IPAC2014 - List of Authors (Cautero, M.)

Paper	Title	Page
MOPME054	Upgrade of the Elettra Magnet Power Supply Controllers	495
	S. Cleva, M. Cautero, T.M. Cieśla, M. Lonza, L. Pivetta, C. Scafuri, R. Visintini Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Ageing of devices and components phasing-out, as well as the increasing maintenance costs, affect particle accelerators similarly to any industrial plant. A careful maintenance plan can cope with these problems in the medium-term, but then a complete update of the oldest parts is required. The most recent technologies available on the market together with a modular and open design approach are the basis of an upgrade program aimed at replacing the existing controllers of the Elettra storage ring magnet power supplies. The design considerations, the constraints and the first results are reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME054
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRI085	The Elettra 3.5 T Superconducting Wiggler Refurbishment	2687
	D. Zangrando, R. Bracco, D. Castronovo, M. Cautero, E. Karantzoulis, S. Krecic, G.L. Loda, D. Millo, L. Pivetta, G. Scalamera, R. Visintini Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy S.V. Khrushchev, N.A. Mezentsev, V.A. Shkaruba, V.M. Syrovatin, O.A. Tarasenko, V.M. Tsukanov, A.A. Volkov BINP SB RAS, Novosibirsk, Russia
	A 3.5 Tesla 64 mm period superconducting wiggler (SCW) was constructed by the Russian Budker Institute of Novosibirsk (BINP) and installed in the Elettra storage ring as a photon source for the second X-ray diffraction beamline in November 2002, but never used due to the lack of the funding required for the beamline construction. About three years ago, the beamline construction was finally funded together with the refurbishment of the SCW. This upgrade, that was necessary in order to make the SCW operations compatible with the top up mode of the storage ring aimed in a drastic reduction of the liquid helium consumption by means of replacing the cryostat with a new version. At the same time the upgrade aimed as well to improve the reliability of the cryostat, to update the control system and to verify the magnetic field performance after a very long time of inactivity. In this paper we present and discuss the performances of the SCW following its refurbishment carried out by BINP team and its re-commissioning in the Elettra storage ring.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI085
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Upgrade of the Elettra Magnet Power Supply Controllers

495

S. Cleva, M. Cautero, T.M. Cieśla, M. Lonza, L. Pivetta, C. Scafuri, R. Visintini
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Ageing of devices and components phasing-out, as well as the increasing maintenance costs, affect particle accelerators similarly to any industrial plant. A careful maintenance plan can cope with these problems in the medium-term, but then a complete update of the oldest parts is required. The most recent technologies available on the market together with a modular and open design approach are the basis of an upgrade program aimed at replacing the existing controllers of the Elettra storage ring magnet power supplies. The design considerations, the constraints and the first results are reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPME054

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRI085

The Elettra 3.5 T Superconducting Wiggler Refurbishment

2687

D. Zangrando, R. Bracco, D. Castronovo, M. Cautero, E. Karantzoulis, S. Krecic, G.L. Loda, D. Millo, L. Pivetta, G. Scalamera, R. Visintini
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
S.V. Khrushchev, N.A. Mezentsev, V.A. Shkaruba, V.M. Syrovatin, O.A. Tarasenko, V.M. Tsukanov, A.A. Volkov
BINP SB RAS, Novosibirsk, Russia

A 3.5 Tesla 64 mm period superconducting wiggler (SCW) was constructed by the Russian Budker Institute of Novosibirsk (BINP) and installed in the Elettra storage ring as a photon source for the second X-ray diffraction beamline in November 2002, but never used due to the lack of the funding required for the beamline construction. About three years ago, the beamline construction was finally funded together with the refurbishment of the SCW. This upgrade, that was necessary in order to make the SCW operations compatible with the top up mode of the storage ring aimed in a drastic reduction of the liquid helium consumption by means of replacing the cryostat with a new version. At the same time the upgrade aimed as well to improve the reliability of the cryostat, to update the control system and to verify the magnetic field performance after a very long time of inactivity. In this paper we present and discuss the performances of the SCW following its refurbishment carried out by BINP team and its re-commissioning in the Elettra storage ring.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRI085

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)