IPAC2013 - List of Authors (Roth, I.)

Paper	Title	Page
MOPWA067	Robust High-average-power Modulator	834
	I. Roth, N. Butler, M.P.J. Gaudreau, M.K. Kempkes Diversified Technologies, Inc., Bedford, Massachusetts, USA
	Funding: US DOE. Grant No. DE-SC0004254 Diversified Technologies Inc. (DTI) designed a modulator which meets the requirements of the Spallation Neutron Source (SNS) modulators at Oak Ridge National Laboratory and will be less expensive than copies of the current modulators. The SNS modulators, under development for a decade, still do not meet the specifications for voltage, droop, or pulsewidth. The modulators must provide pulses of 85 kV, 165 A, with pulsewidths of 1.5 ms and voltage flatness of 1%. The current modulator switches the full power at high frequency during each pulse, and has a complex output transformer. DTI designed a modulator that meets all specifications and is less expensive. The proposed design is cheaper because there is an HV switch that operates at full current only once per pulse, a corrector that switches only 5% of the power at high frequency, a low-cost transformer-rectifier power supply, and no output transformer. DTI’s patented switch uses IGBTs, allowing the switch to operate at full capacity even if 20% of the devices fail. The modulator will be installed in 2013 at SNS to test klystrons. DTI will present the system components of the design as well as the performance results to date.

Paper

Title

Page

Robust High-average-power Modulator

834

I. Roth, N. Butler, M.P.J. Gaudreau, M.K. Kempkes
Diversified Technologies, Inc., Bedford, Massachusetts, USA

Funding: US DOE. Grant No. DE-SC0004254
Diversified Technologies Inc. (DTI) designed a modulator which meets the requirements of the Spallation Neutron Source (SNS) modulators at Oak Ridge National Laboratory and will be less expensive than copies of the current modulators. The SNS modulators, under development for a decade, still do not meet the specifications for voltage, droop, or pulsewidth. The modulators must provide pulses of 85 kV, 165 A, with pulsewidths of 1.5 ms and voltage flatness of 1%. The current modulator switches the full power at high frequency during each pulse, and has a complex output transformer. DTI designed a modulator that meets all specifications and is less expensive. The proposed design is cheaper because there is an HV switch that operates at full current only once per pulse, a corrector that switches only 5% of the power at high frequency, a low-cost transformer-rectifier power supply, and no output transformer. DTI’s patented switch uses IGBTs, allowing the switch to operate at full capacity even if 20% of the devices fail. The modulator will be installed in 2013 at SNS to test klystrons. DTI will present the system components of the design as well as the performance results to date.