The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Igor, I. AU - Army, R. AU - Brown, P. AU - Locke, S. AU - Rizzo, R. AU - Snyder, R. AU - Solomon, G. AU - Tracy, M. AU - Treado, T.A. ED - Petit-Jean-Genaz, Christine ED - Arduini, Gianluigi ED - Michel, Peter ED - Schaa, Volker RW TI - VIL410, CPI’s 1.3 GHz, 25 kW CW IOT Amplifier System J2 - Proc. of IPAC2014, Dresden, Germany, June 15-20, 2014 C1 - Dresden, Germany T2 - International Particle Accelerator Conference T3 - 5 LA - english AB - The VIL10 Heatwave™ Inductive Output Tube (IOT) amplifier system has been developed to meet the requirements of superconducting RF accelerators. Two VIL410 systems were completed and delivered in April 2014. The VKL9130A1 IOT in the VIL410 provides up to 30 kW RF output power over a 5 MHz bandwidth centered at 1.30 GHz. It operates both CW and pulsed. The VIL410 amplifier has been designed to achieve very tight amplitude and phase control. The amplitude and phase ripple are specified to be better than 0.1% rms and better than 0.2 degrees rms, respectively. The stability of the output power is specified to be better than 0.2% over a 20 second period. In normal operation, smooth control of the output is accomplished via RF input from the low level system. The VIL410 uses CPI’s VSL3616 solid state power amplifier (SSPA) to drive the IOT. The VSL3616 is a 700 watt CW SSPA which operates at 250 watts CW in the VIL410. The VIL410 has an embedded processor that controls all internal functions of the amplifier system and interfaces directly to EPICS. The VIL410 can be operated locally using a LabView PC Host program or remotely by EPICS. PB - JACoW CP - Geneva, Switzerland SP - 2305 EP - 2307 KW - operation KW - controls KW - insertion KW - embedded KW - cathode DA - 2014/07 PY - 2014 SN - 978-3-95450-132-8 DO - 10.18429/JACoW-IPAC2014-WEPME023 UR - http://jacow.org/ipac2014/papers/wepme023.pdf ER -