Author: Delerue, N.
Paper Title Page
WEPRO001 Effect of Beam Dynamics Processes in the Low Energy Ring ThomX 1933
 
  • N. Delerue, C. Bruni, I. Chaikovska, I.V. Drebot, M. Jacquet, A. Variola, Z.F. Zomer
    LAL, Orsay, France
  • A. Loulergue
    SOLEIL, Gif-sur-Yvette, France
 
  Funding: This work is supported by the French "Agence Nationale de la Recherche" as part of the program "investing in the future" under reference ANR-10-EQPX-51 and by grants from Région Ile-de-France.
As part of the R&D for the 50 MeV ThomX Compton source project, we have studied the effect of several beam dynamics processes on the evolution of the beam in the ring. The processes studied include among others Compton scattering, intrabeam scattering, coherent synchrotron radiation. We have performed extensive simulations of a full injection/extraction cycle (400000 turns). We show how each of these processes degrades the flux of photons produced and how a feedback system contributes to recovering most of the flux.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO001  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPRO052 The ThomX Project Status 2062
 
  • A. Variola, D. Auguste, A. Blin, J. Bonis, S. Bouaziz, C. Bruni, K. Cassou, I. Chaikovska, S. Chancé, V. Chaumat, R. Chiche, P. Cornebise, O. Dalifard, N. Delerue, T. Demma, I.V. Drebot, K. Dupraz, N. El Kamchi, M. El Khaldi, P. Gauron, A. Gonnin, E. Guerard, J. Haissinski, M. Jacquet, D. Jehanno, M. Jouvin, E. Jules, F. Labaye, M. Lacroix, M. Langlet, D. Le Guidec, P. Lepercq, R. Marie, J.C. Marrucho, A. Martens, B. Mercier, E. Mistretta, H. Monard, Y. Peinaud, A. Pérus, B. Pieyre, E. Plaige, C. Prevost, T. Roulet, R. Roux, V. Soskov, A. Stocchi, C. Vallerand, A. Vermes, F. Wicek, Y. Yan, J.F. Zhang, Z.F. Zomer
    LAL, Orsay, France
  • P. Alexandre, C. Benabderrahmane, F. Bouvet, L. Cassinari, M.-E. Couprie, P. Deblay, Y. Dietrich, M. Diop, M.E. El Ajjouri, M.P. Gacoin, C. Herbeaux, N. Hubert, M. Labat, P. Lebasque, A. Lestrade, R. Lopes, A. Loulergue, P. Marchand, F. Marteau, D. Muller, A. Nadji, R. Nagaoka, J.-P. Pollina, F. Ribeiro, M. Ros, R. Sreedharan
    SOLEIL, Gif-sur-Yvette, France
  • A. Bravin, G. Le Duc, J. Susini
    ESRF, Grenoble, France
  • C. Bruyère, A. Cobessi, W. Del Net, J.L. Hazemann, J.L. Hodeau, P. Jeantet, J. Lacipière, O. Proux
    Institut NEEL, Grenoble, France
  • E. Cormier, J. Lhermite
    CELIA, Talence, France
  • L. De Viguerie, H. Rousselière, P. Walter
    LAMS, Universite Pierre et Marie Curie, Ivry Sur Seine, France
  • H. Elleaume, F. Esteve
    INSERM, Grenoble Institut des Neurosciences, La Tronche, France
  • J.M. Horodinsky, N. Pauwels, P. Robert
    CNRS (IRSD), Orsay, France
  • S. Sierra
    TED, Velizy, France
 
  Funding: Work supported by the French Agence Nationale de la Recherche as part of the program EQUIPEX under reference ANR-10-EQPX-51, the Ile de France region, CNRS-IN2P3 and Université Paris Sud XI
A collaboration of seven research institutes and an industry has been set up for the ThomX project, a compact Compton Backscattering Source (CBS) based in Orsay – France. After a period of study and definition of the machine performances a complete description of all the systems has been provided. The infrastructures work is started and the main systems are in the call for tender phase. In this paper we will illustrate the definitive machine parameters and components characteristics. We will also update the results of the different ongoing R&D on optical resonators, fast power supplies for the injection kickers and on the electron gun.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO052  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPRO003 Progress of the LUNEX5 demonstator Project 2856
 
  • M.-E. Couprie, C. Benabderrahmane, P. Berteaud, C. Bourassin-Bouchet, F. Bouvet, L. Cassinari, L. Chapuis, J. Daillant, M. Diop, M.E. El Ajjouri, C. Evain, C. Herbeaux, N. Hubert, M. Labat, P. Lebasque, A. Lestrade, A. Loulergue, P. Marchand, O. Marcouillé, J.L. Marlats, C. Miron, P. Morin, A. Nadji, F. Polack, F. Ribeiro, J.P. Ricaud, P. Roy, K. Tavakoli, M. Valléau, D. Zerbib
    SOLEIL, Gif-sur-Yvette, France
  • S. Bielawski, E. Roussel, C. Szwaj
    PhLAM/CERCLA, Villeneuve d'Ascq Cedex, France
  • B. Carré, D. Garzella
    CEA/DSM/DRECAM/SPAM, Gif-sur-Yvette, France
  • X. Davoine
    CEA/DAM/DIF, Arpajon, France
  • N. Delerue
    LAL, Orsay, France
  • G. Devanz
    CEA/DSM/IRFU, France
  • A. Dubois, J. Lüning
    CCPMR, Paris, France
  • G. Lambert, R. Lehé, V. Malka, A. Rousse, C. Thaury
    LOA, Palaiseau, France
  • C. Madec, A. Mosnier
    CEA/IRFU, Gif-sur-Yvette, France
 
