IPAC2013 - List of Authors (Schoessow, P.)

Paper	Title	Page
TUPEA087	Experiment on Multipactor Suppression in Dielectric-loaded Accelerating Structures with a Solenoid Field	1319
	C.-J. Jing, S.P. Antipov, A. Kanareykin, P. Schoessow Euclid TechLabs, LLC, Solon, Ohio, USA C. Chang, L. Ge, L. Xiao SLAC, Menlo Park, California, USA M.E. Conde, W. Gai, R. Konecny, J.G. Power ANL, Argonne, USA S.H. Gold NRL, Washington, DC, USA
	Funding: US DoE SBIR Phase I project under contract #DE-SC0007629 Efforts by numerous institutions have been ongoing over the past decade to develop a Dielectric-Loaded Accelerating (DLA) structure capable of supporting high gradient acceleration when driven by an external rf source. Multipactor is the major issue limiting the gradient that was revealed in earlier experiments. A theoretical model predicts that the strength of solenoid field within an optimal range applied to DLA structures may completely block the multipactor. To demonstrate this approach, two DLA test structures have been built and the first high power test will be conducted in December 2012. The results will be reported.

TUPEA088	Argonne Flexible Linear Collider	1322
	C.-J. Jing, S.P. Antipov, A. Kanareykin, P. Schoessow Euclid TechLabs, LLC, Solon, Ohio, USA M.E. Conde, W. Gai, J.G. Power ANL, Argonne, USA
	We propose a linear collider based on a short rf pulse (~22ns flat top), high gradient (~120MV/m loaded gradient), high frequency (26GHz) two beam accelerator design. This is a modular design and its unique locally repetitive drive beam structure allows a flexible configuration to meet different needs. Major parameters of a conceptual 250GeV linear collider are presented. This preliminary study shows that an efficient (~5% overall), 4MW beam power collider may be achievable. The concept is extendable to the TeV scale.

WEPFI090	An X-band Dielectric-based Wakefield Power Extractor	2908
	C.-J. Jing, S.P. Antipov, A. Kanareykin, P. Schoessow Euclid TechLabs, LLC, Solon, Ohio, USA M.E. Conde, W. Gai, J.G. Power ANL, Argonne, USA V.A. Dolgashev, J.R. Lewandowski, S.G. Tantawi, S.P. Weathersby SLAC, Menlo Park, California, USA I. Syratchev CERN, Geneva, Switzerland
	Funding: US DoE SBIR Phase II project under Contract#DE-SC0004322 An X-band dielectric-based wakefield power extractor is under development to function as a high power rf source primarily for Two Beam Accelerator applications. A low surface electric field to gradient ratio and low fabrication cost are two main advantages of the dielectric-loaded accelerating/decelerating structure. We have designed a 12 GHz dielectric-based power extractor that has similar performance parameters to the CLIC PETS (23 mm beam channel, 240 ns pulse duration, 135 MW output per structure) using the CLIC drive beam. In order to study potential rf breakdown issues, as a first step we built a 11.424 GHz dielectric-based power extractor scaled from the 12 GHz design. A high power rf test will be conducted using the SLAC 11.424 GHz high power rf source in Dec. 2012. Results of the high power testing will be reported. Meanwhile, the 12 GHz fully featured dielectric power extractor is also under construction; construction progress and bench tests will be discussed.

Paper

Title

Page

Experiment on Multipactor Suppression in Dielectric-loaded Accelerating Structures with a Solenoid Field

1319

C.-J. Jing, S.P. Antipov, A. Kanareykin, P. Schoessow
Euclid TechLabs, LLC, Solon, Ohio, USA
C. Chang, L. Ge, L. Xiao
SLAC, Menlo Park, California, USA
M.E. Conde, W. Gai, R. Konecny, J.G. Power
ANL, Argonne, USA
S.H. Gold
NRL, Washington, DC, USA

Funding: US DoE SBIR Phase I project under contract #DE-SC0007629
Efforts by numerous institutions have been ongoing over the past decade to develop a Dielectric-Loaded Accelerating (DLA) structure capable of supporting high gradient acceleration when driven by an external rf source. Multipactor is the major issue limiting the gradient that was revealed in earlier experiments. A theoretical model predicts that the strength of solenoid field within an optimal range applied to DLA structures may completely block the multipactor. To demonstrate this approach, two DLA test structures have been built and the first high power test will be conducted in December 2012. The results will be reported.

TUPEA088

Argonne Flexible Linear Collider

1322

C.-J. Jing, S.P. Antipov, A. Kanareykin, P. Schoessow
Euclid TechLabs, LLC, Solon, Ohio, USA
M.E. Conde, W. Gai, J.G. Power
ANL, Argonne, USA

We propose a linear collider based on a short rf pulse (~22ns flat top), high gradient (~120MV/m loaded gradient), high frequency (26GHz) two beam accelerator design. This is a modular design and its unique locally repetitive drive beam structure allows a flexible configuration to meet different needs. Major parameters of a conceptual 250GeV linear collider are presented. This preliminary study shows that an efficient (~5% overall), 4MW beam power collider may be achievable. The concept is extendable to the TeV scale.

WEPFI090

An X-band Dielectric-based Wakefield Power Extractor

2908

C.-J. Jing, S.P. Antipov, A. Kanareykin, P. Schoessow
Euclid TechLabs, LLC, Solon, Ohio, USA
M.E. Conde, W. Gai, J.G. Power
ANL, Argonne, USA
V.A. Dolgashev, J.R. Lewandowski, S.G. Tantawi, S.P. Weathersby
SLAC, Menlo Park, California, USA
I. Syratchev
CERN, Geneva, Switzerland

Funding: US DoE SBIR Phase II project under Contract#DE-SC0004322
An X-band dielectric-based wakefield power extractor is under development to function as a high power rf source primarily for Two Beam Accelerator applications. A low surface electric field to gradient ratio and low fabrication cost are two main advantages of the dielectric-loaded accelerating/decelerating structure. We have designed a 12 GHz dielectric-based power extractor that has similar performance parameters to the CLIC PETS (23 mm beam channel, 240 ns pulse duration, 135 MW output per structure) using the CLIC drive beam. In order to study potential rf breakdown issues, as a first step we built a 11.424 GHz dielectric-based power extractor scaled from the 12 GHz design. A high power rf test will be conducted using the SLAC 11.424 GHz high power rf source in Dec. 2012. Results of the high power testing will be reported. Meanwhile, the 12 GHz fully featured dielectric power extractor is also under construction; construction progress and bench tests will be discussed.