IPAC2013 - List of Authors (Zhao, F.C.)

Paper	Title	Page
WEPFI028	RF System of the CSNS Synchrotron	2765
	H. Sun, W.L. Huang, X. Li, W. Long, H. Shi, C.L. Zhang, F.C. Zhao IHEP, Beijing, People's Republic of China
	The accelerator of China Spallation Neutron Source (CSNS) consists of a H− linac and a rapid cycling synchrotron (RCS). The protons injected into the RCS will be accelerated from 81MeV to 1.6GeV by the Ring RF system providing a maximum accelerating voltage of 165kV. The RF frequency sweeps from 1.02 MHz to 2.44 MHz. with a repetition rate of 25Hz. The ferrite-loaded RF cavities will be used in the ring RF system. Each cavity has own RF power tube amplifier, bias current supply and full digital LLRF control loops. The R&D of ring rf system have been completed, it compose of the prototypes of a full size ferrite loaded RF cavity, a high power tetrode amplifier, a switching type bias supply of 3000A and a full digital embedded controller of LLRF. CSNS ring RF system design and the results of the R&D will be described in this paper.

WEPME022	Overview of the CSNS/RCS LLRF Control System	2977
	X. Li, W. Long, H. Sun, C.L. Zhang, F.C. Zhao IHEP, Beijing, People's Republic of China
	The CSNS/RCS RF system consists of 8 ferrite-loaded RF cavities (h=2), each with individual digital LLRF control electronics. The injection and extraction energy of the beam are 80MeV and 1.6GeV respectively with a repetition rate of 25Hz. The RF system is designed to provide the maximum RF voltage of 165kV. The RF frequency range is from 1.02MHz at injection to 2.44MHz at extraction. The CSNS/RCS LLRF control system is based on FPGA, and composed of 7 control loops to achieve required acceleration voltage amplitude and phase regulation. A number of prototype and the first formal system have been completed and tested. In this paper we present an overview of the LLRF control system, and some operational results.

Paper

Title

Page

RF System of the CSNS Synchrotron

2765

H. Sun, W.L. Huang, X. Li, W. Long, H. Shi, C.L. Zhang, F.C. Zhao
IHEP, Beijing, People's Republic of China

The accelerator of China Spallation Neutron Source (CSNS) consists of a H− linac and a rapid cycling synchrotron (RCS). The protons injected into the RCS will be accelerated from 81MeV to 1.6GeV by the Ring RF system providing a maximum accelerating voltage of 165kV. The RF frequency sweeps from 1.02 MHz to 2.44 MHz. with a repetition rate of 25Hz. The ferrite-loaded RF cavities will be used in the ring RF system. Each cavity has own RF power tube amplifier, bias current supply and full digital LLRF control loops. The R&D of ring rf system have been completed, it compose of the prototypes of a full size ferrite loaded RF cavity, a high power tetrode amplifier, a switching type bias supply of 3000A and a full digital embedded controller of LLRF. CSNS ring RF system design and the results of the R&D will be described in this paper.

WEPME022

Overview of the CSNS/RCS LLRF Control System

2977

X. Li, W. Long, H. Sun, C.L. Zhang, F.C. Zhao
IHEP, Beijing, People's Republic of China

The CSNS/RCS RF system consists of 8 ferrite-loaded RF cavities (h=2), each with individual digital LLRF control electronics. The injection and extraction energy of the beam are 80MeV and 1.6GeV respectively with a repetition rate of 25Hz. The RF system is designed to provide the maximum RF voltage of 165kV. The RF frequency range is from 1.02MHz at injection to 2.44MHz at extraction. The CSNS/RCS LLRF control system is based on FPGA, and composed of 7 control loops to achieve required acceleration voltage amplitude and phase regulation. A number of prototype and the first formal system have been completed and tested. In this paper we present an overview of the LLRF control system, and some operational results.