  LUNEX5 (free electron Laser Using a New accelerator for the Exploitation of X-ray radiation of 5th generation) aims at investigating the production of short, intense, coherent pulses in the 40-4 nm spectral range [1]. It comprises two types of accelerators connected to a single Free Electron Laser (FEL) for advanced seeding configurations (seeding with High order Harmonic in Gas, echo). A 400 MeV superconducting Linear Accelerator, adapted for studies of advanced FEL schemes, will enable future upgrade towards high repetition rate and multi-user operation by splitting part of the macropulse to different FEL lines. A 0.4 - 1 GeV Laser Wake Field Accelerator (LWFA) [2] will also be qualified by the FEL application. After the Conceptual Design Report, R&D has been launched on different sub components. Following transport theoretical studies of longitudinal and transverse manipulation of a LWFA electron beam enabling to provide theoretical amplification, a test experiment is under preparation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRO003  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPME086 Optical Fiber Beam Loss Monitor for the PHIL and ThomX Facilities 3433
 
  • I. Chaikovska, L. Burmistrov, N. Delerue, A. Variola
    LAL, Orsay, France
 
  Fiber beam loss monitor (FBLM) is an attractive solution to measure intensity and position of the beam losses in the real time. It is a very useful tool, especially, for the commissioning and beam alignment. In this article we report on the development of the FBLM at PHIL (PHotoinjector at LAL, Orsay, France) as a prototype of the beam loss monitor for the ThomX machine, the compact Compton based X-ray source being in the construction phase in Orsay.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME086  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPME088 Study of Phase Reconstruction Techniques applied to Smith-Purcell Radiation Measurements 3436
 
  • N. Delerue, J. Barros, M. Vieille Grosjean
    LAL, Orsay, France
  • O.A. Bezshyyko, V. Khodnevych
    National Taras Shevchenko University of Kyiv, The Faculty of Physics, Kyiv, Ukraine
 
  Funding: Work supported by the France-Ukraine high energy physics laboratory and by the Université Paris-Sud (programme “attractivité") and the French ANR (contract ANR-12-JS05-0003-01).
Measurements of coherent radiation at accelerators typically give the absolute value of the beam profile Fourier transform but not its phase. Phase reconstruction techniques such as Hilbert transform or Kramers Kronig reconstruction are used to recover such phase. We report a study of the performances of these methods and how to optimize the reconstructed profiles.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME088  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPME089 On the Suitability of Longitudinal Profile Measurements using Smith-Purcell Radiation for Short High Current Proton Beams 3439
 
  • J. Barros, N. Delerue, M. Vieille Grosjean
    LAL, Orsay, France
  • I. Dolenc Kittelmann
    ESS, Lund, Sweden
  • C.A. Thomas
    Lund University, Lund, Sweden
 
  Funding: Financially supported by the Université Paris-Sud (programme "attractivité") and the French ANR (contract ANR-12-JS05-0003-01).
The use of Smith-Purcell radiation to measure electrons longitudinal profiles has been demonstrated at several facilities in the picosecond and sub-picosecond range. There is a strong interest for the development of non intercepting longitudinal profile diagnostics for high current proton beams. We present here results of simulations on the expected yield of longitudinal profile monitors using Smith-Purcell radiation for such proton beams.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME089  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPME093 Reconstruction of Longitudinal Electrons Bunch Profiles at FACET, SLAC 3453
SUSPSNE079   use link to see paper's listing under its alternate paper code  
 
  • M. Vieille Grosjean, J. Barros, N. Delerue, S. Jenzer
    LAL, Orsay, France
  • F. Bakkali Taheri, G. Doucas, I.V. Konoplev, A. Reichold
    JAI, Oxford, United Kingdom
  • C.I. Clarke
    SLAC, Menlo Park, California, USA
 
  The E-203 collaboration is testing a device on FACET at SLAC to measure the longitudinal profile of electron bunches using Smith-Purcell radiation. At FACET the electron bunches have an energy of 20GeV and a duration of a few hundred femtoseconds. Smith-Purcell radiation is emitted when a charged particle passes close to the surface of a metallic grating. The set-up installed in FACET consists in four targets (three gratings and a blank) on a carrousel on one side and eleven pyroelectric detectors on the opposite side, the beam passing between. At the moment, the measurement is averaged over a hundred pulses or more. We have studied the stability of the measurement from pulse to pulse and the resolution of the measure depending on the number of grating used.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME093  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)