Author: Pan, W.M.
Paper Title Page
WEPWO018 Status of the IHEP 1.3 GHz Superconducting RF Program for the ILC 2355
  • J. Gao, Y.L. Chi, J.P. Dai, R. Ge, T.M. Huang, S. Jin, C. H. Li, S.P. Li, Z.Q. Li, H.Y. Lin, Y. Liu, Z.C. Liu, Q. Ma, Z.H. Mi, W.M. Pan, Y. Sun, J.Y. Zhai, T.X. Zhao, H.J. Zheng
    IHEP, Beijing, People's Republic of China
  The 1.3 GHz superconducting radio-frequency (SRF) technology is one of the key technologies for the ILC. IHEP is building an SRF Accelerating Unit, named the IHEP ILC Test Cryomodule (IHEP ILC-TC1), for the ILC SRF system integration study, high power horizontal test and possible beam test in the future. In this paper, we report the components test results and the assembly preparation of this cryomodule. Processing and vertical test of the large grain low-loss shape 9-cell cavity is done. Performance of the in-house made high power input coupler and tuner at room temperature reaches the ILC specification.  
WEPWO025 Preliminary Design of 325 MHz Half-Wave Resonator 2369
  • X.Y. Zhang, X. Chen, Z.Q. Li, Q. Ma, W.M. Pan, Y. Sun, G.W. Wang, Q.Y. Wang, B. Xu, G.Y. Zhao
    IHEP, Beijing, People's Republic of China
  Funding: This work is supported by the "Strategic Priority Research Program" of CAS.
The Half-Wave Resonator (HWR) has been widely used in proton and heavy ion accelerators, for it has particular advantages of accelerating low energy charged particles. Preliminary design of a 325 MHz β=0.12 superconducting HWR cavity has been proposed at Institute of High Energy Physics (IHEP). The basic geometric parameters choices of the cavity are based upon theoretical model and numerical calculation, and then the RF performances are optimized by extensive electromagnetic simulations. In this paper, the detailed mechanical analysis, frequency control, and the considerations for fabrication of the 325 MHz HWR cavity are also presented.
THPWO040 Progress of Injector-1 and Main Linac of Chinese ADS Proton Accelerator 3854
  • Y.L. Chi, J. Cao, J.P. Dai, H. Dong, L. Dong, T.M. Huang, X. Jing, S.P. Li, Z. Li, Z.Q. Li, Z.C. Liu, F. Long, Z. Ma, H.F. Ouyang, W.M. Pan, Q.L. Peng, P. Su, Y.F. Sui, J.Y. Tang, J.L. Wang, Q.B. Wang, Q. Ye, Z.S. Zhou
    IHEP, Beijing, People's Republic of China
  China ADS study program was Supported by the "Strategic Priority Research Program " of the Chinese Academy of Sciences at 2011, which aims to design and build an ADS demonstration facility with the capability of more than 1000 MW thermal power in about twenty years. The driver Linac is defined to be1.5 GeV in energy, 10mA in current and in CW operation mode. To meet the extremely high reliability and availability of ADS, the Linac is designed with much installed margin and fault tolerance. ADS accelerator is composed of two parallel 10MeV injectors and a main Linac. The superconducting acceleration structures are employed except the RFQs. This paper will present design of the China ADS accelerator and related key technology developments.  
THPWO041 The development of a high power input coupler for China ADS injector I RFQ 3857
  • T.M. Huang, X. Chen, R. Guo, H.Y. Lin, Q. Ma, F. Meng, H.F. Ouyang, W.M. Pan, X.H. Peng, Z. Zhang, G.Y. Zhao
    IHEP, Beijing, People's Republic of China
  A 325 MHz RFQ is designed to accelerate a beam current of 15 mA in CW mode with injection energy of 35 keV and output energy of 3.2 MeV for China Accelerator Driven sub-critical System (ADS) injector I. Total RF power of 320 kW has to be delivered into the RFQ cavity. For reliable operation, four input couplers are adopted to share the driven power. A coaxial loop type input coupler is developed. The coupler features a Tristan type RF window, a doorknob to realize the transition from a half-height WR2300 waveguide to a coaxial line and a coaxial line with a coupling antenna loop. Two prototypes of the window and inner conductor assemblies have been fabricated and received high power test. The prototypes were tested up to 100 kW CW RF power in traveling wave mode. This paper will describe the design, fabrication and high power test of the coupler in details.