IPAC2014 - List of Authors (Almomani, A.)

Paper	Title	Page
THPME010	A 325 MHz High Gradient CH – Test Cavity for β=0.16	3229
	A. Almomani, U. Ratzinger IAP, Frankfurt am Main, Germany
	Funding: BMBF, contract no. 05P12RFRB9 This pulsed linac activity aims on compact designs, which means a considerable increase in voltage gain per meter. At IAP – Frankfurt, a CH – cavity was developed for these studies, where mean effective accelerating fields well above 10 MV/m are expected at 325 MHz, β=0.164. This cavity is developed within a funded project. Currently, the cavity is under construction and expected to be ready for copper plating in autumn 2014. The results might influence the rebuilt of the UNILAC – Alvarez section, which aims on achieving the beam intensities specified for the GSI – FAIR project. The new GSI 3 MW Thales klystron test stand will be very important for these investigations. Detailed investigations for two different types of copper plating can be performed on this cavity. In this work, the status of the cavity fabrication will be presented. Moreover, low temperature operation of copper cavities is discussed for the case of very short RF pulses.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME010
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A 325 MHz High Gradient CH – Test Cavity for β=0.16

3229

A. Almomani, U. Ratzinger
IAP, Frankfurt am Main, Germany

Funding: BMBF, contract no. 05P12RFRB9
This pulsed linac activity aims on compact designs, which means a considerable increase in voltage gain per meter. At IAP – Frankfurt, a CH – cavity was developed for these studies, where mean effective accelerating fields well above 10 MV/m are expected at 325 MHz, β=0.164. This cavity is developed within a funded project. Currently, the cavity is under construction and expected to be ready for copper plating in autumn 2014. The results might influence the rebuilt of the UNILAC – Alvarez section, which aims on achieving the beam intensities specified for the GSI – FAIR project. The new GSI 3 MW Thales klystron test stand will be very important for these investigations. Detailed investigations for two different types of copper plating can be performed on this cavity. In this work, the status of the cavity fabrication will be presented. Moreover, low temperature operation of copper cavities is discussed for the case of very short RF pulses.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME010

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)