IPAC2013 - List of Authors (Schubert, S.G.)

Paper	Title	Page
MOPFI081	Correlating Structure and Function - In situ X-ray Analysis of High QE Alkali-antimonide Photocathodes	464
	J. Smedley, K. Attenkofer, S.G. Schubert BNL, Upton, Long Island, New York, USA I. Ben-Zvi, X. Liang, E.M. Muller, M. Ruiz-Osés Stony Brook University, Stony Brook, USA T. Forrest, H.A. Padmore, T. Vecchione, J.J. Wong LBNL, Berkeley, California, USA J. Xie ANL, Argonne, USA
	Funding: The authors wish to acknowledge the support of the US DOE, under Contract No. KC0407-ALSJNT-I0013, DE-AC02-98CH10886 and DE-SC0005713. Use of CHESS is supported by NSF award DMR-0936384. Alkali antimonide photocathodes have high quantum efficiency and low emittance when illuminated by visible light, and are thought to be well suited for use in high-brightness photoinjectors of 4th generation light sources. Here we report on the growth of multi-alkali K2CsSb cathodes on [100] silicon substrates measured using in-situ X-ray diffraction (XRD) and X-ray reflection (XRR). Correlations between cathode structure and growth parameters and the resulting quantum efficiency (QE) are also explored. The best cathodes have a QE at 532 nm in excess of 6% and are structurally textured K2CsSb with grain sizes in excess of 20 nm. In an attempt to reduce the complexity of the current growth methodology we are also making alkali antimonides in parallel via the reaction of bulk materials in an inert environment. This approach has the advantage that the desired stoichiometry can be obtained exactly. Initial diffraction results from prepared bulk materials are promising and show the formation of well reacted K3Sb. In the future we intend to transfer this material to smooth thin photocathode films by either sputtering or pulsed laser deposition.

MOPFI005	XPS and UHV-AFM Analysis of the K2CsSb Photocathodes Growth	291
	S.G. Schubert HZB, Berlin, Germany I. Ben-Zvi, M. Ruiz-Osés Stony Brook University, Stony Brook, USA X. Liang SBU, Stony Brook, New York, USA H.A. Padmore, T. Vecchione LBNL, Berkeley, California, USA T. Rao, J. Smedley BNL, Upton, Long Island, New York, USA
	Funding: This work is funded by the Department of Energy, under Contract No. KC0407-ALSJNT-I0013, DE-SC0005713, the Bundesministerium für Bildung und Forschung (BMBF) and the state of Berlin, Germany. Next generation light sources, based on Energy Recovery Linac and Free Electron Laser technology will rely on photoinjector based electron sources. Successful operation of such sources requires reliable photocathodes with long operational life, uniform and high quantum efficiency, low thermal emittance and low dark current. The goal of this project is to construct a cathode which meets these requirements. Advances in photocathode research must take a combined effort. The materials have to be analyzed by means of chemical composition, surface structure and these findings have to be correlated to the quantum efficiency and performance in the injector. The presented work focuses on the chemical composition and surface structure of K2CsSb photocathodes. The XPS and AFM measurements were performed at the Center of Functional Nanomaterials at BNL. K2CsSb photocathodes were grown under UHV conditions. The components were adsorbed one at a time and after each growth step the corresponding XPS spectra was taken. During growth the quantum efficiency was recorded. As last step the sample was moved into the AFM without exposure to air to determine the surface roughness.

Paper

Title

Page

Correlating Structure and Function - In situ X-ray Analysis of High QE Alkali-antimonide Photocathodes

464

J. Smedley, K. Attenkofer, S.G. Schubert
BNL, Upton, Long Island, New York, USA
I. Ben-Zvi, X. Liang, E.M. Muller, M. Ruiz-Osés
Stony Brook University, Stony Brook, USA
T. Forrest, H.A. Padmore, T. Vecchione, J.J. Wong
LBNL, Berkeley, California, USA
J. Xie
ANL, Argonne, USA

Funding: The authors wish to acknowledge the support of the US DOE, under Contract No. KC0407-ALSJNT-I0013, DE-AC02-98CH10886 and DE-SC0005713. Use of CHESS is supported by NSF award DMR-0936384.
Alkali antimonide photocathodes have high quantum efficiency and low emittance when illuminated by visible light, and are thought to be well suited for use in high-brightness photoinjectors of 4th generation light sources. Here we report on the growth of multi-alkali K2CsSb cathodes on [100] silicon substrates measured using in-situ X-ray diffraction (XRD) and X-ray reflection (XRR). Correlations between cathode structure and growth parameters and the resulting quantum efficiency (QE) are also explored. The best cathodes have a QE at 532 nm in excess of 6% and are structurally textured K2CsSb with grain sizes in excess of 20 nm. In an attempt to reduce the complexity of the current growth methodology we are also making alkali antimonides in parallel via the reaction of bulk materials in an inert environment. This approach has the advantage that the desired stoichiometry can be obtained exactly. Initial diffraction results from prepared bulk materials are promising and show the formation of well reacted K3Sb. In the future we intend to transfer this material to smooth thin photocathode films by either sputtering or pulsed laser deposition.

MOPFI005

XPS and UHV-AFM Analysis of the K2CsSb Photocathodes Growth

291

S.G. Schubert
HZB, Berlin, Germany
I. Ben-Zvi, M. Ruiz-Osés
Stony Brook University, Stony Brook, USA
X. Liang
SBU, Stony Brook, New York, USA
H.A. Padmore, T. Vecchione
LBNL, Berkeley, California, USA
T. Rao, J. Smedley
BNL, Upton, Long Island, New York, USA

Funding: This work is funded by the Department of Energy, under Contract No. KC0407-ALSJNT-I0013, DE-SC0005713, the Bundesministerium für Bildung und Forschung (BMBF) and the state of Berlin, Germany.
Next generation light sources, based on Energy Recovery Linac and Free Electron Laser technology will rely on photoinjector based electron sources. Successful operation of such sources requires reliable photocathodes with long operational life, uniform and high quantum efficiency, low thermal emittance and low dark current. The goal of this project is to construct a cathode which meets these requirements. Advances in photocathode research must take a combined effort. The materials have to be analyzed by means of chemical composition, surface structure and these findings have to be correlated to the quantum efficiency and performance in the injector. The presented work focuses on the chemical composition and surface structure of K2CsSb photocathodes. The XPS and AFM measurements were performed at the Center of Functional Nanomaterials at BNL. K2CsSb photocathodes were grown under UHV conditions. The components were adsorbed one at a time and after each growth step the corresponding XPS spectra was taken. During growth the quantum efficiency was recorded. As last step the sample was moved into the AFM without exposure to air to determine the surface roughness.