted energy. In order to practically distribute high density power along each high heat load components, several absorbers are introduced. Namely, primary mask, main mask, photon absorber and slits. The manufacturing process such as UHV chemical cleaning, brazing and helium leaking test will be described in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI098
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI099	Constructing and Installation of TPS Front End	4007
	Y.T. Cheng, Y.T. Cheng, J. -Y. Chuang, C.K. Kuan, T.Y. Lee, H.Y. Lin, P.A. Lin, Y.K. Liu NSRRC, Hsinchu, Taiwan
	National Synchrotron Radiation Research Center (NSRRC) in Taiwan is completing the construction of Taiwan Photon Source (TPS) synchrotron accelerator project. This 3GeV, 500mA beam current 3rd generation synchrotron accelerator will have total of 7 insertion device beam lines at day one. Corresponding front ends have been design and fabricated. Installation and craning is underway. Current status of frond end are reported and presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI099
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI108	Manufacturing and Inspecting Supporting Tables for Front End in Taiwan Photon Source	4031
	P.A. Lin, K.H. Hsu, C.K. Kuan, C.-S. Lin, H.Y. Lin, I.C. Sheng NSRRC, Hsinchu, Taiwan
	Taiwan Photon Source is the second accelerator constructed by National Synchrotron Radiation Research Center with energy 3 GeV and 500 mA beam current. In order to install and support front end components those table are designed and constructed. The results of manufacturing and inspecting tables are one of the primary factors that will directly affect the final confining aperture to the end usres. Those supporting table has six types and are all designed and simulated by Solidworks. Different alignment and measurement tools are utilized to inspect these tables. In addition, some results of final post-installation measurement and vibration test are also reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI108
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Vibration Measurement Experiment at TLS

3697

C.C. Liang, C.K. Chou, S. Fann, C.K. Kuan, D. Lin, T.F. Lin, Y.-C. Liu, T.-C. Yu
NSRRC, Hsinchu, Taiwan
Y.-C. Liu
NTHU, Hsinchu, Taiwan

The oncoming completion of Taiwan Photon Source is closely constructed beside Taiwan Light Source (TLS). Few civil works are continuously under construction. Building the measurement, recording and analysis platform of software and hardware is the one of the main directions of operation group. To diagnose the instability problem of the light source, the external influence must be eliminated. One of the factors causing the instability is the physical vibration. Vibration measurement helps to evaluate if newly installed equipments are suited for adding on or the influence of the earthquake to the stability of TLS and to improve the light source quality for users. Software has been developed to provide assistance to do some preliminary diagnoses at TLS. In this article, some actual cases in routine operation are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME180

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI098

Brazing and Helium Leaking Test for High Heat Load Components in the Taiwan Photon Source

4004

P.A. Lin, C.K. Kuan, T.Y. Lee, H.Y. Lin, I.C. Sheng
NSRRC, Hsinchu, Taiwan

Taiwan Photon Source is the second accelerator constructed by National Synchrotron Radiation Research Center (NSRRC). With 3GeV, 500mA, this facility will generate extremely high synchrotron radiation and most of the power load will be shadowed at front end in order to shape final confining beam size for beam lines users. The high heat load components are known to be the critical parts to absorb the unwanted energy. In order to practically distribute high density power along each high heat load components, several absorbers are introduced. Namely, primary mask, main mask, photon absorber and slits. The manufacturing process such as UHV chemical cleaning, brazing and helium leaking test will be described in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI098

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI099

Constructing and Installation of TPS Front End

4007

Y.T. Cheng, Y.T. Cheng, J. -Y. Chuang, C.K. Kuan, T.Y. Lee, H.Y. Lin, P.A. Lin, Y.K. Liu
NSRRC, Hsinchu, Taiwan

National Synchrotron Radiation Research Center (NSRRC) in Taiwan is completing the construction of Taiwan Photon Source (TPS) synchrotron accelerator project. This 3GeV, 500mA beam current 3rd generation synchrotron accelerator will have total of 7 insertion device beam lines at day one. Corresponding front ends have been design and fabricated. Installation and craning is underway. Current status of frond end are reported and presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI099

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRI108

Manufacturing and Inspecting Supporting Tables for Front End in Taiwan Photon Source

4031

P.A. Lin, K.H. Hsu, C.K. Kuan, C.-S. Lin, H.Y. Lin, I.C. Sheng
NSRRC, Hsinchu, Taiwan

Taiwan Photon Source is the second accelerator constructed by National Synchrotron Radiation Research Center with energy 3 GeV and 500 mA beam current. In order to install and support front end components those table are designed and constructed. The results of manufacturing and inspecting tables are one of the primary factors that will directly affect the final confining aperture to the end usres. Those supporting table has six types and are all designed and simulated by Solidworks. Different alignment and measurement tools are utilized to inspect these tables. In addition, some results of final post-installation measurement and vibration test are also reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI108

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)