Author: Karamysheva, G.A.
Paper Title Page
TUPRO099 Development of a Method for Measuring the Radial Component of the Magnetic Field in AVF Cyclotrons 1274
 
  • N.A. Morozov, G.A. Karamysheva, S.A. Kostromin, E. Samsonov, N.G. Shakun, E. Syresin
    JINR, Dubna, Moscow Region, Russia
 
  In AVF cyclotrons the median plane of the magnetic field rather often does not coincide with the mid-plane of their magnetic system. To measure the radial component of the magnetic field, equipment based on search coils is developed and used to correct the median plane of the magnetic field. The equipment for Br mapping is described. The Br mapping and shimming results are presented for two proton therapy IBA C230 cyclotrons.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRO099  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPRO106 Complex “ALFA” After 10 Years of Operation on Track Membranes Production 2212
 
  • G.A. Karamysheva, Yu.N. Denisov
    JINR, Dubna, Moscow Region, Russia
 
  The film irradiation complex “ALFA” dedicated to expose the polymer films used in the track membranes production was designed and manufactured by Joint Institute for Nuclear Research for “TRACKPORE TECHNOLOGY" holding company and put into operation in 2002 year in Dubna, Russia. The complex consists of the isochronous cyclotron CYTRACK with external injection of ions, the extraction system, the beam transport of accelerated ions and the film irradiation chamber. Cyclotron CYTRACK accelerates argon ions upto the energy - 2,4 МeV/nucleon, intensity of extracted beam is about 500nA, extraction efficiency totaled 50%. The complex “ALFA” products polyethylene terephthalate track membranes with less than 25 μm thickness and less than 40cm width. After ten years of the successful operation complex “ALFA” was upgraded. Vacuum, control and power supply systems were replaced. As a result the stability and efficiency of the operation of the equipment were increased.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO106  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPRI090 Cyclotron C235-V3 for Dimitrovgrad Hospital Center of the Proton Therapy 2703
 
  • S.A. Kostromin, S. Gurskiy, G.A. Karamysheva, M.Y. Kazarinov, S.A. Korovkin, S.P. Mokrenko, N.A. Morozov, A.G. Olshevsky, V.M. Romanov, E. Samsonov, N.G. Shakun, G. Shirkov, S.G. Shirkov, E. Syresin
    JINR, Dubna, Moscow Region, Russia
  • P. Cahay, Y. Jongen, Y. Paradis
    IBA, Louvain-la-Neuve, Belgium
 
  JINR-IBA C235-V3 isochronous cyclotron for 1st Russian hospital center of the proton therapy has been assembled and tested. Shimming of the magnetic field, optimization of the acceleration modes and testing with the extracted proton beam were done in frame of this work. The paper presents experimental results of the beam dynamics in the accelerator. Proton transmission from radius 30cm to 103cm is 72% without beam cutting diaphragms. The extraction efficiency is 62%. This cyclotron is a substantially modified version C235-V3 of the IBA C235 serial cyclotron. C235-V3 has the improved extraction system which was constructed and tested. This system allows raise the extraction efficiency up to 77% from 50% in comparison with serial C235. Special mapping system (for Br-component) of the magnetic field was developed and constructed by JINR for the shimming of the Br-field in the middle plane of the cyclotron. Total efficiency of the machine is 45%. Further improvement of the parameters expected after final tuning of the cyclotron in Dimitrovgrad.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI090  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)