Author: Smith, E.N.
Paper Title Page
WEPWO060 The CW Linac Cryo-module for Cornell’s ERL 2444
 
  • R. Eichhorn, Y. He, G.H. Hoffstaetter, M. Liepe, T.I. O'Connell, P. Quigley, D.M. Sabol, J. Sears, E.N. Smith, V. Veshcherevich
    CLASSE, Ithaca, New York, USA
  
  Cornell University has proposed an energy-recovery linac (ERL) based synchrotron-light facility which can provide greatly improved X-ray beams due to the high electron-beam quality that is available from a linac. As part of the phase 1 R&D program, critical challenges in the design were addressed, one of them being a full linac cryo-module. It houses 6 superconducting cavities- operated at 1.8 K in cw mode- HOM absorbers and a magnet/ BPM section. We will present the design being finalized recently and report on the fabrication status that started in late 2012.  
 
WEPWO061 Readiness for the Cornell ERL 2447
 
  • G.H. Hoffstaetter, A.C. Bartnik, I.V. Bazarov, D.H. Bilderback, M.G. Billing, J.D. Brock, J.A. Crittenden, L. Cultrera, D.S. Dale, J. Dobbins, B.M. Dunham, R.D. Ehrlich, M. P. Ehrlichman, R. Eichhorn, K. Finkelstein, E. Fontes, M.J. Forster, S.J. Full, F. Furuta, D. Gonnella, S.W. Gray, S.M. Gruner, C.M. Gulliford, D.L. Hartill, Y. He, R.G. Helmke, K.M.V. Ho, R.P.K. Kaplan, S.S. Karkare, V.O. Kostroun, H. Lee, Y. Li, M. Liepe, X. Liu, J.M. Maxson, C.E. Mayes, A.A. Mikhailichenko, H. Padamsee, J.R. Patterson, S.B. Peck, S. Posen, P. Quigley, P. Revesz, D.H. Rice, D. Sagan, J. Sears, V.D. Shemelin, D.M. Smilgies, E.N. Smith, K.W. Smolenski, A.B. Temnykh, M. Tigner, N.R.A. Valles, V. Veshcherevich, A.R. Woll, Y. Xie, Z. Zhao
    CLASSE, Ithaca, New York, USA
  
  Funding: Supported by NSF award DMR-0807731 and NY State
Energy-Recovery Linacs (ERLs) are proposed as drivers for hard x-ray sources because of their ability to produce electron bunches with small, flexible cross sections and short lengths at high repetition rates. Cornell University has pioneered the design and hardware for ERL lightsources. This preparatory research for ERL-lightsource construction will be discussed. Important milestones have been achieved in Cornell's prototype ERL injector, including the production of a prototype SRF cavity that exceeds design specifications, the regular production of long-lived and low emittance cathodes, the acceleration of ultra-low emittance bunches, and the world-record of 65 mA current from a photoemission DC gun. We believe that demonstration of the practical feasibility of these technologies have progressed sufficiently to allow the construction of an ERL-based lightsource like that described in [erl.chess.cornell.edu/PDDR]. 		 
 
THOBB202
 Temperature Waves in SRF Research  
 
  • A. Ganshin, D.L. Hartill, G.H. Hoffstaetter, X. Mi, E.N. Smith, N.R.A. Valles
    CLASSE, Ithaca, New York, USA
  
  Previously Cornell University developed Oscillating Superleak Transducers (OST) to locate quench spots on superconducting cavities in superfluid helium. This work builds upon this research and presents a technique to automatically visualize quench locations from OST data [1]. This system is now fully automated. The current system consists of between 8 and 16 OSTs, a high gain low noise preamplifier, and a data acquisition card that can log up to 16 simultaneously recorded inputs. The developed software allows computing quench locations on various cavity geometries, adjustment of the location of each OST and a choice between several quench finding algorithms. Observed results are in excellent agreement with optical inspection and temperature map data.
http://newsline.linearcollider.org/2011/04/21/the-sound-of-accelerator-cavities 		 
slides icon Slides THOBB202 [3.166 MB]