IPAC2013 - List of Authors (Veyrunes, E.)

Paper	Title	Page
MOPWO032	SPS Scraping and LHC Transverse Tails	957
	L.N. Drøsdal, K. Cornelis, B. Goddard, V. Kain, M. Meddahi, Ö. Mete, B. Salvachua, G. Valentino, E. Veyrunes CERN, Geneva, Switzerland
	All high-intensity LHC beams have to be scraped before extraction from the SPS to remove the non-Gaussian transverse tails of the particle distributions. The tail particles would otherwise cause unacceptably high losses during injection or other phases of the LHC cycle. Studies have been carried out to quantify the scraping using injection losses and emittance measurements from wire scanners as diagnostics. Beams scraped in the SPS were scraped again in the LHC with collimators to investigate possible tail repopulation. The results of these studies will be presented in this paper.

THPEA040	Design of a Magnetic Bump Tail Scraping System for the CERN SPS	3228
	Ö. Mete, J. Bauche, F. Cerutti, S. Cettour Cave, K. Cornelis, L.N. Drøsdal, F. Galleazzi, B. Goddard, L.K. Jensen, V. Kain, Y. Le Borgne, G. Le Godec, M. Meddahi, E. Veyrunes, H. Vincke, J. Wenninger CERN, Geneva, Switzerland A. Mereghetti UMAN, Manchester, United Kingdom
	The LHC injectors are being upgraded to meet the demanding beam specification required for High Luminosity LHC (HL-LHC) operation. In order to reduce the beam losses which can trigger the sensitive LHC beam loss interlocks during the SPS-to-LHC beam injection process, it is important that the beam tails are properly scraped away in the SPS. The current SPS tail cleaning system relies on a moveable scraper blade, with the positioning of the scraper adjusted over time according to the orbit variations of the SPS. A new robust beam tail cleaning system has been designed which will use a fixed scraper block towards which the beam will be moved by a local magnetic orbit bump. The design proposal is presented, together with the related beam dynamics studies and results from machine studies with beam.

Paper

Title

Page

SPS Scraping and LHC Transverse Tails

957

L.N. Drøsdal, K. Cornelis, B. Goddard, V. Kain, M. Meddahi, Ö. Mete, B. Salvachua, G. Valentino, E. Veyrunes
CERN, Geneva, Switzerland

All high-intensity LHC beams have to be scraped before extraction from the SPS to remove the non-Gaussian transverse tails of the particle distributions. The tail particles would otherwise cause unacceptably high losses during injection or other phases of the LHC cycle. Studies have been carried out to quantify the scraping using injection losses and emittance measurements from wire scanners as diagnostics. Beams scraped in the SPS were scraped again in the LHC with collimators to investigate possible tail repopulation. The results of these studies will be presented in this paper.

THPEA040

Design of a Magnetic Bump Tail Scraping System for the CERN SPS

3228

Ö. Mete, J. Bauche, F. Cerutti, S. Cettour Cave, K. Cornelis, L.N. Drøsdal, F. Galleazzi, B. Goddard, L.K. Jensen, V. Kain, Y. Le Borgne, G. Le Godec, M. Meddahi, E. Veyrunes, H. Vincke, J. Wenninger
CERN, Geneva, Switzerland
A. Mereghetti
UMAN, Manchester, United Kingdom

The LHC injectors are being upgraded to meet the demanding beam specification required for High Luminosity LHC (HL-LHC) operation. In order to reduce the beam losses which can trigger the sensitive LHC beam loss interlocks during the SPS-to-LHC beam injection process, it is important that the beam tails are properly scraped away in the SPS. The current SPS tail cleaning system relies on a moveable scraper blade, with the positioning of the scraper adjusted over time according to the orbit variations of the SPS. A new robust beam tail cleaning system has been designed which will use a fixed scraper block towards which the beam will be moved by a local magnetic orbit bump. The design proposal is presented, together with the related beam dynamics studies and results from machine studies with beam.