IPAC2013 - List of Authors (Sui, Y.F.)

Paper	Title	Page
MOPME031	Emittance Measurement with Multi-wire Scanners for BEPC-II Linac	541
	H. Geng, W.B. Liu, W. Qiao, Q. Qin, Y.F. Sui, Y. Yue IHEP, Beijing, People's Republic of China
	During the BEPC-II linac upgrade, five wire scanners have been installed in the common transport line, which makes a fast emittance measurement possible. In this paper, we will show the primary results of BEPC-II linac emittance measurement using multi-wire scanner method. The least squares method will be used for data analysis. A comparison of the results with the ones obtained by quad scan method will also be given.

MOPME033	Wire Scanner Emittance Measurement and Software Design at BEPCII	544
	W. Qiao, Z. Duan, H. Geng, W.B. Liu, Y.F. Sui IHEP, Beijing, People's Republic of China
	Wire scanners are diagnostic devices to measure the beam profile. Resent years, BEPCII adopts wire scanner measurement system for accurate beam size and emittance measurements. Beam emittance measurements can be performed with no adverse impact on beam and no interruption to normal machine operation. The BEPCII wire scanner system includes sets of four scanners in linac by which the linac output emittance is determined. In order to make the measurement procedure automated and easily accessible to all operators, wire scanner measurement software is developed. The software can obtain real-time signal data from the Experimental Physics and Industrial Control System(EPICS) and emittance calculation, phase chart and optics envelope display will be done. In this paper we describe the construction, performance and uses of BEPCII wire scanners measurement system and software.

THPWO040	Progress of Injector-1 and Main Linac of Chinese ADS Proton Accelerator	3854
	Y.L. Chi, J. Cao, J.P. Dai, H. Dong, L. Dong, T.M. Huang, X. Jing, S.P. Li, Z. Li, Z.Q. Li, Z.C. Liu, F. Long, Z. Ma, H.F. Ouyang, W.M. Pan, Q.L. Peng, P. Su, Y.F. Sui, J.Y. Tang, J.L. Wang, Q.B. Wang, Q. Ye, Z.S. Zhou IHEP, Beijing, People's Republic of China
	China ADS study program was Supported by the "Strategic Priority Research Program " of the Chinese Academy of Sciences at 2011, which aims to design and build an ADS demonstration facility with the capability of more than 1000 MW thermal power in about twenty years. The driver Linac is defined to be1.5 GeV in energy, 10mA in current and in CW operation mode. To meet the extremely high reliability and availability of ADS, the Linac is designed with much installed margin and fault tolerance. ADS accelerator is composed of two parallel 10MeV injectors and a main Linac. The superconducting acceleration structures are employed except the RFQs. This paper will present design of the China ADS accelerator and related key technology developments.

Paper

Title

Page

Emittance Measurement with Multi-wire Scanners for BEPC-II Linac

541

H. Geng, W.B. Liu, W. Qiao, Q. Qin, Y.F. Sui, Y. Yue
IHEP, Beijing, People's Republic of China

During the BEPC-II linac upgrade, five wire scanners have been installed in the common transport line, which makes a fast emittance measurement possible. In this paper, we will show the primary results of BEPC-II linac emittance measurement using multi-wire scanner method. The least squares method will be used for data analysis. A comparison of the results with the ones obtained by quad scan method will also be given.

MOPME033

Wire Scanner Emittance Measurement and Software Design at BEPCII

544

W. Qiao, Z. Duan, H. Geng, W.B. Liu, Y.F. Sui
IHEP, Beijing, People's Republic of China

Wire scanners are diagnostic devices to measure the beam profile. Resent years, BEPCII adopts wire scanner measurement system for accurate beam size and emittance measurements. Beam emittance measurements can be performed with no adverse impact on beam and no interruption to normal machine operation. The BEPCII wire scanner system includes sets of four scanners in linac by which the linac output emittance is determined. In order to make the measurement procedure automated and easily accessible to all operators, wire scanner measurement software is developed. The software can obtain real-time signal data from the Experimental Physics and Industrial Control System(EPICS) and emittance calculation, phase chart and optics envelope display will be done. In this paper we describe the construction, performance and uses of BEPCII wire scanners measurement system and software.

THPWO040

Progress of Injector-1 and Main Linac of Chinese ADS Proton Accelerator

3854

Y.L. Chi, J. Cao, J.P. Dai, H. Dong, L. Dong, T.M. Huang, X. Jing, S.P. Li, Z. Li, Z.Q. Li, Z.C. Liu, F. Long, Z. Ma, H.F. Ouyang, W.M. Pan, Q.L. Peng, P. Su, Y.F. Sui, J.Y. Tang, J.L. Wang, Q.B. Wang, Q. Ye, Z.S. Zhou
IHEP, Beijing, People's Republic of China

China ADS study program was Supported by the "Strategic Priority Research Program " of the Chinese Academy of Sciences at 2011, which aims to design and build an ADS demonstration facility with the capability of more than 1000 MW thermal power in about twenty years. The driver Linac is defined to be1.5 GeV in energy, 10mA in current and in CW operation mode. To meet the extremely high reliability and availability of ADS, the Linac is designed with much installed margin and fault tolerance. ADS accelerator is composed of two parallel 10MeV injectors and a main Linac. The superconducting acceleration structures are employed except the RFQs. This paper will present design of the China ADS accelerator and related key technology developments.