IPAC2014 - List of Authors (Alkhimenko, E.A.)

Paper	Title	Page
MOPRI041	Electrons Injectors with Cathode Diameter of 6/15mm and New Cup Energy Input on the Wave E11 for Accelerators	692
	K.G. Simonov, E.A. Alkhimenko, T.A. Batkova, S.I. Grishin, A.V. Mamontov, G.I. Pravdikovskaya, E.A. Stroykov ISTOK, Moscow Region, Russia A.I. Shapovalov MRTI RAS, Moscow, Russia
	RPC "Istok" has created a number of electron injectors with voltage of 20-60kV and cathode diameter of 6-15mm of diode and triode designs. Injectors use the impregnated cathodes; the injector design allows rapid replacement of cathode assemblies. Injectors have been widely used in linear electron accelerators in Russia and Ukraine, in particular, in the sterilization accelerator center of JSC "MRTI RAS", Moscow, in the accelerator of the Russian Eye and Plastic Surgery Centre, Ufa. Have been proposed new input energy windows on the E11 wave, providing significant levels of transmission of the pulse power at high average power levels. Have been created two types of windows at 10-cm range, in which the ceramic disk made of ecologically clean alumina ceramic with diameter of 103mm and thickness of 13mm is used. In the first type of windows the heat transfer is provided from the peripheral portion, and in the second type of window – both from peripheral and central portions of the ceramic disk. These windows are used in accelerator of FSUE "NIIEFA" (St.Petersburg), installed at Izhora mill for testing the welding seals of atomic reactors and in accelerator of JSC "MRTI RAS".
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI041
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Electrons Injectors with Cathode Diameter of 6/15mm and New Cup Energy Input on the Wave E11 for Accelerators

692

K.G. Simonov, E.A. Alkhimenko, T.A. Batkova, S.I. Grishin, A.V. Mamontov, G.I. Pravdikovskaya, E.A. Stroykov
ISTOK, Moscow Region, Russia
A.I. Shapovalov
MRTI RAS, Moscow, Russia

RPC "Istok" has created a number of electron injectors with voltage of 20-60kV and cathode diameter of 6-15mm of diode and triode designs. Injectors use the impregnated cathodes; the injector design allows rapid replacement of cathode assemblies. Injectors have been widely used in linear electron accelerators in Russia and Ukraine, in particular, in the sterilization accelerator center of JSC "MRTI RAS", Moscow, in the accelerator of the Russian Eye and Plastic Surgery Centre, Ufa. Have been proposed new input energy windows on the E11 wave, providing significant levels of transmission of the pulse power at high average power levels. Have been created two types of windows at 10-cm range, in which the ceramic disk made of ecologically clean alumina ceramic with diameter of 103mm and thickness of 13mm is used. In the first type of windows the heat transfer is provided from the peripheral portion, and in the second type of window – both from peripheral and central portions of the ceramic disk. These windows are used in accelerator of FSUE "NIIEFA" (St.Petersburg), installed at Izhora mill for testing the welding seals of atomic reactors and in accelerator of JSC "MRTI RAS".

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI041

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)